14
Operating Sequence
Before using your tumble dryer for the first time,
we recommend to place a few damp cloths
inside the appliance and dry for 30 minutes.
There may be dust inside a brand new tumble
dryer.
Drying
1. Connect the appliance.
2. Open the door (see picture).
3. Load the items one at a time, shaking them
out loosely.
4. Close the door. Please check the laundry
does not get caught between the door and
filter.
5. Turn the selector dial to the desired
programme to switch the appliance on. To
switch the appliance off turn it to
“UIT/ARRET”.
Switching on the appliance for the first
time.
Language
When switching on the appliance for the first
time you must set the language in which you
want the indicators on the display to appear.
Important!
If the display is not showing any language,
the appliance has already been switched on
once. In such case, go to the chapter
«Change language» if you would like to
change the language setting.
Example:
Press the “Wijzigen” button until the desired
language appears in the display.
Press the EXIT button to confirm the
selection.
All indicators on the display will appear in
this language from now on.
Note:
If the undesired language has been set,
press the «Spin and Option» buttons
simultaniously for about 3 seconds in order
to change the language.
Follow the instructions as before.
Setting the time
You should set the time prior to the first
drying cycle and when changing to and from
daylight savings time. See «Clock setting»,
Menu.
6. Turn the selector dial, in order to select the
desired programme. The relevant message
will appear in the display.
The display will show the end cycle time
«Cycle end at» of the selected programme,
calculated on the basis of the maximum load
for each type of fabric. The Start/Pauze
button light will start flashing.
If the load of laundry to be dried is small, at
the beginning of the cycle the display will still
indicate the end cycle relevant to the
maximum load.
