Bedienungsanleitung DeLonghi DDSX220 AriaDry Multi (Seite 2 von 4) (Englisch)

770082

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Air ltration

If the EPA lter (A7) is installed, in addition to operating in the

preset mode, the appliance will also lter the air in the room. In

this case, the symbol (C2) will appear on the display.

The lter is designed to last up to 9 months, based on 8-hour

daily usage at medium working load.

To maintain the eciency of ltration, see paragraph “5.3

Replacing the EPA lter”.

4.1 Dehumidifying mode

1. Touch the button (B3). The symbol (C9) will

blink on the display (g. 7).

2. The display shows the previously set relative humidity

value. When the symbol blinks, the setting can be

changed by repeatedly touching the button.

There are 5 dierent relative humidity settings ranging

from 30% (dry environment) to 70% (humid environment).

Depending on the environmental conditions, it may not be

possible for the appliance to reach the minimum settable

value. In these cases, it is recommended the heat the

environment that needs to be dehumidied.

3. When the symbol stops blinking, the display shows the

percentage of relative humidity in the room. The appliance

may take a few seconds to display the value of the relative

humidity in the room.

4. When the room reaches the preset relative humidity level,

the appliance stops dehumidifying and operates at a very

slow ventilation speed.

4.2 Dry mode

1. Touch the button (B6). The display shows the

symbol (C7) (g. 8).

Please note:

The appliance automatically operates at the maximum

dehumidifying capacity. Recommended for particularly humid

environments or to dry laundry more quickly.

4.3 Ventilation mode

1. Touch the button (B2). The display shows the

symbol (C3) and the selected speed (g. 9).

2. When the symbol blinks, the ventilation speed can be

adjusted by repeatedly pressing the button. the

display shows the number corresponding to the selected

speed (1 ⇒ LOW; 2 ⇒ MED; 3 ⇒ HIGH).

4.4 Swing function

1. Press the button (B5) . The air outlet louver (A1)

moves up and down, evenly distributing the air ow in the

room (g. 10).

2. To stop the louver in the desired position, touch the same

button again.

4.5 Timer function

The timer can be used to delay appliance start-up and shut-

down. This will avoid energy wastage, ensuring the appliance

operates only when needed.

The timer function can be programmed from either the control

panel or the app.

• If programmed from the control panel: the display shows

the symbol (C12) (g. 11).

• If programmed from the app: the display shows the

symbol (C11) (g. 12). To programme the timer from the

app, follow the instructions provided in the app.

How to programme delayed start-up

1. With the appliance in stand-by ( ), touch the

button (B7): the display will show the symbol and the

number relative to the selected hours (g.11);

2. Set the desired number of hours by repeatedly touching

the button.1, 2, 4, 6, 8, 12 hours can be selected.

3. After a few seconds, the appliance will return to stand-by

mode and the symbol will remain lit on the display.

4. After the programmed time, the appliance will turn on in

the previously set operating mode.

How to programme delayed shut-down

1. While the appliance is running, touch the button

(B7): the display shows the symbol and the relative

number of selected hours (g. 11);

2. Set the desired number of hours by repeatedly touching the

button. 1, 2, 4, 6, 8, 12 hours can be selected.

3. After a few seconds, the display returns to the current

operating mode and the symbol remains lit.

4. After the programmed time, the appliance will

automatically turn o.

Please note:

• Once the timer has been programmed, to see the remaining

time until start-up or shut-down, touch the

button once.

• To deactivate the timer function, press the button

twice. The symbol on the display will turn o.

4.6 Wi-Fi function

The appliance has a built-in Wi-Fi function. To activate or

deactivate this function, hold the button (B4) pressed

until the appliance emits two beeps. When the Wi-Fi function is

active, the display will show the Wi-Fi symbol (C5) with the

following operating modes:

- FIXED

this means the Wi-Fi functions are active and the

“Home WLAN” has been found

- SLOW FLASHING

this means the appliance is searching for the

“Home WLAN”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi DDSX220 AriaDry Multi Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi DDSX220 AriaDry Multi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info