Bedienungsanleitung Elro HA68S (Seite 31 von 34) (Englisch)

536725

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

-29-

-36-

Scroll through the menu until ‘2-1 Alarm Time’ is displayed. The current

setting will also be displayed. To change the setting press .

Enter the required alarm duration in units of 10s.e.g. enter 6 for a 60s alarm

duration (max setting 60, i.e. 600s/10mins).

Press to save and exit, or

Press to exit without saving.

Note: Following initiation of a Full Alarm condition the External Siren will

continue to sound until either the system is disarmed; or the Control Panel

Alarm Duration Time expires.

Press to return to top level System Setup menu.

INTERNAL SIREN

Default setting: ON

Scroll through the menu until ‘2-2 INT. Siren’ is displayed. The current setting

will also be displayed.

To change the setting press .

Press to enable the Siren, or

Press to disable the Siren.

EXTERNAL HARDWIRED SIREN

Default setting: ON

Scroll through the menu until ‘2-3 EXT. Siren’ is displayed. The current setting

will also be displayed.

To change the setting press .

Press to enable the Hardwired Siren, or

Press to disable the Hardwired Siren.

AUTO REPORT

The associated detectors will emit a radio signal to the Control Panel every one

hour as an aknowledgement of proper operation. If within a certain period of

time, the control panel does not receive a radio signal from the detectors. This

feature, if enabled, allows the Control Panel to show an abnormal indication as a

reminder.

Default setting: ON 12H

Scroll through the menu until ‘2-4 Auto Report Func.’ is displayed. The current

setting will also be displayed.

CODE LEARNING

This enables the Control Panel to be learned the ID from each detector.

Scroll through the menu until ‘Learning ID’ is displayed and press .

Pressing tamper switch on the detector will emit ID code to the Control Panel

instantly.

Three possibilities would happen as follows:

Learning OK – the ID code was learned by the Control Panel successfully.

Time Out – the time involved for learning the ID code is 60s. During this

duration, fail to press the tamper switch on the detector would result in overdue

programming.

ID Duplicate – the same ID code was learned by the Control Panel beforehand.

Try again for code learning.

NAME

Default setting: ‘No name’

Scroll through the menu until ‘:2 Zone Name’ is displayed. The current setting

will also be displayed.

To change the setting press .

Scroll through available options until the required setting is displayed.

Press to save and exit, or

Press to exit without saving.

TYPE

Each alarm zone may be programmed to operate in one of 5 different modes

depending on the type of alarm function it is required to perform. The following

alarm types are available:

Intruder

- provides standard intruder monitoring with normal ARM and PARTIAL ARM

functions.

24 Hour Intruder

- used to provide 24 hour monitoring of areas requiring continuous security

protection even while the system is Disarmed, (e.g. gun lockers). Activation of

any detector on a security zone will immediately initiate a Full Alarm condition.

Fire

- used to provide 24 hour monitoring of any Fire/Smoke detectors fitted to the

system. Activation of any detector will immediately initiate a Full Alarm

condition.

ENEN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elro HA68S Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elro HA68S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info