Bedienungsanleitung Cuisinart FP-13D series (Seite 14 von 17) (Englisch)

650788

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

CLEANING, STORAGE AND

MAINTENANCE

• Keep your Cuisinart

Elemental

13-Cup Food

Processor ready to use on the kitchen counter.

When not in use, leave it unplugged.

• Keep the blades and discs out of reach

of children.

• All parts except the housing base are

dishwasher safe, and we recommend washing

them in the dishwasher on the top rack only.

Due to intense water heat, washing the work

bowl, cover and accessories on the bottom

rack may cause damage over time. Insert the

cover with the

feed tube facing up to ensure proper cleaning.

Insert the work bowl and pusher upside down for

drainage. Remember to unload the dishwasher

carefully wherever you have placed sharp

blades and discs.

• To simplify cleaning, rinse the work bowl,

cover, pusher and blade or disc immediately

after use so food won’t dry on them. Be sure

to position the pusher upside down for

drainage. If food lodges in the pusher, remove

it by running water through it, or use a bottle

brush.

• If you wash the blades and discs by hand, do

it carefully. When handling, use the plastic

hubs. Avoid leaving them in soapy water

where they may disappear from sight. To clean

the blades, fill the work bowl with soapy water,

hold the blade by its plastic center and move

it rapidly

up and down on the center shaft of the bowl.

Use of a spray attachment is also effective.

If necessary, use a brush.

• The work bowl is made of SAN plastic with

metal components. It should not be placed in

a microwave oven.

• The housing base may be wiped clean with

a soapy, nonabrasive material. Be sure to dry

it thoroughly.

• If the feet leave spots on the counter,

spray them with a spot remover and wipe

with a damp sponge.

• If any trace of the spot remains, repeat the

procedure and wipe the area with a damp sponge

and nonabrasive cleaning powder.

IMPORTANT: Never store any blade or disc on

the motor shaft. No blade or disc should be

placed on the shaft except when the processor

is about to be used.

MAINTENANCE: Any other servicing should be

performed by an authorized service

representative.

FOR YOUR SAFETY

• Like all powerful electrical appliances,

a food processor should be handled with care.

Follow these guidelines to protect yourself and

your family from misuse that could cause

injury.

• Handle and store blades and discs carefully.

Their cutting edges are very sharp.

• Never put blades or discs on the motor shaft

until the work bowl is locked in place.

• Always be sure that the blade or disc is down

on the motor shaft as far as it will go.

• Always insert the blade in the work bowl

before putting ingredients in bowl.

• When slicing, shredding or dicing food, always

use the pusher. Never put your fingers or

spatula

into feed tube.

• Always wait for the blade or disc to stop spinning

before you remove the pusher assembly or

cover from the work bowl.

• Always unplug the unit before removing food,

cleaning or putting on or taking off parts.

• Always remove work bowl from base of

machine before you remove the blade.

• Be careful to prevent the chopping/mixing

blade from falling out of the work bowl when

emptying the bowl. Remove it before tilting the

work bowl.

TECHNICAL DATA

The motor in your food processor operates on a

standard line operating current. The appropriate

voltage and frequency for your machine are

shown on a label on the bottom of the base.

An automatic, temperature-controlled circuit

breaker in the motor ensures complete

protection against motor burnout. If the

processor runs for an exceptionally long time

when chopping, mixing or kneading a thick or

heavy mixture in successive batches, the motor

may overheat. If this happens, the processor will

stop. Turn it off and wait for the motor to cool

before proceeding. It will usually cool within 10

minutes. In extreme cases, it could take an hour.

Safety switches prevent the machine from

operating when the work bowl or the cover is not

locked into position. The motor stops within

seconds when the motor is turned off; and when

the pusher assembly is removed, a fast-stop circuit

also enables the motor to stop within seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cuisinart FP-13D series Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cuisinart FP-13D series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info