614616
4
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
4
ENGLISH
TABLE OF CONTENTS
z
Main features ..................................................................4
x
Installation .......................................................................4
c
Part names and functions ...........................................4, 5
v
Connections.....................................................................6
b
Fader start .......................................................................7
n
X-effect ............................................................................8
m
Replacing the crossfader.................................................9
,
Specifications ..................................................................9
ACCESSORIES
Please check to make sure the following items are included with the main unit in the carton:
q Operating instructions ....................................................1 w Connection cords (3.5 mm stereo mini cord) ..................2
1
MAIN FEATURES
CONGRATULATIONS! You have purchased the DENON
DN-X800 DJ mixer from DENON.
1. X-Effect
The X-Effect is a unique feature which is designed to work
with the DENON DN-2100F and DN-2600F CD players.
The fader start of the below functions can be used with the
Crossfader.
Sampler, Hot start brake/platter, Hot start 1, 2 (each drive).
2. CH. Fader and Crossfader start
The CD player can be started or stopped simply by
increasing or decreasing the level of the CH fader or by
using the cross fader left to right or right to left. (This
function can only be used when the DENON CD players
DN-1800F, DN-2100F or DN-2600F is connected to the
DN-X800.)
3. Digital outputs
The DN-X800 allows you to record directly to CD-R,
MiniDisc or a hard disk device through its exclusive coaxial
digital outputs.
The digital outputs maintains a constant 16 bit / 44.1 kHz
signal.
4. Digital inputs
The DN-X800 accepts up to 4 digital inputs.
Such as our family of performers, DN-1800F, DN-2100F
,
DN-2600F, DP-DJ151 or any device with a digital output.
The sampling frequency range can be 32 kHz, 44.1 kHz or
48 kHz.
5. Enhanced input/output terminals (Analog)
8 Line, 3 Phono, 2 microphone systems, 2 Main outputs,
Zone output, Booth output, Sub woofer output and tape
output are provided independently. Effect in/out terminals
are also provided for a external effects processor.
6. 3-Band equalizer/Gain
Bass, Mid, Treble and Gain controls are available on every
input channel.
7. Crossfader contour
This feature allows adjusting the shape of the Crossfader
response from a gentle curve for smooth, long running
fades, to the steep pitch required for top performance cut
and scratch effects.
8. Mic post
This feature will pass the Main Mic signal into the Zone,
Booth, Tape output and Digital output signal path.
In the OFF mode, the MIC signal will not be routed through
the above outputs.
2
INSTALLATION
When the DN-X800 is mounted inside a coffin or DJ booth, we
recommend leaving a 3 cm blank space above the mixer if
possible.
3
PART NAMES AND FUNCTIONS
(1) Front Panel
q MIC EQ controls
Contour the frequency response of the Main Mic input
-12 dB to +12 dB.
HI
Adjusts high-tone microphone sound -12 dB to
+12 dB.
At the center position, sound is flat.
MID
Adjusts mid-tone microphone sound -12 dB to +12 dB.
At the center position, sound is flat.
LOW
Adjusts low-tone microphone sound -12 dB to +12 dB.
At the center position, sound is flat.
w MAIN MIC level control
Adjusts the level of the Main Mic input.
e MAIN MIC ON/OFF button
Puts the Main Mic signal into the Main outputs signal
path.
When the button is pressed, the Main Mic is on and
the adjacent orange indicator lights.
r MIC POST ON/OFF button
Puts the Main Mic signal into the Zone, Booth Tape
and Digital out signal path.
When the button is pressed, the adjacent green
indicator lights.
t AUX MIC level control
Adjusts the level of the Aux Mic input.
y AUX MIC ON/OFF button
Puts the Aux Mic signal into the mixer signal path.
When the button is pressed, the Aux Mic is on and the
adjacent orange indicator lights.
u Source EQ controls
Contour the frequency response of the selected
inputs.
HI
Adjusts the high-tone sound -26 dB to +10 dB.
At the center position, sound is flat.
MID
Adjusts the mid-tone sound -26 dB to +10 dB.
At the center position, sound is flat.
LOW
Adjusts the low-tone sound -26 dB to +10 dB.
At the center position, sound is flat.
NOTE:
Clipping may occur if adjustments are set to harsh.
i GAIN level control
Adjusts the level of the selected input 0 to +10 dB.
o Source input select switch
Selects either a Phono/Line or Line input for the
source.
!0 LINE/DIGITAL input select switch
Selects either a Line (analog) or Digital Input for the
Source.
The adjacent green indicator flashes when the digital
signal is unlocked and remains lit when the digital
signal is locked.
NOTE:
You must first set the pitch slider to zero % of the
digital output source (CD, MD) before it's power is
turned on. If the green digital indicator is flashing on
the mixer, please perform the above steps.
!1 Source input fader (Ch. fader)
Controls the level of the selected Input.
!2 ZONE level control
Adjusts the level of the Zone outputs.
!3 ZONE METER button
When this button is pressed down and held, the meter
indicates the stereo level in the LEFT and RIGHT
meter output. The adjacent green indicator lights.
!4 BOOTH LEVEL control
Adjusts the level of the Booth outputs.
!5 MASTER LEVEL fader
Adjusts the level of the Main outputs. Signals from the
channels selected with the Assign switches will be
output using the Source input fader (Ch. fader) and the
Crossfader, while signals from other channels will be
outputs using the Source input fader (Ch. fader).
!6 Peak dB CUE/PROGRAM meter
Displays the output level following Master Level
adjustment, the peak level is held for 1 second.
Display range : -20 dB to +8 dB.
Can switch between two display mode. See below
@3.
!7 SUBWOOFER frequency control
Adjusts the cut off frequency of the low pass filter 40
Hz to 200 Hz.
The low adjustment, will effect the Subwoofer output.
!8 EFFECT LOOP MAIN button
Routes the Main signal through the external processor
attached to the EFFECT connectors on the rear.
When the button is pressed in, the adjacent orange
indicator lights. (When the processor isn't
attached,indicator blinks.)
!9 EFFECT LOOP MIC button
Routes the Main Mic signal through the external
processor attached to the EFFECT connectors on the
rear.
When the button is pressed in, the adjacent orange
indicator lights. (When the processor isn't
attached,indicator blinks.)
NOTE:
When the Effect Loop Main and Mic are on, the
signal of Mic is output to all the outputs regardless
of setting the Main Mic and the Post Mic.
BA
DIGITAL
+10dB
+10dB-26dB
-26dB
-26dB +10dB
+10dB
+10dB-26dB
-26dB
-26dB +10dB
+10dB
+10dB-26dB
-26dB
-26dB +10dB
+10dB
+10dB
+10dB-26dB
-26dB
-26dB
SUB WOOFER
MAXMIN
FREQ.
MIC
PWR
MASTERZONE
10
8
6
4
2
0
LEVEL
100
CUE/PGM
PHONES
100
LEVEL
PGM
PAN
CUE
STEREO
4
MIN
GAIN
MAX
3
MAX
HI
LOW
MID
MIN
2
MAXMIN
HIHI
LOW
MID
1
MAXMIN
GAIN
HI
LOW
MID
+10dB
+10dB
+10dB-26dB
-26dB
-26dB
HI
LOW
MID
100
100
MAIN MIC
MID
LOW
GAIN
+830113571520-10 5
R
PGM
CUE
L
+-853101357101520
ON/OFF
MIC POST
ON/OFF
AUX MIC
ON/OFF
CROSSFADER
CONTOUR
ASSIGN A
OFF
3
2
1
4
SAMP.
H/S 2
H/S 1
LINE2DIGITAL1
PH1/LN1 PH2/LN3
DIGITAL2
PH3/LN5
LINE6DIGITAL3
LINE7
DIGITAL4 LINE8
10
8
6
4
2
0
10
8
6
4
2
0
10
8
6
4
2
0
ASSIGN B
H/S 1
SAMP.
H/S 2
3
2
1
4OFF
10
8
6
4
2
0
EFFECT LOOP
BOOTH
METER
100
LEVEL
CUE
CH 4CH 3CH 2CH 1
L-CUE
R-PGMMONO
MIC
MAIN
LINE4
GAIN
CH FADER START
ON OFF
X
CROSS
FADER
START A
CROSS
START B
FADER
H/S
BRAKE
X
DJ MIXER
H/S
BRAKE
RESET
CH FADER START CH FADER START CH FADER STARTCH FADER START
Min. 3 cm
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Denon DN-X800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info