614637
24
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
17
Basic operation
1
Press POWER.
The unit is powered ON, and DECK CHG. and the track selection
knob light up.
2
Select the input source for each channel using
channel input source switch knob.
For LINE1 and LINE2 input terminals, you can switch between
“PHONO” and “LINE”. For information about setting up these
terminals, see “Connecting external devices and MIC” in page
9.
3
Use LEVEL to adjust the input level.
The input level is displayed in the CUE master level meter.
4
Use HI/MID/LOW to adjust the audio quality.
5
Use the channel fader and cross fader to adjust the
volume.
6
Use MASTER LEVEL to adjust the output level.
n Adjust the cross fader curve
Adjusts the startup response of the cross fader.
Beforehand, use the cross fader assignment switch on the front panel
to set each channel to the cross fader A and B.
Turn X FADER CONTOUR to adjust the curve response of
the cross fader.
: Slow startup curve characteristics (nine steps).
: Sharp startup characteristics, with cut-in/cut-out.
Basic operation
MIC (Mic input)
1
Press MIC ON 1 to use MIC1 and MIC ON 2 to use
MIC2.
When you press the button, it lights up and the MIC input is
switched ON.
2
Use MIC1 LEVEL or MIC2 LEVEL to adjust the MIC
input level.
3
Use MIC1 HI/MID/LOW or MIC2 HI/MID/LOW to
adjust the MIC audio quality.
n Echoing the MIC input
q Press ECHO ON 1 to echo MIC1 and ECHO ON 2 to echo MIC2.
When you press the button, it lights up and the echo is
switched ON.
w Press ECHO ON 1 to echo MIC1 and ECHO ON 2 to echo MIC2.
n Enabling the ducking function
The ducking function detects the MIC input and attenuates the audio
signal level of the master output. This prevents MIC audio from being
inaudible under loud music.
Press DUCKING.
DUCKING lights up.
n Outputting MIC audio to external devices
You can output MIC audio together with the master audio from the
booth/send and REC output terminals.
Press POST.
POST lights up.




   













   













 

POWER
MIC1 HI/MID/LOW
PHONES
ECHO
PHONES
LEVEL
PAN
SPLIT CUE
CUE
MIC2 HI/MID/LOW X FADER CONTOUR
LEVEL
POST
MIC1 LEVEL
MIC2 LEVEL
MIC ON 1/2
DUCKING
ECHO ON 1/2
HI/MID/LOW
DECK CHG.
MASTER LEVEL
DECK CHG.
This section describes operations of the unit without using the DJ software.
For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.
For information about the buttons on the unit for operating the DJ software and their functions, see the following pages.
TRACTOR······Page 3, 4
Virtual DJ······Page 5, 6
Channel fader
Cross fader
Track selection
knob
Cross fader
assignment switch
Mixing mode selector switch
USB audio output source selector switch
Channel input
source switch
knob
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DN-MC6000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info