Bedienungsanleitung DeLonghi EC785 - Dedica (Seite 2 von 8) (Englisch)

770039

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

low

medium

high

3. The lights start ashing in sequence;

4. Press the button corresponding to the required

temperature:

low medium high

5. The button ashes to indicate that the selection has

been saved.

The appliance exits the menu and is ready for use.

4.2 Setting water hardness

The light (B7) indicating that the coee maker needs descaling

comes on after a period of operation established according to

water hardness.

The appliance can also be programmed according to the hard-

ness of the mains water in the various regions so that descaling

needs to be performed more or less frequently.

Proceed as follows:

1. Access the settings menu;

2. Press the button to enter the water hardness selec-

tion mode. The lights corresponding to the current selec-

tion come on:

soft

medium

hard

3. The lights start ashing in sequence;

4. Press the button corresponding to the water hardness in

your area:

soft water

medium

water

hard water

<10°dH 10°dH - 20°dH >20°dH

<18°fH 18°fH - 36°fH >36°fH

<180mg/l CaCo3180-360mg/l CaCo3>360mg/l CaCo3

- The button ashes to indicate that the selection has

been saved.

The appliance exits the menu and is ready for use.

4.3 Adjusting auto-o (stand-by)

To save energy, an auto-o function turns the appliance o

when not used for a long period. To turn it back on again, press

any button on the control panel.

1. Access the settings menu;

2. Press the button to enter the auto-o time selection

mode. The lights corresponding to the current selection

come on:

9 min

30 min

3 hours

3. The lights start ashing in sequence;

4. Press the button corresponding to the required time:

9 min 30 min 3 hours

5. The button ashes to indicate that the selection has

been saved.

The appliance exits the menu and is ready for use.

4.4 Default values (reset)

This resets all menu settings and programmed quantities back

to the default values.

To reset the default values, proceed as follows:

1. Position the steam spout over the drip tray;

2. Access the settings menu;

3. Turn the steam dial to the position;

4. Press the button. The three lights ash simulta-

neously to conrm that the original settings have been

restored.

5. The and lights ash to indicate that the

steam dial must be closed again (○ symbol).

When the steam dial has been closed, the appliance is ready for

use.

5. HOW TO MAKE ESPRESSO COFFEE

5.1 Tips for a hotter coee

For hotter espresso coee, you should:

• You are recommended to warm the cups before making

coee by rinsing them with a little hot water.

• Attach the lter holder to the appliance with the lter in

place but without adding coee. Using the same cup

as will later be used to make the coee, press the 1 cup

button and deliver hot water into the cup to heat it.

• Raise the coee temperature in the settings menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi EC785 - Dedica Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi EC785 - Dedica

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info