461566
56
Zoom out
Zoom in
Vorherige Seite
1/73
Nächste Seite
Troubleshooting and tips
48 440 N00052
External monitor or television set connected
Ê Set the setting Display Settings to LCD BIOS-Setup in the menu Advanced - Video Features.
The LCD display panel is difficult to read
Reflection
Ê Turn the notebook or alter the tilt of the LCD display panel.
The external monitor stays blank
If your screen remains blank this may be due to the following:
Monitor is switched off
Ê Switch the external monitor on.
Power saving has been activated (screen is blank)
Ê Press any key to continue.
Brightness is set too dark
Ê Adjust the brightness of the monitor.
Screen output is set to the notebook’s LCD screen
Ê Press the key combination [Fn] + [F3] (selecting internal/external display).
The external monitor's power cable or data cable is not connected properly
Ê Switch off the external monitor and the notebook.
Ê Check whether the power cable is plugged properly into the power adapter and into the mains
outlet.
Ê Check whether the data cable is properly connected to the notebook and the external monitor
(if it is plugged in with a connector).
Ê Switch on the external monitor and the notebook.
The external monitor is blank or the image is unstable (under
Windows)
The wrong external monitor has been selected or the wrong screen resolution has been set for the
application programme.
Ê Terminate the application programme under Windows with [Alt] + [F4]. If the fault continues to
occur after ending the programme, switch over to the notebook's internal LCD screen with [Fn]
+ [F3]. Change the following setting:
Ê Select the correct monitor or set the correct screen resolution.
- Setting the screen resolution: Select Start – Settings – Control Panel – Display - Settings and
then the screen resolution you require in the Resolution field.
- Selecting the monitor: Select the correct monitor under Start – Settings – Control Panel -
Display – Settings – Advanced Properties – Monitor – Modify.
56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fujitsu Siemens AMILO D Series- La 1703 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fujitsu Siemens AMILO D Series- La 1703

Fujitsu Siemens AMILO D Series- La 1703 Bedienungsanleitung - Deutsch - 78 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info