614637
29
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
22
Before use
Part names and
Functions
Connections
Basic
operations
Installing and setting up
supplied software
Troubleshooting
Index
Specifications
System diagram
USB settings
Other
functions
Other functions




   













   













 

LOAD A/B
CF MODE
PITCH BEND +/–
SHIFT
KEY LOCK
Track selection knob
Jog wheel
Fader lock function
With this function ON, if the pitch fader position does not match
the value stored in the memory of the unit during the DECK change
operation, MIDI commands are not sent. In this case, KEY LOCK
flashes.
If the pitch fader position matches the value stored in the memory
of the unit, MIDI commands start to be sent again, and the button
returns to the state before flashing.
Initially set to OFF.
n Set the Fader Lock function to ON
While pressing the SHIFT, press PITCH BEND + for
DECK A or B.
n Set the Fader Lock function to OFF
While pressing the SHIFT, press PITCH BEND for
DECK A or B.
Adjusting the touch sense sensitivity
The unit can control the sensitivity of the touch sensor for the Jog
wheel in 9 steps (–4 to 0 to +4).
“–4” is the lowest sensitivity, and “+4” is the highest sensitivity.
The default setting is “0”.
1
Hold down LOAD A/B, and CF MODE and switch on
the main unit power supply.
2
Press CF MODE, and switch the job wheel that you
want to adjust.
3
Rotate the track selection knob, and adjust the
sensitivity.
The button lights according to the set sensitivity.
Buttons
CUE1 CUE2 CUE3 CUE4
DECK
CHG.
EFX.1 EFX.2 EFX.3 EFX.4
Sensitivity -4 -3 -2 -1 0 +1 +2 +3 +4
If the jog wheel on the DECK side being adjusted detects a touch,
the job wheel changes from red to blue.
4
Press the track selection knob to memorize
adjustment data.
5
Press SHIFT for DECK A or B.
The mode switches back from the sensitivity adjustment mode
to the normal mode.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DN-MC6000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info