Bedienungsanleitung DeLonghi PrimaDonna Class ECAM 550.75 (Seite 4 von 20) (Englisch)

687417

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

6. MENU SETTINGS

6.1 Rinsing

Use this function to deliver hot water from the coee spouts

(A8) and hot water spout (C6), if inserted, to clean and heat the

appliance’s internal circuit.

Place a container with a minimum capacity of 100ml under the

coee and hot water spouts (g. 8).

To enable the function, proceed as follows:

1. Press the selector (B2) corresponding to the " " symbol

(B5) to enter the menu;

2. Press the selector corresponding to " RINSING";

3. After a few seconds, hot water is delivered rst from the

coee spouts, then from the hot water spout (if inserted)

to clean and heat the appliance’s internal circuit. "RINSING

UNDERWAYPLEASE WAIT" appears on the display, togeth-

er with a progress bar which lls gradually as preparation

proceeds;

4. To interrupt rinsing, press the selector corresponding to "

STOP" or wait for rinsing to stop automatically.

Please note!

• If the appliance is not used for more than 3-4 days, when

switched on again, we strongly recommend performing

2/3 rinses before use;

• After cleaning, it is normal for the coee grounds container

(A10) to contain water.

6.2 Descaling

For instructions on descaling, see section “13. Descaling”.

6.3 Water lter

For instructions on how to install the lter (C4), see section”15.

Water softener lter”.

6.4 Beverages settings

In this section, you can consult your customised settings and, if

you wish, reset the default values for each beverage.

1. Press the selector (B2) corresponding to the " " symbol

(B5) to enter the menu;

2. Scroll through the menu items by pressing the selector cor-

responding to "NEXT>" until " BEVERAGES SETTINGS"

appears on the display;

3. Press the selector corresponding to " BEVERAGES

SETTINGS". The values for the rst beverage appear on the

display;

4. The reference user prole is highlighted on the display. The

values are displayed on vertical bars. The default value is

indicated by the symbol, while the current value is

highlighted by the solid part of the vertical bar;

5. To go back to the settings menu, press the selector corre-

sponding to " ESC". To scroll through and display the

beverages, press the selector corresponding to "NEXT>";

6. To reset the default values for the beverage displayed,

press the selector corresponding to " RESET";

7. "CONFIRM RESET?": to conrm press the selector corre-

sponding to "

" (to cancel, press the selector corre-

sponding to " ESC");

8. "DEFAULT VALUES SET": press "

The beverage has been reset to the default values. Proceed with

the other beverages or go back to the homepage by pressing the

arrow corresponding to " ESC" twice.

Please note!

• To change the beverages in another prole, go back to the

homepage, select the required prole (B11) and repeat the

procedure.

• To reset all the beverages in the prole to the default val-

ues, see section “7. aking coee”.

6.5 Auto-o (standby)

Auto-o can be set so that the appliance goes o after 15 or 30

minutes, or 1, 2 or 3 hours.

To programme Auto-o, proceed as follows:

1. Press the selector (B2) corresponding to the " " symbol

(B5) to enter the menu;

2. Scroll through the menu items by pressing the selector cor-

responding to "NEXT>" until " AUTO-OFF" appears on

the display;

3. Press the selector corresponding to " AUTO-OFF";

4. Select the required time interval by pressing the selec-

tion arrows corresponding to (increase) or

(decrease);

5. To conrm, press the selector corresponding to " OK";

6. Press the selector corresponding to " ESC" to go back to

the homepage.

Auto-o is now programmed.

6.6 Energy saving

Use this function to enable or disable energy saving. When en-

abled, the function reduces energy consumption in compliance

with European regulations.

To disable or enable "Energy Saving", proceed as follows:

1. Press the selector (B2) corresponding to the " " symbol

(B5) to enter the menu;

2. Scroll through the menu items by pressing the selector cor-

responding to "NEXT>" until " ENERGY SAVING" appears

on the display;

3. Press the selector corresponding to "ENERGY SAVING" to

disable ( ) or enable ( ) the function.

4. Press the selector corresponding to " ESC" to go back to

the homepage.

The corresponding symbol appears on the display to indicate

that the function has been enabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeLonghi PrimaDonna Class ECAM 550.75 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeLonghi PrimaDonna Class ECAM 550.75

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info