500140
14
Zoom out
Zoom in
Vorherige Seite
1/17
Nächste Seite
14
5 Maintenance
5 Maintenance
5.1 Emptying and cleaning the dust container
It is best to empty the dust container after each vacuuming session.
But empty the dust container at the latest:
- if the cleaning/emptying indicator (Fig. 9/A1) lights up;
- if the "MAX" marking (Fig. 9/B1) has been reached; or
- before prolonged storage or dispatch.
1. Switch off the appliance, ZChapter 4.3, “Switching off”.
2. Push the release button for the dust container (Fig. 9/A2).
3. Remove the dust container from its receptacle.
4. Empty the dust container by holding it low over a dustbin and only then
press the release button (Fig. 9/B2).
5. Also clean the central lamellae filter on this occasion, ZChapter 5.2,
“Cleaning central lamellae filter and motor protection filter”.
6. Remove any residual dust from the dust container using a dry cloth or
a soft brush, e.g. the supplied furniture brush.
7. Close the dust compartment bottom plate.
5.2 Cleaning central lamellae filter and motor protection filter
Clean the filters each time you clean the dust container, ZChapter 5.1,
“Emptying and cleaning the dust container”.
Clean the filters at the latest when the cleaning/emptying indicator
(Fig. 9/A1) lights up.
1. Switch off the appliance, ZChapter 4.3, “Switching off”.
2. Remove and empty the dust container, ZChapter 5.1, “Emptying and
cleaning the dust container”.
3. Remove the motor protection filter by pulling it upwards out of its holder
(Fig. 10/A).
4. Release the central lamellae filter by turning in the ‘open’ direction
(Fig. 11) and remove it along with the filter screen from the dust con-
tainer.
5. Hold the central lamellae filter with the filter screen low over a dustbin.
6. Separate the filter screen from the filter by holding the filter firmly and
turning the filter screen in the ‘open’ direction (Fig. 11).
7. Remove larger agglomerations of dirt from both filter elements by hand.
8. Brush out the central lamellae filter using the 2-in-1 combi brush sup-
plied.
9. If the filter elements are still dirty after this dry-brushing procedure, thor-
oughly rinse them by hand until all dirt is gone.
10. If a filter element is damaged or too dirty, replace it with a new one (or-
dering information ZChapter 5.4, “Spare parts and accessories”).
11. Put the new / cleaned and completely dry motor protection filter back
into its receptacle (Fig. 10/B).
12. Fit the filter screen back into the central lamellae filter by holding the fil-
ter firmly and turning the screen firmly in the ‘close’ direction (Fig. 12).
You will feel and hear the elements snap into place.
13. Insert the central lamellae filter back into the dust container and lock the
filter by turning it in the ‘close’ direction (Fig. 12). You will feel and hear
the filter snap into place.
14. Put the dust container back into its receptacle. You will feel and hear it
snap into place.
15. Check that the dust container is fitted securely.
ATTENTION:
Switch off the appliance before emptying the dust container. This will
prevent dust from damaging the appliance.
NOTE:
You can dispose of the contents of the dust container with your regular
domestic waste as long as it does not contain any substances not per-
mitted in domestic waste.
A
1
B
1
2
2
9
NOTE:
The dust container cannot be cleaned with the central lamellae filter fit-
ted.
ATTENTION:
The filter elements are washable, but may not be cleaned in dishwash-
ers or washing-machines. Also, do not use detergents or brushes with
hard bristles to clean the filters.
A
B
10
1.2.
open
OPEN
11
1. 2.
close
CLOSE
12
ATTENTION:
Let the filter elements dry for approx. 24 hours at room temperature after
wet cleaning. Only put them back into the appliance when they are com-
pletely dry.
Centrino X3.1.book Seite 14 Dienstag, 16. November 2010 4:58 16
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dirt Devil M2012-2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info