Bedienungsanleitung Epson EB-1781W (Seite 158 von 183) (Englisch)

675125

158

Zoom out

Zoom in

Vorherige Seite

1/183

Nächste Seite

Solving Image or Sound Problems

158

Displaying From a Mac Laptop

If the message "No Signal" is displayed when projecting from a Mac laptop,

you need to set up the laptop for mirrored display. (See your laptop manual

for details.)

Open the System Preferences utility and select Displays.

Select the Display or Color LCD option, if necessary.

Click the Arrange or Arrangement tab.

Select Mirror Displays.

Solutions When "Not Supported" Message Appears

If the message "Not supported" is displayed, try the following solutions:

• Make sure the correct input signal is selected on the projector's Signal

menu.

• Make sure the computer's display resolution does not exceed the projector's

resolution and frequency limits. If necessary, select a different display

resolution for your computer. (See your computer manual for details.)

gg Related Links

• "Input Signal Settings - Signal Menu" p.119

• "Supported Monitor Display Resolutions" p.171

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:

• Press the [Auto] button on the remote control to optimize the image signal.

• Try adjusting the image position using the Position setting in the

projector's Signal menu.

• Press the [Aspect] button on the remote control to select a different image

aspect ratio.

• Change the Resolution setting in the projector's Signal menu according to

the signal for the connected equipment.

• If you zoomed into or out of the image using the [E-Zoom] buttons, press

the [Esc] button until the projector returns to a full display.

• Check your computer display settings to disable dual display and set the

resolution within the projector's limits. (See your computer manual for

details.)

• Check the resolution assigned to your presentation files to see if they are

created for a different resolution. (See your software help for details.)

• Make sure you selected the correct projection mode. You can select this

using the Projection setting in the projector's Extended menu.

gg Related Links

• "Input Signal Settings - Signal Menu" p.119

• "Projector Setup Settings - Extended Menu" p.123

• "Supported Monitor Display Resolutions" p.171

Solutions When the Image is not Rectangular

If the projected image is not evenly rectangular, try the following solutions:

• Place the projector directly in front of the center of the screen, facing it

squarely, if possible.

• Turn on automatic adjustment in the projector's Settings menu. The

projector automatically corrects the image every time you move the

projector.

s Settings > Keystone > H/V-Keystone > Auto H/V-Keystone

s Settings > Keystone > H/V-Keystone > Auto V-Keystone

• Press the [Screen Fit] button and adjust the image shape using the on-

screen display (EB‑1795F/EB‑1785W/EB‑1781W).

• If you adjusted the projector height using the projector feet, press the

keystone buttons on the projector to adjust the image shape.

• Adjust the Quick Corner setting to correct the image shape.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-1781W Seite 158

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-1781W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info