Bedienungsanleitung Easypix PulseOximeter PO2 (Seite 1 von 2) (Englisch)

731580

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

USER MANUAL

Product introduction

A Pulse Oximeter is a common device used to check oxygen

saturation (SpO²) and pulse rate.

It is a compact, reliable and durable physiological

monitoring device featuring an OLED display and powered

by batteries (not included).

Intended use

The Pulse Oximeter is reusable device and is intended for

spot checking the pulse oxygen saturation and pulse rate of

adults.

It should not be used for continuous monitoring – this

should only be done under the guidance of your doctor.

Restrictions

Use of the device is for adults only.

Please do not use the device for children, infants and

neonatal. The product is not suitable for children under

3 years because of choking hazard.

Safety instructions

The person using the Pulse Oximeter must have read the

instructions for use carefully.

This product should only be used to give an indicative or

reference reading. It should not be used to determine a

diagnosis without consultation with your doctor. Longer

term or ongoing use should only be under the guidance of

your doctor.

If you experience any discomfort in use, please stop

immediately and seek medical help.

When using the Pulse Oximeter the user should pay

attention to, and guarantee safety of the patient being

measured.

The Pulse Oximeter does not feature an alarm function. It

should not be used for continuous monitoring for an

extended period.

Damaged skin tissue can not be measured.

Do not use the device if it has been damaged in any way.

Do not use the device in any way other than that described

in this manual.

Do not to use the Pulse Oximeter during MRI (magnetic

resonance imaging) scanning or CT (Computed

To m o g ra p hy ) environment as the induced current could

potentially cause burns.

The device should not be modified, repaired or serviced in

any way by the end user.

Do not use the Pulse Oximeter in the presence of

flammable anesthetics, explosive substances, vapors or

liquids.

Ensure the device is always clean and free from dirt before

use.

Before cleaning the device, ensure it is turned off.

Do not use high pressure or high temperature to disinfect or

clean the device. Never use cleaning agents/disinfectants

other than those recommended.

The device is a factory sealed unit. Keep its surface dry and

clean, and prevent contact with liquids.

The Pulse Oximeter is precision device. Avoid pressure,

knocks, strong vibration or other mechanical damage.

Please store safely when not in use.

For disposal of Pulse Oximeter and accessories, follow local

regulations regarding disposal of such a device and

accessories. Do not dispose of randomly.

Use AAA alkaline batteries. Do not use carbon or poor

quality batteries. Remove the batteries if the product will

not be used for an extended period of time.

Avoid exposure to static electricity before using the Pulse

Oximeter.

When in use, keep the device away from radio receivers.

To av oi d e n ha nc ed el ec t rom a g n et ic ra di at i o n or r e duc e

anti-electromagnetic interference performance, only use

the device as configured.

Portable and mobile radio frequency communication

equipment can affect the normal use of the pulse oximeter.

Storage environment

The Pulse Oximeter should not be close to or stored with

other equipment.

Always store the device and small parts such as batteries

out of the reach of children.

Always ensure suitable supervision of patients or others

where the device is used on a lanyard.

Box contents

Pulse Oximeter, Lanyard, User manual EN/DE

Technical data

• OLED display

• SpO²: Measurement range: 70-100%

Accuracy: ±2% (70%-99%)

• Pulse rate:

Measurement range: 30-240bpm

Accuracy: ±2bpm

• Working voltage: DC3V

• Battery type: 2x 1.5V AAA alkaline batteries

are required (not included)

• Power consumption: < 30mA

• Automatic shutdown after 10 seconds

• Use environment: 5°-40°C

Storage environment: -10°-40°C

Ambient humidity: 15%-80%

Atmospheric pressure: 70kPa-106kPa

• Size: 58 x 32 x 34 mm

• Weight: 50g (with two AAA batteries)

Description of the product

POWER / FUNCTION BUTTON

Function description

The Pulse Oximeter is used to measure arterial oxygen

saturation (SpO²) and the pulse rate. Oxygen saturation

indicates the percentage of haemoglobin in the arterial

blood that is loaded with oxygen.

The Pulse Oximeter uses two light beams of different

wavelengths for measurement. These light beams strike the

inserted finger inside the housing and are put in relation to

each other during measurement. The arterial oxygen

saturation is then calculated and displayed on the Pulse

Oximeter.

1. Infrared Light Emitting 2. Infrared Light receiver

You can also find these instructions online

under the following link.

FR : Un manuel dans votre langue est disponible

sur Internet:

IT: Il manuale nella sua lingua può essere

trovato su Internet:

ES: Puede encontrar un manual en su idioma en

Internet:

PT: Um manual em seu idioma pode ser

encontrado na Internet:

PL: Instrukcję w swoim języku możesz znaleźć na

stronie:

SWE: En handbok på ditt språk finns på Internet:

NL: Een handleiding in uw taal vindt u op

internet:

www.easypix.info/download-

manuals/download/pulseoximeter-po2/

Easypix PulseOximeter PO2 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Easypix PulseOximeter PO2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info