Bedienungsanleitung Garmin Vivohub (Seite 4 von 4) (Englisch)

589582

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

sync range of compatible activity trackers is affected by the

user's body.

TIP: For best results, you should install the devices where user

traffic passes within 5 m (16 ft.) of the devices from multiple

directions. For example, install devices at a T intersection where

users approach from three directions.

Sync Times

Sync times vary based on the distance of the user from the

device, and on the amount of time that has passed since the

user last synced with the device.

NOTE: Sync times depend on the type of activity tracker. The

average sync times listed below are for the vívokí

™

device.

Time Since Last Sync Average Sync Time

1 day 3 seconds

3 days 5 seconds

14 days 10 seconds

28 days 20 seconds

Troubleshooting

Resetting the Device

Remove the micro-USB connector from the device.

The device turns off.

Reconnect the micro-USB connector to the device.

The device turns on automatically.

Using the Status LEDs for Troubleshooting

The status LEDs can help when troubleshooting problems.

LED State Possible Problem

Green Off The device does not have power.

Red Fast

blink

The device cannot locate the configured wireless

network.

The device has the wrong SSID or password for the

configured wireless network.

The device cannot complete the DHCP process (if

configured).

Solid The device is initializing.

The device cannot access the Internet through the

configured wireless network. Confirm that the

appropriate exceptions have been made (How does the

device communicate and what can be done to ensure

connectivity?).

The device OAuth credentials are invalid.

NOTE: If you did not receive the device from Garmin,

contact your wellness partner to ensure the device was

not previously registered using different OAuth

credentials. A vívohub device can only be registered to

one set of OAuth credentials at a time.

TIP: Ensure you are using the latest firmware. Contact

Garmin or your wellness partner for the latest firmware

version.

NOTE: The red LED sequence is a fast blink, followed by the

solid state, followed by the off state. In this sequence, the solid

red LED indicates that the device connected successfully to the

wireless network and that DHCP passed (if configured).

Garmin

, the Garmin logo, and ANT

are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Connect

™

, vívohub

™

, and vívokí

™

are trademarks of Garmin Ltd. or its

subsidiaries. These trademarks may not be used without the express permission of Garmin.

Wi‑Fi

is a registered mark of Wi-Fi Alliance Corporation. Windows

is a registered trademark of Microsoft Corporation in the United States and other countries. Other trademarks and trade names are those of

their respective owners.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Garmin Vivohub Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Garmin Vivohub

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info