580061
19
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
19
Gigaset A590 / SEA / A31008-M2045-Y701-2-7619 / main.fm / 26.05.2010
Changing the ringer volume
There are 4 levels of ringer volume (default: L2). You
can adjust the ringer volume.
Precondition: Base station is in idle mode.
¤ Press [ / \.
The current setting is shown on the display.
¤ To switch the ringer off completely (L0) press and
hold the
* key.
When switching the ringer off the key beep is also
deactivated.
Changing the PIN
The base station is protected via PIN against unau-
thorised handset registration. You can change the
preset PIN via menu.
f¢ADVANCED SET ¢|¢CHANGE PIN¢|
¢
~
(enter current PIN, default: 0000) ¢|
¢
~
(enter new PIN: 0 to 9 digits) ¢|
¤ Use { as backspace.
Restoring to the factory settings
You can reset any individual settings and changes
that you have made.
Phone book and calls list entries are not affected.
After restoring the base, handsets are not affected.
Precondition: handset and base are in idle mode.
Restoring the base
f¢ADVANCED SET ¢| ¢RESET¢|
¢p (select BASE) ¢|¢|
Restoring the handset
f¢ADVANCED SET ¢|¢RESET¢|
¢p (select HANDSET) ¢|¢|
Connecting to PABX
Your phone is preset at the factory for operation on
the main connection. For operation on a PABX, you
may have to change the following values. Please refer
to the user guide for your PABX.
¤ To change the handset settings use the menu.
f ¢ ADVANCED SET
Prefix setup
You can set a prefix which is automatically added to a
phone number with at least 5 digits. This prefix can be
used to dial into the outside line when operating the
device on a PABX.
Precondition: The number must be dialled in idle
mode, i.e. first
~
then ª.
f¢ADVANCED SET ¢|
¢AUTO PREFIX¢|
¢p(select ON or OFF) ¢|
~
(enter prefix, max. 5 digits) ¢|
¤ To enter a pause in the prefix press and hold Z.
Pause duration is one second by default.
Example: Prefix is ON and set to 65
Setting flash time
You can set the flash time to 100 (SHORT), 300
(
MEDIUM) or 600 (LONG) ms. (Default: SHORT)
¢f¢ADVANCED SET ¢|
¢FLASH TIME ¢|
¢p(select SHORT, MEDIUM or LONG) ¢|
Changing the dialling mode
You can set the dialling mode to PULSE or TONE.
(Default:
TONE)
f¢ADVANCED SET ¢|
¢DIAL MODE ¢|
¢p(select PULSE or TONE) ¢|
Please note
¤ If you have forgotten the PIN reset the base
unit to the factory settings to reset the PIN to
default setting 0000,
¢ page 19.
AUTO PREFIX
Set a prefix for dialling outside line.
FLASH TIME
Change the flash time.
DIAL MODE
Change the dial mode.
You dial Really dialled number
1234 1234
12345 65P12345
#12345 65P#12345
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset A590 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info