Bedienungsanleitung Emtec H510 (Seite 5 von 74) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

473755

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Setting Up Your Devices, cont.

Pressing Save shows screen (5) that instructs you to try a few other

keys on the remote to make sure you’ve found the correct code. Tip:

try keys like Menu, and Guide. Power might work yet you still might

not have the correct code. If several keys seem to work fine, press

Save Code. If some keys don’t work, select Change Code (or press

Back) to go back and find another code that works better. Selecting

Label lets you rename the device, e.g. you could call it My TV. You

can ignore this for now and try it later if you like. See pages 9, and

24 for more details on entering text to change labels.

(5)

(6)

(1)

(2)

(3)

(4)

(5)

Let’s assume for now that you go ahead and set up a TV, Cable, and SAT.

If you select No at screen (1) on the previous page the procedure will be similar to the above,

except that you will be searching through the entire library of codes for your device to find

the one that works best (instead of just searching through the codes for your brand of device,

e.g., Sony).

If you say Yes when asked if you know your Brand, but subsequently don’t find a code that

works, you are asked if you want to try again (in case you missed it), or try all the codes for

your device. If you try all codes for your device type, and still don’t find a code that works,

you can skip it.

Once you’ve gone through the Wizard and set up at least a TV, and

set up more devices, or skipped the rest of them, you arrive at screen

(1) to the right.

Press any digit key, say digit 4, to enter a channel number. This

takes you to screen (2). You can enter more digits if desired. The

channel number can include -/--, or OK, if your device requires it to

change channels, e.g. 472Ok, or -/--55.

Setting Up Your Favourites

Now you press the Side Key next to Pick Logo on screen (2). You

are shown a screen (3) of popular channel logos. You can select

Next (Side Key 10) or Back (Side Key 5) to see more logos. In this

example we pressed the 4 logo (Side Key 7). Screen (4) now shows

that we’ve chosen channel 4 and the 4 logo. Note, you could also

select the top left position which would display “4” as the favourite

rather than a logo.

The Default device is this case was Sat, but you can select Pick

Device to change it. In this case we changed it to TV. Make sure

you select the device that you want each favourite to control,

e.g. TV, Cable, or Sat.

If you want to add a label to the logo press the Side Key next to

Label. This is optional so if you don’t want to add a label to the

logo you can just select Save to save the setting for this favourite.

If you save this favourite, Set Favourite 2 of 10 is now shown at

the bottom of the screen to indicate that you can add another

favourite channel. Again just press a channel number key on the

remote, choose a logo and change the Device Type (if you want

to). Add a few more favourites (up to 10). You can add more later,

or delete or edit them later, or even reorder their positions. Select

Done when you’re finished setting up favourites.

If you select Label, you see the screen to the right with a small

label on top of the logo. Initially the label will be the channel number

for that logo. If you Save this, the logo will have a small label

representing the channel number for that logo in it’s bottom right

hand corner, see screen (5).

But you can type in a new label if you want one. You enter the new

name for the key using the numeric keys on the remote, in a similar

fashion to typing in text on a cell phone.

E.G. in this example we pressed the 3 key 3 times to enter the letter

F. Then we waited a second and pressed the 4 key repeatedly until

the letter I was displayed. Then we waited a second and pressed 8

to select V. Then we waited a second and pressed the 3 key to

select E. See below.

Note: “Triple tap” name entry works in a similar fashion to text

entry on a cell phone. Tap each numeric key to cycle through ALL

caps, numbers, and lower case letters. E.G., repeatedly pressing

the number 2 key cycles through A, B, C, 2, a, b, c. Pressing the 9

key cycles through W, X, Y, Z, 9, w, x, y, z. A “space” can be

selected with the 0 (zero) key. The number 1 key selects 1 . @ ? !

- & and : You can backspace an entry with the key to the left of the

0 (zero) key. Press OK (or the side key next to Save) to confirm

your new name.

Pressing Save Code at screen (5) takes you to screen (6) where you

set up a Cable box. You can quit at this point and set up other devices

later, or you can continue and set up other devices - SAT, DVR,

DVD, VCR, Audio, CD Player, or either of the 2 AUX devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Emtec H510 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info