Bedienungsanleitung Denon AH-NCW500 (Seite 7 von 11) (Englisch)

583609

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Your Denon Globe Cruiser headphones feature integrated controls

and microphones for easy hands free phone conversations. The call

button on the left ear cup allows you to easily operate Bluetooth

compatible mobile phones once they’re paired with the headphones

(vpage3 “Pairing with a Bluetooth device”).

NOTE

The Bluetooth function will turn off automatically when a device is

connected using the audio cable, and calls using the headphones will

be disabled.

コールボタン

Call button

Making a call

There are 2 methods of making a phone call:

q dial the phone number manually using the paired mobile phone, or

w press the call button on the headphone once to use voice activated

call dialing. When you make a call, audio playback will be paused

temporarily until the call has been ended.

Answering an incoming call

When an incoming call is detected, you will hear the music pause and

a ringtone sound come over the headphones.

Press the call button once to answer the call.

Ending a call

To end a phone conversation, press the call button once. When the

call has ended, playback of the music that you’re listening to will

resume automatically.

Conducting Phone Calls

Using the call waiting function

Use either of the following methods to take an incoming call while a

call is in progress.

NOTE

Certain mobile phones may not support call waiting.

nEnd the current call and take the new call

When another incoming call is detected while a call is in progress,

press the call button one time.

nPut the current call on hold and take the new

call / switch to the on-hold call

Press and hold the call button for approx. 3 seconds.

Ignoring an incoming call

When an incoming call is detected, press and hold the call button for

approx. 3 seconds to ignore the call.

Switching from headphones to the mobile

phone during a call

Press and hold the call button for approx. 5 seconds or more to switch

from talking through the headphones to talking on the mobile phone

itself.

NOTE

This switching is not possible during the call waiting function. In such

cases, the switching must be performed at the mobile phone.

Other operations

Incoming call

detected Answer Press call button once

In standby

mode / during

audio playback

Redial Press call button two times

Voice dial /

voice-

activated call

Press call button one time

Call in progress End call Press call button one time

Mute on/off Press call button two times

•Spin the control wheel to adjust the volume level of the other caller’s

voice.

•In order to make a call using the headphones, the connected

Bluetooth device must support either HSP (Headset Proﬁle) or HFP

(Hands-Free Proﬁle).z

•In order to make or answer a call during audio playback, the connected

Bluetooth device must support either HSP (Headset Proﬁle) or HFP

(Hands-Free Proﬁle), and must also support A2DP.z

z Refer to the Bluetooth device’s owner’s manual for information on

supported Bluetooth proﬁles.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Denon AH-NCW500 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Denon AH-NCW500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info