Bedienungsanleitung DeLonghi DDSX220 AriaDry Multi (Seite 1 von 4) (Englisch)

770082

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Read the separate safety instructions before using the appliance.

1. DESCRIPTION

1.1 Description of appliance (A)

A1. Air outlet louver

A2. Lifting handles

A3. Room sensor air intake

A4. Castors

A5. Water level viewing window

A6. Condensate collection tank

A7. Epa lter

A8. Silver ion dust lter

A9. Filter housing cover

A10. Continuous drain rubber stopper

A11. Continuous drain cap

A12. Continuous drain hose

1.2 Description of control panel (B)

B1. ON/STAND-BY button

B2. Ventilation button

B3. Dehumidifying button

B4. Wi-Fi button

B5. Swing button

B6. Dry button

B7. Timer button

1.3 Description of display(C)

C1. Full tank alarm

C2. EPA lter present symbol

C3. Ventilation mode active

C4. % Relative Humidity

C5. Wi-Fi symbol

C6. App control symbol

C7. Dry mode active

C8. Hours

C9. Dehumidifying mode active

C10. Low temperature alarm

C11. Remote timer symbol

C12. Local timer symbol

2. DOWNLOAD THE APP!

DE’LONGHI

DEʼLONGHI

This appliance can also be used with the app "Aria Dry De'Longhi"

that can be downloaded from the App Store®.

To gain access to all functions, a local network (Home WLAN)

with Internet access is required. Moreover, check that there

are no impediments to Internet access: Firewall, Proxy,

authentications, etc.

3. DRAINING THE CONDENSATE WATER

The condensate can be drained in 2 ways:

3.1 Draining into the tank

The condensate is drained directly into the tank (A6).

When the tank is full, the appliance stops and the display (C)

shows the tank alarm (C1). Proceed as follows:

1. Remove the tank (g. 1) and empty it into a sink or bathtub.

2. Replace the tank in its housing, making sure the handle is

properly positioned (g. 2).

3.2 Continuous external draining

If the appliance is used for long periods of time without the

possibility to regularly empty the tank, the continuous drain

function should be used.

Proceed as follows:

1. Remove the continuous drain cap (A11) from the spout,

turning it in an anti-clockwise direction, then remove the

continuous drain rubber stopper (A10) from the opening

(g. 3) (Watch out for any leaking water!)

2. Attach the condensate drain hose (A12) to the spout (g.

4).

3) Make sure the hose is positioned below the spout (g. 5) or

the water will ow back into the tank of the appliance.

Also make sure there are no kinks in the hose.

4. MODE SELECTION

Connect the appliance to the mains supply. Upon rst use, the

symbol will appear on the display and at the same time,

an acoustic signal will sound to indicate that the appliance is in

stand-by mode.

1. To turn the appliance on, touch the button (B1).

The appliance will operate in the previously set mode and

the air outlet louver (A1) will open in a preset position (g.

6).

2. If there is a blackout, when the power is restored the

appliance will resume operation in the previously set

operating mode.

Please note:

If the symbol (C1) appears on the display, the tank (A6)

needs to be emptied or properly positioned (see paragraph “3.1

Draining into the tank”).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi DDSX220 AriaDry Multi Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi DDSX220 AriaDry Multi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info