389403
3
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
42 Ferm
GB
3Ferm
ORBITAL SANDER
The numbers in the following text refer to the
drawing on page 2
For your own safety and that of others,
we recommend that you read this
instruction manual carefully before
using this machine. Keep this instruction
manual and the documentation provided
with the machine for future reference.
Introduction
The Orbital sander is designed for dry sanding of
surfaces of wood, plastic and filler as well as for
painter surfaces.
Contents
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
Technical specification
Voltage 230 V~
Frequency 50 Hz
Input power 180 W
Tool class II
No load speed 5000-10000/min
Lpa (Sound pressure level) 70.5 dB(A)
Lwa (Sound power level) 81.5 dB(A)
Vibration 4.31 m/s
2
Weight 2.4 kg
Contents of packing
1 Orbital sander
1 Sand paper (grain 80)
1 Dust bag
1 User manual
1 Warranty card
1 Safety instructions
Check the machine, loose parts and accessories
for transport damage.
Features
Fig. 1
1. On/off switch
2. Handle
3. Dust bag
4. Paper clamp
5. Handle paper clamp
6. Ventilating apertures
7. Sandpaper
8. Sanding sole
9. Handle (front)
10. Adjusting wheel
11.Lock-on button for on/off switch
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
The number of revolution of the machine
can be electronically set.
Wear a dust mask
Wear ear and eye protection.
Special safety instructions
Contact or inhalation of dust coming free during
sanding (e.g. lead painted surfaces, woods and
metals), can endanger the health of operator
and bystanders. Always wear appropriate
personal equipment as a dust mask and use
the dust bag during sanding.
Check that the switch is not in the “ON” position
before connecting the machine to the mains
voltage.
Always keep away the mains lead from moving
parts of the machine.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Use safety glasses, especially when sanding
above your head.
Immediately switch off the machine when:
Excessive sparking of the carbon brushes and
verticiliosis in the collector.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ferm fos-180 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info