Bedienungsanleitung Felisatti MTF250 (Seite 4 von 16) (Deutsch, Englisch, Spanisch)

502514

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

TECHNICAL DATA

Mitre saw MTF216/1100T MTF250/1500T

Absorbed power W 1100 1500

No-load speed / min 5000 4300

Cut at 90º/mitre (AxB Fig.4 a) mm 58x133 70x150

Cut at 45º/mitre (AxB Fig.4 b) mm 58x90 70x85

Cut at 90º/blade at 45º (AxB Fig.4 c) mm 35x1330 47x150

Cut on upper bench mm 31,5 45

Upper bench dimensions mm 224х358 264х385

Blade diameter mm 216 250

Blade hole diameter mm 20(30) 20(30)

Weight Kg 9,5 11

Overall dimensions (LxHxW) mm 427x277x531 460х450х300

Acoustic pressure, Lpa dBA 96 92

Sound power emitted, Lwa dBA 109 105

Vibration level (according to ISO 8041 and ISO 5348) m/sec2 2,5 3,9

Carefully observe the instructions in this manual, keep it in a safe

place at hand for any possible checks on the parts indicated.

If the tool is used with care and a normal maintenance is carried

out, it will have a long life.

GENERAL INFORMATION

DENTIFICATION (See indicated gures)

A Saw penetration adjustment screw (Fig.1a)

B Uptake connection nozzle (Fig.1,1a)

C Pushbutton switch (Fig.1)

D Safety hook release button (Fig.1)

E Switch lock button (Fig.1)

F Upper bench saw protector (Fig.3)

G Upper bench (Fig.1,1a)

H Upper bench blocking handles (Fig.2)

I Saw blade (Fig.1,2)

J Mobile guard (Fig.1)

K Turntable (Fig.1)

L Base (Fig.1,3)

M Fixed guide (Fig.1)

O Motor unit blocking lever (Fig.1)

P Position lock pin (Fig.1a)

Q Fixed saw protection, extractable (Fig.1а)

Q1 Protection button (Fig.1,1a)

R Scale index (Fig.1)

R1 Graduated scale for turning the motor unit (Fig.1)

R2 Graduated scale turntable (Fig.1)

S Guide xing buttery (Fig.1,2)

T Upper bench guide (Fig.1,3)

V Handles (Fig.3) (Optional accessory)

Y Bench xing bolt (Fig.1) (internal)

Z1 Adjustment bolt (Fig.1a)

Z2 AC cable (Fig.1)

Z3 Brush holder cover (Fig.1)

Z4 Clamp (Fig.5) (Optional accessory)

TECHNICAL CHARACTERISTICS

The robust and highly reliable structure makes these mitres

suitable for cutting wood, aluminium and steel in industrial

environments, while preserving their usual ease of handling and

without restricting their movement.

The MTF216/1100T and MTF250/1500T are tted with a wide

upper table that allows the mitre saw to be transformed into a

table saw to carry out cutting (up to a thickness of 45 millimetres).

The MTF216/1100T and MTF250/1500T are tted with two

working tables (upper and lower), and have been provided with a

switch to keep the circuit on while pressing, and a lock-on button

for free-hands operation when working on the upper bench.

The MTF216/1100T and MTF250/1500T are tted with a

new electronic device to prevent the machine from starting

unexpectedly after a break in the voltage supply. When this

happens, to restart you must oper-ate the switch to switch-off

and then to switch-on.

A single operator is needed to use the mitre saw, of which the

design and construction comply with stan-dards EN 61029-1 and

EN 60204-1.

SAFETY DEVICES

• Atrest,thebladeistotallycoveredbytwoprotec-tors,

one xed and one mobile, which are automati-cally opened by

the descent of the blade unit when cutting.

• On the upper bench, the blade is covered by one protection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Felisatti MTF250 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info