Bedienungsanleitung Cuisinart FP-14 (Seite 16 von 20) (Englisch)

498294

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

CLEANING AND STORAGE

Keep your Cuisinart Elite Collection

™

14-Cup

Food Processor ready to use on the kitchen

counter. When not in use, leave it unplugged.

This food processor includes a storage case

with lock for safekeeping of blades and discs.

Keep the blades and discs out of the reach of

children.

All parts except the housing base are dishwasher

safe, and we recommend washing them in the

dishwasher on the top rack only. Due to intense

water heat, washing the work bowl, cover and

accessories on the bottom rack may cause

damage over time. Insert the cover with the feed

tube facing up to ensure proper cleaning of the

seal. (Note: The seal is not removable and water

will drain properly.) Insert the work bowl and

pushers upside down for drainage. Remember

to unload the dishwasher carefully wherever you

place sharp blades and discs.

To simplify cleaning, rinse the work bowl, cover,

pusher assembly and blade or disc immediately

after use so food won’t dry on them. Be sure to

place the pushers upside down for drainage. If

food lodges in the pusher, remove it by running

water through it, or use a bottle brush.

If you wash blades and discs by hand, do it

carefully. When handling, use the plastic hubs

on the blades and finger holes for the discs.

Avoid leaving them in soapy water where they

may disappear from sight. To clean the metal

blade, fill the work bowl with soapy water, hold

the blade by its plastic center and move it

rapidly up and down on the center shaft of the

bowl. Use of a spray attachment is also

effective. If necessary, use a brush.

The work bowl is made of polycarbonate plastic,

which is shatter resistant and heat resistant. It

should not be placed in a microwave oven, as

the aperture at the front of the pusher houses

the metal rod that activates the motor.

The housing base may be wiped clean with a

soapy, non-abrasive material. Be sure to dry

once clean.

Four rubber feet on the underside keep the base

from moving on most work surfaces when the

machine is processing heavy loads. If the feet

leave spots on the counter, spray them with a

spot remover and wipe with a damp sponge. If

any trace of the spot remains, repeat the

procedure and wipe the area with a damp

sponge and nonabrasive cleaning powder.

The Accessory Storage Case is made of a high-

impact plastic that has a smooth, easy-to-clean

surface. Occasionally wipe your Accessory

Storage Case with a cloth or sponge that has

been dipped in warm soapy water. To remove

stubborn spots, use a mild soap solution, then

wipe with a damp sponge. Do not put the

Accessory Storage Case in the dishwasher.

Blades, stem adapter and discs should always

be clean when they are put into the Accessory

Storage Case. The Accessory Storage Case is

not meant for temporary storage of soiled

blades between periods of use.

IMPORTANT: Never store any blade or disc on

the motor shaft. No blade or disc should be

placed on the shaft except when the processor

is about to be used.

FOR YOUR SAFETY

Like all powerful electrical appliances, a food

processor should be handled with care. Follow

these guidelines to protect yourself and your

family from misuse that could cause injury.

Handle and store metal blades and discs

carefully. Their cutting edges are very sharp.

Always place the stem adapter on the motor

shaft before assembling the discs.

Never put blades or discs on the motor shaft

until the work bowl is locked in place.

Always be sure that the blade or disc is down

on motor shaft as far as it will go.

Always insert chopping blade and dough blade

in the work bowl before putting ingredients in

bowl.

When slicing or shredding food, always use the

pusher. Never put your fingers or spatula into

feed tube.

Always wait for the blade or disc to stop

spinning before you remove the pusher

assembly or cover from the work bowl.

Always unplug the unit before removing food,

cleaning, or putting on or taking off parts.

Always remove work bowl from base of machine

before you remove chopping blade or dough

blade.

TECHNICAL DATA

The motor in your food processor operates on a

standard line operating current. The appropriate

voltage and frequency for your machine are

shown on a label on the bottom of the base.

An automatic, temperature-controlled circuit

breaker in the motor ensures complete

protection against motor burnout. If the

processor runs for an exceptionally long time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cuisinart FP-14 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cuisinart FP-14

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info