215208
5
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
Active window
Computer1 (Analog-RGB)
BNC Video
S-Video
Computer1
Computer2
DVI
The image can be changed directly by selecting the desired
image source with the [Source] button.
1. Press the button.
2. To view the images in more detail, switch to the active window.
Tilt the button to select an image and then press the
button.
3. Project the images in the active window.
Press the button.
If only one signal source is connected, images from that source will be projected automatically.
If more than one device is connected to the projector, use the [Source] button to select the image source to be projected.
Select the images to be projected.
To select images to be
projected while viewing
all images being input
(Preview Function)
If using the , or buttons to select the source, you can change the signal setting by
pressing the button repeatedly.
You may need to change the output destination using the
keyboard or by changing settings.
To change, hold down the key and press the key
(with a symbol such as or on it).
Once the setting is changed, projection will start after a short
period.
If images are still not projected after carrying out the above,
see p.12.
Computer documentation
User's Guide "Selecting an Image Source While
Viewing Projected Images (Preview Function)"
If the source does not
change to a laptop PC
After startup, change the Control
Panel adjustment so that mirroring
is active
Examples of changing output
NEC
Panasonic
TOSHIBA
IBM
SONY
FUJITSU
Macintosh
If the suggested solution in Help doesn't solve the
problem, unplug the power from the wall outlet and contact
your local dealer.
Help for the image
Help for the sound
Language selection (Language)
Help Menu
[ ]: Enter[ ]: Select [ ]: Exit
1. Press the button.
2. Use the button to select an item to view.
3. Press the button to view the item.
Press the button to return to the previous screen.
Press the button to cancel the Help function.
If you select any of the following items that are currently occurring, a setting
window will be displayed allowing you to make a direct adjustment.
If a problem occurs with the projector, the Help function uses on-screen displays to assist you in
solving the problem. It uses a series of menus in a question and answer format.
Language
There is no
sound
Volume
V-Keystone
Quick Corner
The color of the image is
abnormal
The image is disturbed
The image is not
displayed fully on the
screen
The image is distorted
The image is too dark
Auto Setup
(
The entire image seems to flicker
) Sync.
(Vertical line noise appears on the
screen) Tracking
Video Signal
Tracking
Position
Color
Tint
Brightness
Contrast
Brightness Control
Using the help function
Items that can be
adjusted from the Help
menus
User's Guide "Troubleshooting"
Troubleshooting
Language selection (
Language
)
Help for the soundHelp for the image
If the message "No Signal."
appears on the screen, you can
also use the Help function to
make the setting.
No image appears
on the screen.
Source
9300E-QRG_04-11
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson emp 8300 lcd projector wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info