580061
18
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
18
Gigaset A590 / SEA / A31008-M2045-Y701-2-7619 / main.fm / 26.05.2010
Changing the handset name
You can change the default name of the handset
(default: Gigaset). Maximum characters: 10.
f¢PERSONAL SET ¢|
¢HANDSET NAME¢|
The current name is shown, last character flashing.
¤ Use { as backspace.
~
(enter name) ¢|
You will find information on multiple line input in the
appendix to this user guide,
¢ page 20.
Changing the ringer volume
You can choose between 5 sound levels for the ringer
volume;
LEVEL 1LEVEL 4 and RINGER OFF.
f¢PERSONAL SET ¢|
¢HANDSET TONE¢|
¢RING VOLUME¢|
The currently set ringer melody is played with current
volume.
¢p (select volume level) ¢|
If the ringer is deactivated, the Ú icon appears in the
display. The handset will ring at
LEVEL 2 when its base
is paging it.
You can also deactivate the ringer completely using
the
* key.
Changing the ringer melody
You can choose between 10 ringer melodies.
f¢PERSONAL SET ¢|
¢HANDSET TONE¢|
¢RING TONES¢|
¢p (select melody)
The selected melody is played.
¤ To confirm a selected melody¢|
Setting the key beep
Your telephone will beep whenever a key on the
handset is pressed. You can deactivate this acoustical
signal (default:
ON).
f¢PERSONAL SET ¢|¢HANDSET
TONE¢|
¢KEY BEEP¢|
¢p (select ON or OFF) ¢|
Activating/deactivating auto answer
If you activate this function, when you receive a call
you can simply lift the handset out of the charging
cradle without having to press the talk key
c.
f¢PERSONAL SET ¢|¢AUTO ANSWER
¢|
¢p (select ON or OFF) ¢|
Setting date and time
f¢CLOCK/ALARM ¢|
¢ DATE & TIME¢|
¢
~
(enter date: DD/MM) ¢|
¢
~
(enter time: HH:MM, 24hrs format) ¢|
¤ Use { as backspace.
Setting the alarm clock
You can set an alarm clock on the handset.
Precondition: The date and time have already been
set, see above.
An alarm will sound for 1 minute at the set time once
or daily.
f¢CLOCK/ALARM ¢|¢ALARM¢|
¢p (select ON ONCE or ON DAILY or OFF) ¢|
If you select ON ONCE or ON DAILY
~
(enter time: HH:MM, 24hr format) ¢|
¤ Use { as backspace.
If the alarm is activated, the ¼ icon appears in the dis-
play. During the alarm --ALARM-- is flashing on the
display.
¤ To cut off the alarm press any key on the keypad.
Setting the alarm melody
You can choose from 3 alarm melodies (default:
MELODY 1).
f¢CLOCK/ALARM ¢|
¢ALARM TONE¢|
¢p (select melody)
The selected melody is played.
¤ To confirm a selected melody¢|
Settings (base)
Setting date and time
Ì press and hold.
The display shows the date and time fields. The next
position to be filled in will flash.
~ (enter time (HH:MM) and date (DD/MM))
¤ To correct your input backspace withÔ.
¤ Press Ì to save the new clock settings.
Please note
Once the date and time are set, if there is a power
cut of the mains, you should reset date and time.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset A590 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info