562737
4
Zoom out
Zoom in
Vorherige Seite
1/29
Nächste Seite
6
7
ENGLISH
ENGLISH
The loudspeakers come with a set of DALI CONNECT cables for use if you don’t use bi- amping/
wiring (does not apply to HELICON S600). The short CONNECT cables have spade lugs at both
ends which should be connected as shown in the diagram below. Connect the two red terminals
to each other and the two black terminals to each other.
DALI CONNECT CABLES
Generally, we recommend experimenting with the position of the speakers in your listening room
to get the best performance. Therefore, it is advisable to wait until you have found the final posi
-
tion for the loudspeakers before mounting the spikes.
On hard surfaces, we recommend
using the spikes without coasters
On soft surfaces (like a carpet) we recom-
mend using the spikes without coasters.
Please note that there is a risk of damaging
the surface underneath the carpet.
On soft surfaces (like a wood floor)
we recommend using the spikes
with coasters to avoid damage of
the surface.
DALI CONNECT on HELICON MK2
speakers.
DALI CONNECT on HELICON
speakers.
All HELICON/HELICON MK2 models can be bi-wired
(one set of cables for the bass and one set for the
midrange/tweeters) or bi-amped (one amplifier for
the bass and one for the midrange/tweeters). Please
use the DALI CONNECT cables (or similar) to connect
the low and high frequency sections, if you are not
bi-wiring/bi-amping the speakers (as described in the
previous section). Instead of DALI CONNECT cables,
you may also use a piece of loudspeaker cable.
BI-WIRING/BI-AMPING
Normal wiring
The high quality terminals on the HELICON/HELICON
MK2 loudspeakers accept the following types of
termination:
4 mm banana plugs
Loudspeaker cables with spade lugs
Bare wire ends
When using any of the options, make sure that
the screw terminals are firmly tightened for best
connection. Make certain that the cable ends are
firmly pushed into the terminals and that there are
no loose wires, which could cause a short circuit and
damage the amplifier.
Before connecting or disconnecting any cables, always turn off the amplifier to avoid electrical
shock or damage to your equipment.
For installation of the HELICON S600/S600MK2 subwoofers, skip the next two paragraphs – go
to the “Connection of HELICON S600/S600MK2” section.
CONNECTION
SCREW TERMINALS
Right
loudspeaker
Left
loudspeaker
Amplier
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dali HELICON wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Dali HELICON

Dali HELICON Bedienungsanleitung - Englisch - 7 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info