Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
Edge
®
20/25
Owner’s Manual
June 2015 Printed in Taiwan 190-01884-00_0A
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Edge 20/25
    ®

    Owner’s Manual

    June 2015

    Printed in Taiwan

    190-01884-00_0A



  • Page 2

    All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
    right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
    changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
    Garmin , the Garmin logo, ANT+ , Auto Lap , Auto Pause , and Edge are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other
    countries. Garmin Connect™ and Garmin Express™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express
    permission of Garmin.
    ®

    ®

    ®

    ®

    ®

    The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Mac is a trademark of
    Apple Inc., registered in the U.S. and other countries. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
    ®

    ®

    ®

    This product is ANT+ certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
    ®

    M/N: A02643



  • Page 3

    Table of Contents

    Troubleshooting............................................................. 7

    Keys ............................................................................................ 1
    Status Icons ........................................................................... 1
    Installing the Standard Mount ..................................................... 1
    Releasing the Edge ................................................................ 1
    Going for a Ride .......................................................................... 1
    Charging the Device ................................................................... 1

    Updating the Software ................................................................ 7
    Support and Updates .................................................................. 7
    Getting More Information ............................................................ 7
    Maximizing Battery Life ............................................................... 7
    Acquiring Satellite Signals .......................................................... 7
    Resetting the Device ................................................................... 7
    Replacement O-rings .................................................................. 7
    Viewing Device Information ........................................................ 7

    Training........................................................................... 2

    Appendix......................................................................... 7

    Setting the Ride Mode ................................................................ 2
    Editing the Time, Distance, or Calorie Goal ........................... 2
    Changing the Ride Mode ....................................................... 2
    Training Indoors .......................................................................... 2
    Marking Laps .............................................................................. 2
    Using Auto Pause® .................................................................... 2
    Using Auto Scroll ........................................................................ 2
    Changing Data Fields ................................................................. 2

    Index................................................................................ 9

    Introduction.....................................................................1

    Data fields ................................................................................... 7
    Heart Rate Zone Calculations ..................................................... 8
    Software License Agreement ...................................................... 8

    History ............................................................................. 2
    Viewing Your Ride ...................................................................... 2
    Deleting a Ride ...................................................................... 2
    Personal Records ....................................................................... 2
    Viewing Your Personal Records ............................................ 2
    Deleting Personal Records .................................................... 3
    Viewing Bike Totals .................................................................... 3
    Resetting Bike Totals ............................................................. 3
    Garmin Connect .......................................................................... 3
    Using Garmin Connect ........................................................... 3
    Data Management ................................................................. 3
    Disconnecting the USB Cable ................................................ 3
    Bluetooth Connected Features ................................................... 3
    Pairing Your Smartphone with Your Edge 25 ........................ 3
    Turning Off Bluetooth Technology ......................................... 3
    Turning Off Smart Notifications .............................................. 3

    Navigation....................................................................... 4
    Courses ...................................................................................... 4
    Following a Course from the Web .......................................... 4
    Racing Against a Segment .................................................... 4
    Viewing Course Details .......................................................... 4
    Deleting a Course .................................................................. 4
    Course Options ...................................................................... 4

    ANT+ Sensors................................................................. 4
    Putting On the Optional Heart Rate Monitor ............................... 4
    Installing the Cadence Sensor .................................................... 5
    Pairing ANT+ Sensors ................................................................ 5
    Setting Your Maximum Heart Rate ............................................. 5
    About Heart Rate Zones ........................................................ 5
    Fitness Goals ......................................................................... 5
    Setting Heart Rate Alerts ............................................................ 5

    Customizing Your Device.............................................. 5
    Setting Up Your User Profile ....................................................... 5
    System Settings .......................................................................... 5
    Time Settings ......................................................................... 6

    Device Information......................................................... 6
    Specifications .............................................................................. 6
    Edge Specifications ............................................................... 6
    Heart Rate Monitor Specifications ......................................... 6
    Speed Sensor and Cadence Sensor Specifications .............. 6
    Device Care ................................................................................ 6
    Cleaning the Device ............................................................... 6
    Caring for the Heart Rate Monitor .......................................... 6
    User Replaceable Batteries ........................................................ 6
    Replacing the Heart Rate Monitor Battery ............................. 6
    Replacing the Speed Sensor or Cadence Sensor Battery ..... 7
    Table of Contents

    i



  • Page 4



  • Page 5

    Introduction
    WARNING
    See the Important Safety and Product Information guide in the
    product box for product warnings and other important
    information.
    Always consult your physician before you begin or modify any
    exercise program.

    3 Place the bike mount on the bike stem.
    4 Attach the bike mount securely using the two bands Á.
    5 Align the tabs on the back of the device with the bike mount
    notches Â.
    6 Press down slightly and turn the device clockwise until it
    locks into place.

    Keys

    Releasing the Edge
    1 Turn the Edge clockwise to unlock the device.
    2 Lift the Edge off the mount.

    Going for a Ride
    À

    Select to turn the backlight on and off.
    Hold to turn the device on and off.

    Á

    Select to start and stop the timer.
    Select to choose an option or to acknowledge a message.

    Â

    Select to scroll through the data screens, options, and settings.
    From the home screen, select to view the device menu.

    Ã

    Select to mark a new lap.
    Select to return to the previous screen.

    Status Icons
    A solid icon means the signal was found or the sensor is
    connected.

    The device comes partially charged. You may need to charge
    the device (Charging the Device, page 1) before going for a
    ride. If your Edge 25 device was packaged with an ANT+
    sensor, they are already paired.
    1 Hold to turn on the device.
    2 From the home screen, select .
    3 Go outside, and wait while the device locates satellites.
    The satellite bars are solid when the device is ready.
    4 Select to start the timer.
    NOTE: History is recorded only while the timer is running.
    5 Select for additional data pages.
    ®

    GPS status
    Bluetooth status
    ®

    Heart rate status
    Speed and cadence status
    LiveTrack status

    Installing the Standard Mount
    For the best GPS reception, position the bike mount so the front
    of the device is oriented toward the sky. You can install the bike
    mount on the stem or the handlebars.
    1 Select a secure location to mount the device where it does
    not interfere with the safe operation of your bike.
    2 Place the rubber disk À on the back of the bike mount.
    The rubber tabs align with the back of the bike mount so it
    stays in place.

    Time À, distance Á, speed Â, total ascent, and calories are
    recorded while the timer is running. When using an optional
    heart rate monitor, your beats per minute and heart rate zone
    appear.
    TIP: You can customize the data fields (Changing Data
    Fields, page 2).
    6 Select to stop the timer.
    7 Select Save.

    Charging the Device
    WARNING
    This device contains a lithium-ion battery. See the Important
    Safety and Product Information guide in the product box for
    product warnings and other important information.
    NOTICE
    To prevent corrosion, thoroughly clean and dry the contacts and
    the surrounding area before charging or connecting to a
    computer. Refer to the cleaning instructions in the appendix.

    1 Plug the USB cable into a USB port on your computer.

    Introduction

    1



  • Page 6

    2 Align the charger posts with the contacts on the back of the
    device, and press the charger À until it clicks.

    3 Charge the device completely.

    Training
    Setting the Ride Mode
    1 Select > Ride Options > Ride Mode.
    2 Select an option:
    • Select Basic to go for an outdoor (Going for a Ride,
    page 1) or indoor ride (Training Indoors, page 2).
    NOTE: This is the default ride mode.
    • Select Follow Course to follow a course downloaded from
    your Garmin Connect™ account (Following a Course from
    the Web, page 4).
    • Select Time to train toward a specific time goal.
    • Select Distance to train toward a specific distance goal.
    • Select Calories to train toward a specific calorie goal.
    3 If necessary, enter a custom value for the time, distance, or
    calorie goal.
    4 Select .
    When you reach the time, distance, or calorie goal, a message
    appears. The device also beeps if audible tones are turned on
    (System Settings, page 5).

    Editing the Time, Distance, or Calorie Goal
    When training toward a time, distance, or calorie goal, you can
    edit the current ride mode to change the goal setting.
    1 Select > Ride Options > Ride Mode > Edit.
    2 Enter a custom value.
    3 Select .

    Changing the Ride Mode
    1 Select > Ride Options > Ride Mode > Change Mode.
    2 Select an option.
    3 If training toward a time, distance, or calorie goal, enter a
    custom value.

    4 If following a course, select a course downloaded from your

    Garmin Connect account.
    5 Select .

    Training Indoors
    You can turn off GPS when you are training indoors or to save
    battery life.
    1 Select > Ride Options > Location > Indoor.
    2 Select .
    The device enters timer mode.
    3 Select to start the timer.
    When GPS is off, speed and distance are not available unless
    you have an optional speed sensor that sends speed and
    distance data to the device (Edge 25 device only). The next time
    you turn on the device, it searches for satellite signals.
    2

    Marking Laps
    You can use the Auto Lap feature to mark a lap at a specific
    distance automatically (for example, every 1 mi. or 5 km), and
    you can mark laps manually. This feature is helpful for
    comparing your performance over different parts of an activity.
    1 Select > Settings > Ride Settings > Laps.
    2 Select an option:
    • Select Auto Lap, and select a distance to use the Auto
    Lap feature.
    • Select Lap Key > Turn On to use
    to mark a lap during
    an activity.
    ®

    Using Auto Pause

    ®

    You can use the Auto Pause feature to pause the timer
    automatically when you stop moving. This feature is helpful if
    your activity includes stop lights or other places where you need
    to stop.
    NOTE: The paused time is not saved with your history data.
    Select > Settings > Ride Settings > Auto Pause > Turn
    On.

    Using Auto Scroll
    You can use the Auto Scroll feature to cycle through the training
    data pages automatically while the timer is running.
    1 Select > Settings > Ride Settings > Auto Scroll.
    2 Select a display speed.

    Changing Data Fields
    You can change the data field combinations for the pages that
    appear while the timer is running.
    1 Select > Settings > Ride Settings > Data Fields.
    2 Select a page.
    3 Select a data field to change it.

    History
    History includes time, distance, calories, speed, lap data,
    elevation, and optional ANT+ sensor information.
    NOTE: History is not recorded while the timer is stopped or
    paused.
    When the device memory is full, your oldest data is overwritten.
    You should upload your history to Garmin Connect periodically
    to keep track of all your ride data.

    Viewing Your Ride
    1 Select > History > Rides.
    2 Select a ride.
    Deleting a Ride
    1 Select > History > Rides.
    2 Select a ride.
    3 Select > Discard > Yes.

    Personal Records
    When you complete a ride, the device displays any new
    personal records you achieved during that ride. Personal
    records include your fastest time over a standard distance,
    longest ride, and most ascent gained during a ride.

    Viewing Your Personal Records
    1 Select > History > Records.
    2 Select to scroll through your records.

    Training



  • Page 7

    Deleting Personal Records
    1 Select > History > Records.
    2 Select a record to delete.
    3 Select Clear? > Yes.
    Restoring a Personal Record
    You can set each personal record back to the one previously
    recorded.
    1 Select > History > Records.
    2 Select a record to restore.
    3 Select Use Previous > Use Record.

    Viewing Bike Totals
    You can view the accumulated data you have saved to the Edge
    device, including the number of rides, time, and distance.
    1 Select > History > Totals.
    2 Select an option to view trip or device totals.

    Data Management
    NOTE: The device is not compatible with Windows 95, 98, Me,
    Windows NT , and Mac OS 10.3 and earlier.
    ®

    ®

    ®

    Deleting Files
    NOTICE
    If you do not know the purpose of a file, do not delete it. Your
    device memory contains important system files that should not
    be deleted.

    1
    2
    3
    4

    Open the Garmin drive or volume.
    If necessary, open a folder or volume.
    Select a file.
    Press the Delete key on your keyboard.

    Disconnecting the USB Cable

    TIP: You can reset trip totals and retain device totals to
    record a new trip log.
    3 Select Yes.
    NOTE: This does not delete any saved activities.

    If your device is connected to your computer as a removable
    drive or volume, you must safely disconnect your device from
    your computer to avoid data loss. If your device is connected to
    your Windows computer as a portable device, it is not necessary
    to safely disconnect.
    1 Complete an action:
    • For Windows computers, select the Safely Remove
    Hardware icon in the system tray, and select your device.
    • For Mac computers, drag the volume icon to the trash.
    2 Disconnect the cable from your computer.

    Garmin Connect

    Bluetooth Connected Features

    You can connect with your friends on Garmin Connect. Garmin
    Connect gives you the tools to track, analyze, share, and
    encourage each other. Record the events of your active lifestyle
    including runs, walks, rides, swims, hikes, triathlons, and more.
    To sign up for a free account, go to www.garminconnect.com
    /start.
    Store your activities: After you complete and save an activity
    with your device, you can upload that activity to Garmin
    Connect and keep it as long as you want.
    Analyze your data: You can view more detailed information
    about your activity, including time, distance, elevation, heart
    rate, calories burned, cadence, an overhead map view, pace
    and speed charts, and customizable reports.
    NOTE: Some data requires an optional accessory such as a
    heart rate monitor.

    The Edge 25 device has several Bluetooth connected features
    for your compatible smartphone or mobile device using the
    Garmin Connect Mobile app. For more information, go to
    www.garmin.com/intosports/apps.
    LiveTrack: Allows friends and family to follow your races and
    training activities in real time. You can invite followers using
    email or social media, allowing them to view your live data on
    a Garmin Connect tracking page.
    Activity uploads: Automatically sends your activity to Garmin
    Connect Mobile as soon as you finish recording the activity.
    Social media interactions: Allows you to post an update to
    your favorite social media website when you upload an
    activity to Garmin Connect Mobile.
    Notifications: Displays call and text alerts on your Edge 25
    device.

    Resetting Bike Totals
    1 Select > History > Totals > Reset.
    2 Select an option to reset device or trip totals.

    Pairing Your Smartphone with Your Edge 25
    1 Go to www.garmin.com/intosports/apps, and download the
    Garmin Connect Mobile app to your smartphone.

    2 Bring your smartphone within 10 m (33 ft.) of your device.
    3 From the Edge 25 device, select > Settings > Bluetooth >
    Pair Smartphone.

    4 Open the Garmin Connect Mobile app, and follow the on-

    screen instructions to connect a device.
    The instructions are provided during the initial setup, or can
    be found in the Garmin Connect Mobile app help.

    Share your activities: You can connect with friends to follow
    each other's activities or post links to your activities on your
    favorite social networking sites.

    Using Garmin Connect
    You can upload all of your activity data to Garmin Connect for
    comprehensive analysis. With Garmin Connect, you can view a
    map of your activity, and share your activities with friends.
    1 Connect the device to your computer using the USB cable.
    2 Go to www.garminconnect.com/start.
    3 Follow the on-screen instructions.
    History

    Turning Off Bluetooth Technology
    • From the Edge 25 device, select > Settings > Bluetooth >
    Turn Off.
    • See the owner's manual for your smartphone to turn off
    Bluetooth wireless technology.

    Turning Off Smart Notifications
    From the Edge 25 device, select > Settings > Bluetooth >
    Smart Notifications > Turn Off.

    3



  • Page 8

    Navigation

    Map Features

    Courses
    You can send a course from your Garmin Connect account to
    your device. After it is saved to your device, you can navigate
    the course on your device.
    You can follow a saved course simply because it is a good
    route. For example, you can save and follow a bike friendly
    commute to work. You can also follow a saved course, trying to
    match or exceed previously set performance goals.

    Following a Course from the Web
    Before you can download a course from your Garmin Connect
    account, you must have a Garmin Connect account (Using
    Garmin Connect, page 3).
    1 Connect the device to your computer using the USB cable.
    2 Go to www.garminconnect.com.
    3 Create a new course, or select an existing course.
    4 Select Send to Device.
    5 Disconnect the device.
    6 Select > Courses.
    7 Select a course.
    8 Select Do Course.
    9 Select to start the timer.
    The map displays the course and a progress bar at the top of
    the screen.
    10 If necessary, select for additional data pages.

    À
    Á
    Â

    Points to north
    Course outline
    Zoom level

    Deleting a Course
    1 Select > Courses.
    2 Select a course.
    3 Select Delete > Yes.
    Course Options
    Select > Settings > Course Options.
    Turn Prompts: Enables or disables turn-by-turn navigation
    prompts.
    Segment Prompts: Enables or disables prompts alerting you to
    approaching segments.

    ANT+ Sensors
    The Edge 25 device can be used with wireless ANT+ sensors.
    For more information about compatibility and purchasing
    optional sensors, go to http://buy.garmin.com.

    Putting On the Optional Heart Rate Monitor

    You can view the distance to the end of the course À, and
    your time ahead or behind the course time Á.

    Racing Against a Segment
    You can download courses containing segments from your
    Garmin Connect account. Segments are virtual race courses.
    You can race against a segment, and compare your
    performance to past activities, connections in your Garmin
    Connect account, or other members of the Garmin Connect
    community. You can upload your activity data to your Garmin
    Connect account to view your segment position.
    1 Start following a course containing a segment (Following a
    Course from the Web, page 4).
    When you are near the starting point of a segment, a
    message appears.
    Start
    racing against the segment.
    2
    The device displays the time spent in the segment.
    A message appears when the segment is complete.

    NOTICE
    The heart rate monitor may cause chafing when used for long
    periods of time. To alleviate this issue, apply an anti-friction
    lubricant or gel to the center of the module where it contacts
    your skin. Do not apply anti-friction gel or lubricant on the
    electrodes. Do not use gels or lubricants that contain sunscreen.
    You should wear the heart rate monitor directly on your skin, just
    below your sternum. It should be snug enough to stay in place
    during your activity.
    1 Push one tab À of the strap through the slot Á in the heart
    rate monitor module.

    2 Press the tab down.
    3 Wet the electrodes  on the back of the module to create a
    strong connection between your chest and the heart rate
    monitor module.

    Viewing Course Details
    1 Select > Courses.
    2 Select a course.
    3 Select an option:
    • Select Details to view the time, distance, and total ascent
    of the course.
    • Select Map to view the course on the map.

    4

    4 Wrap the strap around your chest and attach it to the other
    side of the heart rate monitor module.

    Navigation



  • Page 9

    1 Select > Settings > User Profile > Max. HR.
    2 Enter your maximum heart rate.
    About Heart Rate Zones
    Many athletes use heart rate zones to measure and increase
    their cardiovascular strength and improve their level of fitness. A
    heart rate zone is a set range of heartbeats per minute. The five
    commonly accepted heart rate zones are numbered from 1 to 5
    according to increasing intensity. Generally, heart rate zones are
    calculated based on percentages of your maximum heart rate.
    The Garmin logo should be right-side up.
    5 Bring the device within 3 m (10 ft.) of the heart rate monitor.
    After you put on the heart rate monitor, it is active and sending
    data.
    ®

    Installing the Cadence Sensor
    NOTE: If you do not have this sensor, you can skip this task.
    TIP: Garmin recommends you secure your bike on a stand while
    installing the sensor.
    1 Select the band size that fits your crank arm À securely.
    The band you select should be the smallest one that
    stretches across the crank arm.
    2 On the non-drive side, place and hold the flat side of the
    cadence sensor on the inside of the crank arm.
    3 Pull the bands Á around the crank arm, and attach them to
    the hooks  on the sensor.

    Fitness Goals
    Knowing your heart rate zones can help you measure and
    improve your fitness by understanding and applying these
    principles.
    • Your heart rate is a good measure of exercise intensity.
    • Training in certain heart rate zones can help you improve
    cardiovascular capacity and strength.
    • Knowing your heart rate zones can prevent you from
    overtraining and can decrease your risk of injury.
    If you know your maximum heart rate, you can use the table
    (Heart Rate Zone Calculations, page 8) to determine the best
    heart rate zone for your fitness objectives.
    If you do not know your maximum heart rate, use one of the
    calculators available on the Internet. Some gyms and health
    centers can provide a test that measures maximum heart rate.
    The default maximum heart rate is 220 minus your age.

    Setting Heart Rate Alerts

    4 Rotate the crank arm to check for clearance.
    The sensor and bands should not contact any part of your
    bike or shoe.
    NOTE: The LED flashes green for five seconds to indicate
    activity after two revolutions.
    5 Take a 15 minute test ride and inspect the sensor and bands
    to ensure there is no evidence of damage.

    Pairing ANT+ Sensors
    The first time you connect an ANT+ sensor to your device, you
    must pair the device and sensor. After the initial pairing, the
    device automatically connects to the sensor when you start your
    activity and the sensor is active and within range.
    NOTE: If your Edge 25 device was packaged with an ANT+
    sensor, they are already paired.
    1 Install the sensor or put on the heart rate monitor.
    2 Select > Settings > Connect Sensors.
    3 Bring the device within 1 cm of the sensor, and wait while the
    device connects to the sensor.
    When the device detects the sensor, a message appears.

    Setting Your Maximum Heart Rate
    The device uses your user profile information from the initial
    setup to estimate your maximum heart rate and determine your
    default heart rate zones. For the most accurate calorie data
    during your activity, you should set your maximum heart rate (if
    known).
    Customizing Your Device

    If you have an optional heart rate monitor, you can set the
    device to alert you when your heart rate is above or below a
    target zone or a custom range. For example, you can set the
    device to alert you when your heart rate is below 150 beats per
    minute (bpm).
    1 Select > Ride Options > HR Alert.
    2 Select an option:
    • To use the range of an existing heart rate zone, select a
    heart rate zone.
    • To customize the maximum value, select Custom > High
    > Turn On, and enter a value.
    • To customize the minimum value, select Custom > Low >
    Turn On, and enter a value.
    Each time you exceed or drop below the specified range or
    custom value, a message appears. The device also beeps if
    audible tones are turned on (System Settings, page 5).

    Customizing Your Device
    Setting Up Your User Profile
    You can update your gender, birth year, height, weight, and
    maximum heart rate (Setting Your Maximum Heart Rate,
    page 5) settings. The device uses this information to calculate
    accurate training data.
    1 Select > Settings > User Profile.
    2 Select an option.

    System Settings
    Select > Settings > System.
    Language: Sets the language displayed on the device.
    Time: Sets the time settings (Time Settings, page 6).
    Tones: Turns audible tones on or off. You can set tones for keys
    and alert messages.
    Units: Sets the units of measure used on the device.

    5



  • Page 10

    GLONASS: Turns GLONASS on or off. By default, the device
    uses GPS to locate satellites. For increased performance in
    challenging environments and faster GPS position location,
    you can enable GPS and GLONASS. Using GPS and
    GLONASS reduces battery life more quickly than using only
    GPS.
    Software Update: Allows you to check for software updates.
    About: Displays the software version and unit ID.

    Time Settings
    Select > Settings > System > Time.
    Time Format: Sets the device to show time in a 12-hour or a
    24-hour format.
    Set Time: Allows you to set the time manually or automatically
    based on your GPS position.

    Device Information

    Avoid pressing the keys under water.
    Do not use a sharp object to clean the device.
    Avoid chemical cleaners, solvents, and insect repellents that can
    damage plastic components and finishes.
    Thoroughly rinse the device with fresh water after exposure to
    chlorine, salt water, sunscreen, cosmetics, alcohol, or other
    harsh chemicals. Prolonged exposure to these substances can
    damage the case.
    Do not store the device where prolonged exposure to extreme
    temperatures can occur, because it can cause permanent
    damage.

    Cleaning the Device
    1 Wipe the device using a cloth dampened with a mild
    detergent solution.

    2 Wipe it dry.
    Caring for the Heart Rate Monitor
    NOTICE
    A build up of sweat and salt on the strap can decrease the ability
    of the heart rate monitor to report accurate data.

    Specifications
    Edge Specifications
    Battery type

    Rechargeable, built-in lithium-ion battery

    Battery life

    Up to 8 hr.

    Operating
    temperature range

    From -15º to 60ºC (from 5º to 140ºF)

    Charging temperature From 0º to 45ºC (from 32º to 113ºF)
    range
    Radio frequency/
    protocol

    2.4 GHz ANT+ wireless communications
    protocol (Edge 25 device only)
    Bluetooth Smart wireless technology (Edge 25
    device only)

    Water rating

    IEC 60529 IPX7*

    *The device withstands incidental exposure to water of up to 1 m
    for up to 30 min. For more information, go to www.garmin.com
    /waterrating.

    Heart Rate Monitor Specifications
    Battery type

    User-replaceable CR2032, 3 volts

    Battery life

    Approximately 3 years (1 hour per day)

    Operating temperature From -10° to 50°C (from 14° to 122°F)
    range
    Radio frequency/
    protocol

    2.4 GHz ANT+ wireless communications
    protocol

    Water rating

    1 ATM*
    NOTE: This product does not transmit heart
    rate data while swimming.

    • Rinse the strap after every use.
    • Hand wash the strap occasionally, using a tiny amount of
    mild detergent, such as dishwashing liquid.
    NOTE: Using too much detergent may damage the strap.
    • Do not put the strap in a dryer.
    • When drying the strap, hang it up or lay it flat.

    User Replaceable Batteries
    WARNING
    Do not use a sharp object to remove batteries.
    Keep the battery away from children.
    Never put batteries in mouth. If swallowed, contact your
    physician or local poison control center.
    Replaceable coin cell batteries may contain perchlorate
    material. Special handling may apply. See www.dtsc.ca.gov
    /hazardouswaste/perchlorate.
    CAUTION
    Contact your local waste disposal department to properly
    recycle the batteries.

    Replacing the Heart Rate Monitor Battery
    1 Locate the circular battery cover on the back of the heart rate
    monitor.

    *The device withstands pressure equivalent to a depth of 10 m.
    For more information, go to www.garmin.com/waterrating.

    Speed Sensor and Cadence Sensor Specifications
    Battery type

    User-replaceable CR2032, 3 volts

    Battery life

    Approximately 12 months (1 hour per day)

    Operating temperature
    range

    From -20º to 60ºC (from -4º to 140ºF)

    Radio frequency/protocol

    2.4 GHz ANT+ wireless communications
    protocol

    Water rating

    1 ATM*

    *The device withstands pressure equivalent to a depth of 10 m.
    For more information, go to www.garmin.com/waterrating.

    Device Care
    NOTICE
    Avoid extreme shock and harsh treatment, because it can
    degrade the life of the product.
    6

    2 Use a coin to twist the cover counter-clockwise until it is
    loose enough to remove (the arrow points to OPEN).

    3 Remove the cover and the battery.
    4 Wait 30 seconds.
    5 Insert the new battery with the positive side facing up.
    NOTE: Do not damage or lose the O-ring gasket.
    6 Use a coin to twist the cover clockwise back into place (the
    arrow points to CLOSE).
    After you replace the heart rate monitor battery, you may need
    to pair the heart rate monitor with the device again.
    Device Information



  • Page 11

    Replacing the Speed Sensor or Cadence Sensor
    Battery
    The LED flashes red to indicate a low battery level after two
    revolutions.
    1 Locate the circular battery cover À on the back of the sensor.

    Getting More Information
    • Go to www.garmin.com/intosports.
    • Go to www.garmin.com/learningcenter.
    • Go to http://buy.garmin.com, or contact your Garmin dealer
    for information about optional accessories and replacement
    parts.

    Maximizing Battery Life
    • Turn off the Bluetooth wireless feature on your Edge 25
    device (Turning Off Bluetooth Technology, page 3).
    • Turn off GLONASS (System Settings, page 5).

    2 Twist the cover counter-clockwise until the marker points to
    unlocked and the cover is loose enough to remove.
    Remove
    the cover and the battery Á.
    3
    TIP: You can use a piece of tape  or a magnet to remove
    the battery from the cover.

    Acquiring Satellite Signals
    The device may need a clear view of the sky to acquire satellite
    signals. The time and date are set automatically based on the
    GPS position.
    1 Go outdoors to an open area.
    The front of the device should be oriented toward the sky.
    Wait
    while the device locates satellites.
    2
    It may take 30–60 seconds to locate satellite signals.

    Resetting the Device

    4 Wait 30 seconds.
    5 Insert the new battery into the cover, observing polarity.
    NOTE: Do not damage or lose the O-ring gasket.

    6 Twist the cover clockwise until the marker points to locked.
    NOTE: The LED flashes red and green for a few seconds
    after battery replacement. When the LED flashes green and
    then stops flashing, the device is active and ready to send
    data.

    Troubleshooting

    If the device stops responding, you may need to reset it.
    NOTE: Resetting the device may erase your data or settings.
    1 Hold for 15 seconds.
    The device turns off.
    2 Hold for one second to turn on the device.

    Replacement O-rings
    Replacement bands (O-rings) are available for the standard
    mount in two sizes:
    • 1.3 × 1.5 × 0.9 in. AS568-125
    • 1.7 × 1.9 × 0.9 in. AS568-131
    NOTE: Use Ethylene Propylene Diene Monomer (EPDM)
    replacement bands only. Go to http://buy.garmin.com, or contact
    your Garmin dealer.

    Updating the Software

    Viewing Device Information

    Before you can update your device software, you must have a
    Garmin Connect account, and you must download the Garmin
    Express™ application.
    1 Connect the device to your computer using the USB cable.
    When new software is available, the Garmin Express
    application sends it to your device.
    2 Follow the on-screen instructions.
    3 Do not disconnect your device from the computer while the
    Garmin Express application downloads the software.
    TIP: If you are having trouble updating the software with the
    Garmin Express application, you may need to upload your
    activity history to the Garmin Connect application and delete
    your activity history from the device. This should provide
    sufficient memory space for the update.

    You can view the unit ID, software version, GPS version, and
    software information.
    Select > Settings > System > About.

    Support and Updates
    Garmin Express provides easy access to these services for
    Garmin devices.
    • Product registration
    • Product manuals
    • Software updates
    • Data uploads to Garmin Connect

    Troubleshooting

    Appendix
    Data fields
    Some data fields require ANT+ accessories to display data
    (Edge 25 device only).
    Avg. Speed: The average speed for the current activity.
    BPM: Your heart rate in beats per minute (bpm). Your device
    must be connected to a compatible heart rate monitor.
    Cadence: Cycling. The number of revolutions of the crank arm.
    Your device must be connected to a cadence accessory for
    this data to appear.
    Calories: The amount of total calories burned.
    Distance: The distance traveled for the current track or activity.
    HR Zone: The current range of your heart rate (1 to 5). The
    default zones are based on your user profile and maximum
    heart rate (220 minus your age).
    Speed: The current rate of travel.
    Time: The stopwatch time for the current activity.

    7



  • Page 12

    Total Ascent: The total elevation distance ascended since the
    last reset.

    Heart Rate Zone Calculations
    Zone % of
    Maximum
    Heart Rate

    Perceived Exertion

    Benefits

    1

    50–60%

    Relaxed, easy pace,
    rhythmic breathing

    Beginning-level
    aerobic training,
    reduces stress

    2

    60–70%

    Comfortable pace,
    slightly deeper
    breathing, conversation
    possible

    Basic cardiovascular
    training, good
    recovery pace

    3

    70–80%

    Moderate pace, more
    difficult to hold
    conversation

    Improved aerobic
    capacity, optimal
    cardiovascular training

    4

    80–90%

    Fast pace and a bit
    Improved anaerobic
    uncomfortable, breathing capacity and
    forceful
    threshold, improved
    speed

    5

    90–100%

    Sprinting pace,
    unsustainable for long
    period of time, labored
    breathing

    Anaerobic and
    muscular endurance,
    increased power

    Software License Agreement
    BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE
    TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE
    LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT
    CAREFULLY.
    Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited
    license to use the software embedded in this device (the
    “Software”) in binary executable form in the normal operation of
    the product. Title, ownership rights, and intellectual property
    rights in and to the Software remain in Garmin and/or its thirdparty providers.
    You acknowledge that the Software is the property of Garmin
    and/or its third-party providers and is protected under the United
    States of America copyright laws and international copyright
    treaties. You further acknowledge that the structure,
    organization, and code of the Software, for which source code is
    not provided, are valuable trade secrets of Garmin and/or its
    third-party providers and that the Software in source code form
    remains a valuable trade secret of Garmin and/or its third-party
    providers. You agree not to decompile, disassemble, modify,
    reverse assemble, reverse engineer, or reduce to human
    readable form the Software or any part thereof or create any
    derivative works based on the Software. You agree not to export
    or re-export the Software to any country in violation of the export
    control laws of the United States of America or the export control
    laws of any other applicable country.

    8

    Appendix



  • Page 13

    Index
    A
    accessories 4, 7
    alerts 5
    ANT+ sensors 4
    applications 3
    smartphone 3
    Auto Lap 2
    Auto Pause 2
    Auto Scroll 2

    B
    backlight 1
    bands 7
    battery
    charging 1
    maximizing 3, 5, 7
    replacing 6, 7
    Bluetooth technology 1, 3

    C
    charging 1
    cleaning the device 6
    clock 6
    courses 4
    deleting 4
    loading 4

    D
    data
    storing 3
    transferring 3
    data fields 2, 7
    deleting
    all user data 3
    history 3
    personal records 3

    G
    Garmin Connect 3, 4
    storing data 3
    Garmin Express
    registering the device 7
    updating software 7
    GPS 1
    signal 7
    stopping 2

    H

    P
    pairing
    ANT+ sensors 5
    smartphone 3
    personal records 2
    deleting 3
    restoring 3
    product registration 7
    profiles, user 5

    R
    registering the device 7
    replacing the battery 6
    resetting the device 7

    S
    satellite signals 7
    saving activities 1
    segments 4
    settings 5, 6
    smartphone 3
    applications 3
    pairing 3
    software
    updating 7
    version 7
    software license agreement 8
    specifications 6
    speed and cadence sensors 1, 5, 7
    storing data 3
    system settings 5

    T
    time, settings 6
    timer 1, 2
    training 3
    modes 2
    pages 1
    troubleshooting 7

    U
    unit ID 7
    updates, software 7
    USB 7
    disconnecting 3
    user data, deleting 3
    user profile 5

    Z
    zones, heart rate 5

    heart rate 1
    alerts 5
    monitor 4–6
    zones 5, 8
    history 1–3
    deleting 2, 3
    sending to computer 3

    I
    icons 1
    installing 1, 5

    K
    keys 1, 6

    L
    laps 1, 2

    M
    maps 4
    updating 7
    menu 1
    mounting the device 1

    N
    navigation 4

    O
    O-rings. See bands

    Index

    9



  • Page 14

    www.garmin.com/support
    +43 (0) 820 220230

    + 32 2 672 52 54

    0800 770 4960

    1-866-429-9296

    +385 1 5508 272
    +385 1 5508 271

    +420 221 985466
    +420 221 985465

    + 45 4810 5050

    + 358 9 6937 9758

    + 331 55 69 33 99

    + 39 02 36 699699

    (+52) 001-855-792-7671

    0800 0233937

    +47 815 69 555

    00800 4412 454
    +44 2380 662 915

    (+35) 1214 447 460

    +386 4 27 92 500

    0861 GARMIN (427 646)
    +27 (0)11 251 9999

    +34 93 275 44 97

    + 46 7744 52020

    +886 2 2642-9199 ext 2

    0808 238 0000
    +44 (0) 870 8501242

    +49 (0) 89 858364880
    zum Ortstarif - Mobilfunk
    kann abweichen

    913-397-8200
    1-800-800-1020

    TRA

    REGISTERED No:
    ER39140/15
    DEALER No:
    DA0015955/08
    © 2015 Garmin Ltd. or its subsidiaries






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Garmin Edge 20 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Garmin Edge 20 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 1,65 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Garmin Edge 20

Garmin Edge 20 Bedienungsanleitung - Deutsch - 16 seiten

Garmin Edge 20 Bedienungsanleitung - Holländisch - 16 seiten

Garmin Edge 20 Bedienungsanleitung - Französisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info