16
12. Turn the programme selector dial to
“UIT/ARRET”; all the lights go out. The
appliance is switched off.
Remove the laundry.
If you open and then close the door before
turning the programme selector dial to
“UIT/ARRET”, the machine is ready to
perform another drying programme. The
display shows the selected programme,
duration of the programme and the
options required.
After each use
• Clean the filters (see page 18).
• Empty the water reservoir (see page 19).
Important!
If the drying programme has to be stopped
before it reaches the end, we recommend that
you turn the programme selector dial to position
«Cooling» and wait until the end of this phase
before removing the laundry. This will avoid a
build-up of heat inside the appliance. To do this
first turn the dial to “UIT/ARRET”» and then to
«Cooling» and press Start/Pauze button
.
Modifying the programme
To change a programme which is running, first
cancel it by turning the programme selector dial
to “UIT/ARRET”. Select the new programme
and press the Start/Pauze button.
