621171
17
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
13
GB
not use a power tool while you are tired or under
the inuence ofdrugs, alcohol or medication.
A moment of inattention while operating power
toolsmay result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protectiveequipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protectionused for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the o-position beforeconnecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
nger on the switch or energising power tools that
havethe switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrenchor a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables bettercontrol of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothingand gloves
away from moving parts. Loose clothes, jewellery
or long hair can becaught in moving parts.
g) If devices are provided for the connection of dust
extraction and collectionfacilities, ensure these
are connected and properly used. Use of dust
collection canreduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct po
-
wer tool for your application. Thecorrect power
tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and o. Any power toolthat cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source and/
or the battery pack from thepower tool before
making any adjustments, changing accessories,
or storingpower tools. Such preventive safety
measures reduce the risk of starting the powertool
accidentally.
d) Store idle power tools out of the reach of child
-
ren and do not allow personsunfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts,breakage of parts and
any other condition that may aect the power
tool’soperation. If damaged, have the power tool
repaired before use. Many accidentsare caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharpcutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with theseinstructions, taking into
account the working conditions and the work to
beperformed. Use of the power tool for opera
-
tions dierent from those intended couldresult in
a hazardous situation.
5) Service
a) Have your power tool serviced by a qualied
repair person using only identicalreplacement
parts. This will ensure that the safety of the power
tool is maintained.
Additional safety instructions
Hedge trimmer
Keep parts of your body o the cutting blade. Do
not remove jammed material while the blades are
moving.
When removing jammed material, make sure the
appliance is o.
Attach the knife protection for transport or
storage. Before you start with the work, search the
thicket for hidden objects such as wire fences, etc.
Do not let children, other persons or pets near
the cutting scissors.
Do not use the cutting scissors if the cutting tool is
not tted properly or when it is damaged.
Before adjusting the cutting scissors, make sure the
knives or blades do not touch stones or debris.
Do not cut any hard objects. This could lead to
accidents and damage the cutting scissors.
Avoid abnormal posture and do not work above
shoulder height.
Respect the system voltage!
Do not attempt to remove shavings when the
knives are moving. When removing any jammed
material, make sure the cutting scissors are o
and stopped. When lifting or holding the cutting
scissors, do not hold the cutting knives.
CAUTION: Knives are still running for a short time
after being switched o.
Putting into operation for your
safety
Before carrying out any work on the machine,
disconnect the plug from the socket.
Bei unbeabsichtigtem Betätigen des Ein-/Ausschalters
besteht Verletzungsgefahr.
ENGLISH
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gartenmeister Elektro-Heckenschere GM 7160 861579 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info