Bedienungsanleitung Electronics Line EL-2762 (Seite 2 von 2) (Englisch)

580183

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Page 2

DETECTOR MALFUNCTIONING

A malfunctioning unit is indicated by beep-sounding on and off

sequentially, i.e., beeping for 3 seconds with 3 seconds delay

between two beeps. If this occurs, unplug the detector from the

power source for 10 seconds and then plug the unit again. Should

the unit beep intermittently, DO NOT use this detector. Send the

malfunctioning unit for servicing.

TAKING CARE OF YOUR DETECTOR

You have to maintain the detector frequently to ensure it working

properly. Few tips are provided for you to take care of your detector:

1. Use a vacuum cleaner to clean the air vents occasionally to

keep them free of dust.

2. Push the Test button on your detector to test its operating

function once every week.

LED & BUZZER Indication

The LED light and buzzer turn on and/or off to indicate various

situations. There are four different light and buzzer operations:

Led

Color

Status

Meaning

Green

(Power)

Flashing (for 4

minutes)

Warm up (the status between

Power -Up and Normal operation)

Normal Condition (Power On)

RED

(Alarm)

Flashing +

Sequential Alarm

Sound

Alarm

Orange

(service)

Malfunction/ sensor interruption

ACTIONS TO TAKE WHEN ALARM SOUNDING

In case of harmful levels of gas being detected, your detector will

go into a continuous full alarm. Try to take the following necessary

actions immediately or evacuate the building:

(a) Widely open doors and windows

(b) Disconnect electrical appliances

(b) Avoid open fire

ACTIONS TO TAKE AFTER THE PROBLEM IS

CORRECTED

Once the problem about the gas presence in the premises has

been corrected, the alarm of the detector should be off. After

waiting for 10 minutes, push the Test button to test the detector so

that you can make sure that the detector is working properly again.

SPECIFICATIONS

ELECTRICAL

Power supply:

AC120V/AC230V – depending on model

Frequency:

~50/60Hz

Radio Frequency

868.65 MHz / 433.92 MHz

Supervision

Transmission:

15 min. - For 868.65 MHz model

65 min. - For 433.92 MHz model

Response Wave:

Less than 20% in the lower explosion

limit

Signal Volume:

Approximately 85 dB at a distance of 3

meters

Sensor Type

Hotwire

PHYSICAL

Size (L X W X H):

140 X 80 X 49 mm

ENVIRONMENTAL

Operating Temperature:

0C to 40C (32F to 122F)

Storage Temperature:

-20C to 60C (-4F to 140F)

Specifications are subject to change without prior notice. Should any

questions arise please contact your supplier.

RTTE Compliance Statement

Hereby, Electronics Line Ltd. declares that this equipment is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC. For the CE Declaration of

Conformity please refer to our website: www.electronics-line.com.

Electronics Line Ltd. Limited Warranty

EL and its subsidiaries and affiliates ("Seller") warrants its products to be free from

defects in materials and workmanship under normal use for 24 months from the date of

production. Because Seller does not install or connect the product and because the

product may be used in conjunction with products not manufactured by the Seller, Seller

can not guarantee the performance of the security system which uses this product.

Sellers' obligation and liability under this warranty is expressly limited to repairing and

replacing, at Sellers option, within a reasonable time after the date of delivery, any

product not meeting the specifications. Seller makes no other warranty, expressed or

implied, and makes no warranty of merchantability or of fitness for any particular purpose.

In no case shall seller be liable for any consequential or incidental damages for breach of

this or any other warranty, expressed or implied, or upon any other basis of liability

whatsoever. Sellers obligation under this warranty shall not include any transportation

charges or costs of installation or any liability for direct, indirect, or not be compromised or

circumvented; that the product will prevent any persona; injury or property loss by intruder,

robbery, fire or otherwise; or that the product will in all cases provide adequate warning or

protection. Buyer understands that a properly installed and maintained alarm may only

reduce the risk of intruder, robbery or fire without warning, but is not insurance or a

guaranty that such will not occur or that there will be no personal injury or property loss as

a result. Consequently seller shall have no liability for any personal injury, property

damage or loss based on a claim that the product fails to give warning. However, if seller

is held liable, whether directly or indirectly, for any loss or damage arising from under this

limited warranty or otherwise, regardless of cause or origin, sellers maximum liability shall

not exceed the purchase price of the product, which shall be complete and exclusive

remedy against seller. No employee or representative of Seller is authorized to change

this warranty in any way or grant any other warranty.

WARNING: This product should be tested at least once a week.

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of

used batteries according to local regulations.

Contacting Electronics Line Ltd.

International Headquarters:

Electronics Line Ltd.

14 Hachoma St., 75655

Rishon Le Zion, Israel

Tel: (+972-3) 963-7777

Fax: (+972-3) 961-6584

No part of this document may be reproduced in any form without prior

written permission from the publisher.

(CE is for 868.65 MHz model only)

Electronics Line EL-2762 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Electronics Line EL-2762

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info