Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
1
BabyMonitor
PV830 VIDEO
GIGASET. INSPIRING CONVERSATION.*
*GIGASET. POUR DES CONVERSATIONS INSPIRÉES.
en
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    BabyMonitor
    PV830 VIDEO

    en

    GIGASET. INSPIRING CONVERSATION.*
    *GIGASET. POUR DES CONVERSATIONS INSPIRÉES.

    1



  • Page 2

    Content
    Feature highlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
    Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
    General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
    Information regarding this user guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
    Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
    Proper use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
    Operating elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
    Baby unit (BU) components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
    Parent unit (PU) components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
    Initial use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Package content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Installing batteries in the baby unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Connecting the baby unit to the AC mains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Installing the rechargeable batteries in the parent unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Connecting the parent unit to the AC mains. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
    Installing the PV830. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Baby unit components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Parent unit components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Operation and use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Switching the baby unit and parent unit on and off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Checking the connection between the parent unit and the baby unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Out of range indication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
    Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Setting the volume of the parent unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Setting the display brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Mirror the image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Temperature indication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Setting the clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
    Night light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
    Lullabys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
    Feeding/medicine alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
    Vibrator function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
    Voice activated transmission (VOX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
    Night vision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
    Cleaning and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
    Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
    Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
    Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
    Problem causes and solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
    Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
    Storage and disposal instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
    Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
    Waste disposal of package materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
    Waste disposal (environmental protection). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
    Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
    Customer Service & Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
    Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
    Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
    Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
    Warranty Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

    2



  • Page 3

    Feature highlight


    Digital Video Monitoring Platform



    2.4GHz Frequency Hopping Spread Spectrum Technology



    200m Effective Coverage Range



    2.4” Color TFT Display



    Camera Resolution up to 300kpixel



    3D vertically tilting camera (90 °)



    Night Vision Function with 6 IR LEDs as Lighting Without Interference Baby Sleeping



    Vox Nite Lit – Auto Turn On / Off the Nite Lit by Baby Cry



    Desktop or Baby Crib Mount



    Voice activation (VOX Control)



    Sound Bar Indicator



    Talk Back



    Vibration Alert



    Remote Turn On/Off the Soothing / Lullaby



    Temperature Monitoring



    Real Time Clock + 2 Event Timers



    Out of Range Alert



    Battery Low Alarm Visual and Audible

    3



  • Page 4

    Safety information
    Warning
    This baby monitoring device complies with all the relevant standards with regard to electromagnetic fields and is safe to use
    if it is used as described in the operating instructions. Therefore, please read these operating instructions carefully before you
    use the device.
    Explain the contents to your children and tell them about the dangers of using the device.
    The baby monitor was developed to provide extra security during the times when you can not be in the same room as your
    baby. This system does not replace responsible supervision of the baby by an adult. During use, an adult must always remain
    within the range of the baby monitor. The baby monitor is neither a medical device nor a device to prevent cot death.
    It is important that you check that your baby is well at regular intervals.
    Take care that the baby unit and the cable are always out of reach of your child (at least 1 metre distance).
    Never place the baby unit in the cot or playpen.

    Only use the mains unit supplied. Do not use any other plug-in mains units, as this could damage the device or the
    rechargeable batteries.
    Ensure that the voltage of the plug socket corresponds to that of the mains unit. A damaged mains unit must only
    be replaced with an original spare part.
    Do not use non-rechargeable batteries in the parent unit. Only use rechargeable batteries which comply with
    the specification (see „Technical Data“).
    Batteries and rechargeable batteries may explode if they are exposed to direct sunlight, fire or other sources of
    high temperature.
    Parent unit: Only use rechargeable batteries which comply with the specification (3x 750mAh AAA NiMH) as
    otherwise serious damage to health or injuries cannot be ruled out.
    Baby unit: Only use the specified batteries in the baby unit (AAA 1.5 V alkaline or type AAA rechargeable
    batteries), as otherwise serious damage to health or personal injury cannot be ruled out.
    Please remember to replace the batteries from time to time (at least once per year), to ensure that the baby
    unit will continue to function in case of mains failure. The baby unit does not have a charging function.
    Batteries which are obviously damaged must be replaced immediately.
    This prevents damage due to leaking batteries or rechargeable batteries.
    1. Remove the batteries/rechargeable batteries if you intend not to use the baby monitor for one month or
    longer.
    2. Do not leave discharged batteries in the baby monitor.
    The function of medical devices can be impaired. Note the technical conditions of the relevant environment,
    e.g. doctor‘s surgery.
    Please obtain information from the manufacturer of the device of you use medical devices (e.g. a pacemaker).
    The manufacturer can provide information with regard to the extent to which the device is immune to high
    frequency energies (See „Technical Data for information about your Gigaset product).
    The devices are not protected against splashed water. Therefore do not use them in wet areas such as
    bathrooms or showers.
    Do not immerse any part of the baby monitor in water or other liquids.
    With the exception of the battery compartment cover, the device and the mains unit must not be opened, as
    this may cause electric shocks. If the device does not function correctly, please do NOT try to remedy the
    problem yourself. In this case, please contact the Gigaset hotline.
    Do not use defective devices, as these may interfere with other radio services.
    Do not immerse the parent or the baby unit in water and do not clean them under running water.
    Do not use cleaning spray or cleaning agents.
    1. Pull the charging adapter of the parent or baby unit out of the socket if it plugged in.
    2. Clean the parent and baby unit with a damp cloth.
    3. Only clean the charging adapter with a dry cloth.
    Take care that both units are dry before reconnecting them to the mains.
    Only pass your Gigaset baby monitor on to other people together with the operating instructions.

    4



  • Page 5

    Safety information
    General
    Dear customer,
    We request that you read this information in order to quickly become familiar with this equipment and learn how to
    use its ­functions.

    Information regarding this user guide
    This user guide contains information on the PV830 baby monitor (referred to as ‘the equipment’ in the following) and
    provides important instructions on the initial use, safety, proper use and maintenance of this equipment. Always
    keep the user guide available near the equipment. Every person responsible for operating, repairing or cleaning
    the equipment must read and/or consult the user guide. Keep this user guide in a safe place and give it to the next
    owner of the equipment.

    Copyright
    This document is protected by copyright legislation. All rights are reserved, including rights of photo mechanical
    reproduction, copying or distribution using specific means such as data processing, data storage media or data
    networks, either in full or in part, as well as technical changes and changes to the contents.

    Proper use
    This equipment is exclusively intended for private (non-professional) use in closed rooms for monitoring babies. All
    other forms of use are improper and can lead to hazards. Always follow the instructions provided in this user guide.
    No liability is accepted for any loss or damage resulting from improper use. The user of the equipment is exclusively
    responsible for all risks.

    5



  • Page 6

    Operating elements
    The baby monitor consists of two units: one for the parents and one for the baby. They are connected by a
    wireless link compliant with the 2,4 GHz FHSS standard.
    Thanks this digital technology, this equipment is protected against eavesdropping and immune to interference
    from other ­equipment. The baby unit starts transmitting as soon as the microphone picks up a sound. The sound is
    reproduced by the ­parent unit. The microphone sensitivity can be adjusted by the user (see “Vibrator function”(11)).
    Note
    The baby monitor can never replace proper supervision by an adult; it only provides support.

    Baby unit components

    A

    1 Night light
    2 Infrared LED
    3 Lens
    4 On/Off LED
    5 Page button
    6 Speaker
    7 Microphone
    8 Room temperature sensor
    9 On/Off button
    10 Volume up button

    1

    A

    8

    2
    3

    1

    7

    7

    4
    5
    2
    3

    15

    4
    5
    6

    15

    9
    10
    8
    11
    9
    10
    11

    ⓫ Night light on/off switch
    ⓬ Connector for AC mains adapter
    ⓭ Crib connector nut
    ⓮ Battery compartment lock
    ⓯ Volume down button

    14
    6

    13

    12

    13

    12

    14

    B
    Parent unit components

    16

    B

    26
    24

    17
    16
    18
    17
    19
    20

    23
    22

    18
    23
    22

    21

    25
    24

    29
    26
    30
    29

    27
    25

    30
    28
    27

    19
    20
    28

    21

    6

    ⑯ On/Off button
    ⑰ 2,4” Colour LCD Display
    ⑱ OK button
    ⑲ Lullaby on/off button
    ⑳ Increase volume / Next menu item
    ㉑ Microphone
    ㉒ Decrease volume /Previous menu
    item
    ㉓ Menu button
    ㉔ Vibration on/off switch
    ㉕ VOX sensitivity switch
    ㉖ Speaker
    ㉗ Belt clip
    ㉘ Battery cover
    ㉙ Push to talk button
    ㉚ Connector for AC mains adapter



  • Page 7

    Initial use
    Package content
    The equipment is supplied as standard with the following items:
    1 baby unit
    1 parent unit
    2 AC mains adapters
    1 Crib connector
    1 Belt clip
    1 user guide
    3x AAA Ni-Mh batteries

    Installing batteries in the baby unit
    Note

    • You can operate the baby unit with 3 AAA cells (LR03; we recommend alkaline cells) or the included AC mains adapter.
    • The baby unit cannot recharge batteries.
    • You can only use the power adapter or the batteries, not together.

    ► Remove the crib connector from the base of the baby unit by turning the connector counter clockwise.
    ► Open the battery cover lock on the battery container.
    ► Remove the battery container cover by turning the cover clockwise.
    ► Install 3 AAA alkaline cells (LR03) in the battery compartment. Ensure that the polarity is correct.
    ► Release the battery wire and insert through the hole.
    ► Close the battery compartment.
    ► Plug the battery container plug in the power adapter connector.
    Note
    Never mix used cells with fresh cells.

    Connecting the baby unit to the AC mains
    Insert the small plug of the AC mains adapter in the mains power connector of the baby unit ⓬ and plug the
    AC mains adapter into a mains connector (100~240 V - 50/60 Hz).

    Installing the rechargeable batteries in the parent unit

    Note
    It takes around 8-10 hours to fully charge the batteries.

    7

    -

    AAA

    + AAA

    -

    -

    Connecting the parent unit to the AC mains
    Insert the small plug of the AC mains adapter in the mains power connector ㉚ and
    plug the AC mains adapter into a mains connector (100~240 V - 50/60 Hz).

    + A
    AA

    +

    ► Remove the belt clip ㉗ by pulling the nib and sliding downwards.
    ► Open the battery cover ㉘.
    ► Install 3 AAA Ni-MH batteries in the battery compartment as indicated.
    ► Carefully close the battery compartment and re-install the belt clip.



  • Page 8

    Installing the PV830
    CAUTION
    Do not place the camera and wires within the baby’s reach! Fix the camera at least 1 meter away from the baby.

    Baby unit components
    The PV830 can be fixed to a baby bed using the supplied crib connector.
    Install the crib connector, well fixed, as illustrated.
    Fine tuning:
    ► Place the camera in a convenient location, point the lens of the camera
    to the observation area.
    ► Adjust the angle by rotation the camera.

    TOP BABY BED

    Parent unit components
    The supplied belt clip lets you put up the parent unit on a level surface.
    Remove the belt clip ㉗:
    ► Lift the detent and push the clip down.
    ► Turn the belt clip by 180° and push the two detents that appear into
    the ­fixture of the belt clip on the parent unit.

    Operation and use
    Switching the baby unit and parent unit on and off
    ► Press the on/off switch ⑯ to switch on the parent unit.
    The display ⑰ is activated.
    Press
    the on/off switch 9 to switch on the baby unit.

    The on/off LED 4 is activated.

    A

    1
    8

    2
    3

    9
    10

    15

    4
    5

    11

    7

    Note

    6

    The parent unit will try to establish a connection with the baby
    unit. If captured image from the camera is displayed, a connection has been established.

    14
    13

    12

    B

    ► By pressing OK button ⑱, if captured image is visible,

    16

    the picture could be zoomed once.
    ► Press and hold the on/off switch ⑯ to switch off the parent unit
    until the display goes blank.
    ► Press the on/off switch 9 to switch off the baby unit.

    26
    24

    29

    17
    25
    18
    23

    30
    27

    19
    20

    22

    28
    21

    Checking the connection between the parent unit and the baby unit
    You should always check the wireless connection when you use the ­baby monitor for the first time.
    ► Put the parent unit in the same room as the baby unit, ­separated by at least two metres.
    ► Switch on both devices. The parent unit will try to establish a connection with the baby unit.
    ► The display of the parent unit will show the captured image from the baby unit after the connection has been
    established (monitor mode).
    The
    sounds picked up by the microphone 7 are reproduced by the parent unit. The sound level is indicated in

    the bottom of the display.
    ► If no connection is established, a repeating beep is audible.
    Out of range indication
    The maximum range between the parent- and baby unit is 200 meter in open area. Different factors, such as bricks
    and plaster walls, will reduce the range. Moreover, reinforced concrete floors will influence the range tremendously.
    In a residence, normal operating range is up to 30 meters (up to 2 floors).
    ► If the connection is interrupted, a repeating beep is audible.
    ► Reduce the distance between the parent and baby units until a new connection is established.

    8



  • Page 9

    6

    14
    13

    Settings

    12

    B
    16

    Setting the volume of the parent unit
    There are 7 volume levels.
    ► Press button ⑳ to increase the volume.
    ► Press button ㉒ to decrease the volume.

    26
    24

    29

    17
    25
    18
    23

    30
    27

    19
    20

    22

    28

    Setting the display brightness
    When the display is on.
    ► Press the menu ㉓ button. The setting menu is displayed.
    ► Press the + ⑳ button until the wrench symbol is highlighted.
    ► Press the OK button ⑱.
    ► Press the + ⑳ or - button ㉒ to select the desired brightness icon
    ► Press the OK button ⑱.
    ► Press the + ⑳ or - button ㉒ to select the desired brightness (7 steps).
    ► Press the OK button ⑱ to confirm.
    ► Press the menu button ㉓ 2 times to leave the menu.

    21

    Mirror the image
    Depending the position of the camera, it can be necessary to mirror or rotate the image.
    ► Press repeatedly on the menu ㉓ button until the wrench symbol is highlighted.
    ► Press the OK button ⑱.
    ► Press the + ⑳ or - button ㉒ to select the to mirror the image or to rotate the image 180°.
    ► Press the OK button ⑱.
    ► Press the + ⑳ or - button ㉒ to select the desired image.
    ► Press the OK button ⑱ to confirm.
    ► Press the menu button ㉓ 2 times to leave the menu.
    Temperature indication
    When the display is on, the baby’s room temperature is displayed in the middle of the display.
    An alarm can be set when the temperature reaches the upper or lower limit.
    ► Press the menu ㉓ button. The setting menu is displayed.
    ► Press the + ⑳ button until the temperature symbol is highlighted.
    ► Press the OK button ⑱.
    ► Press the + ⑳ or - button ㉒ to select the change the upper limit.
    ► Press the OK button ⑱.
    ► Press the + ⑳ or - button ㉒ to select the change the lower limit.
    ► Press the OK button ⑱ to confirm.
    ► Press the menu button ㉓ 2 times to leave the menu.
    When the room temperature is exceeding the limits, a audio signal is audible
    and the temperature flashes on the display.
    Setting the clock
    When the display is on, the clock is displayed on top of the display. To set the clock
    ► Press the menu ㉓ button. The setting menu is displayed.
    ► Press the + ⑳ button until the clock symbol is highlighted.
    ► Press the OK button ⑱ to select the clock setting icon.
    ► Press the OK button ⑱ to confirm. The hour indication is red.
    ► Press the + ⑳ or - button ㉒ to change the hour.
    ► Press the OK button ⑱ to confirm. The minutes indication is red.
    ► Press the + ⑳ or - button ㉒ to change the minutes.
    ► Press the OK button ⑱.
    To select the time format after setting the time.
    ► Press the + ⑳ or - button ㉒ to select AM/PM or 24 hours.
    ► Press the OK button ⑱ to confirm.
    ► Press the + ⑳ or - button ㉒ to switch between AM/PM or 24 hours.
    ► Press the OK button ⑱ to confirm.
    ► Press the menu button ㉓ 2 times to leave the menu.

    9



  • Page 10

    6

    14
    13

    Settings

    12

    B

    Night light
    The PV830 has a night light from which the intensity changes depending on
    the environment.
    The night light can be remotely activated. Make sure that the night light
    switch ⓫ on the baby unit is set to ‘On’.

    16

    25
    18
    23

    45

    The night light will be turned on for 45 minutes.

    60

    The night light will be turned on for 60 minutes.

    VOX

    The night light will go on automatically when the
    voice of the baby is detected (VOX). When the
    voice is no longer detected, the light will turn off.

    On

    The light will burn continuously.

    Off

    The light will be switched off.

    28

    Lullabys
    There are totally 9 lullabys that can be selected.
    ► Press the menu ㉓ button. The setting menu is displayed.
    ► Press the + ⑳ button until the music note is highlighted.
    ► Press the OK button ⑱.
    ► Press the + ⑳ or - button ㉒ to set the lullaby or set the time of the lullaby.
    It´s also possible to press and hold the + ⑳ or - button ㉒ to select lullaby/melody
    To select the lullaby
    ► Press the OK button ⑱ when music note is blinking.
    ► Press the + ⑳ or - button ㉒ to select the desired melody (1-9). When ‘ALL’ is selected,
    all lullabys will be played in a row. To de-activate the lullaby function, select .
    Press
    the OK button ⑱ to confirm.

    To select the time that lullaby needs to play.
    ► Press the OK button ⑱ when time is blinking.
    ► Press the + ⑳ or - button ㉒ to select the time (10/15/30/60 or 90 minutes).
    When ‘ON’ is selected, the lullaby will play ­continuously.
    Press
    the OK button ⑱ to confirm.

    Press
    the menu button ㉓ 2 times to leave the menu.

    To activate/deactivate the lullabys, press the lullaby button ⑲ on the parent unit.
    If volume is off on parent unit, lullaby mode will be shown by lullaby icon on display.
    The volume of the lullabys can be changed by the volume up 10 or down button ⓯ on
    the baby unit.

    10

    30
    27

    19
    20

    22

    ► Press the menu ㉓ button. The setting menu is displayed.
    ► Press the + ⑳ button until the night light symbol is highlighted.
    ► Press the OK button ⑱.
    ► Press the + ⑳ or - button ㉒ to select the desired night light setup.
    The night light will be turned on for 30 minutes.

    29

    17

    21

    30

    26
    24



  • Page 11

    6

    14
    13

    Settings

    12

    B

    Feeding/medicine alarm
    2 event alarms can be set.
    ► Press the menu ㉓ button. The setting menu is displayed.
    23
    ► Press the + ⑳ button until the alarm symbol is highlighted.
    22
    Press
    the
    OK
    button
    .


    ► Press the + ⑳ or - button ㉒ to select alarm 1 or 2.
    ► Press the OK button ⑱ to confirm. The hour indication is red.
    ► Press the + ⑳ or - button ㉒ to change the hour.
    ► Press the OK button ⑱ to confirm. The minutes indication is red.
    ► Press the + ⑳ or - button ㉒ to change the minutes.
    ► Press the OK button ⑱.
    ► Press the + ⑳ or - button ㉒ to select ‘ON’ or ‘OFF’.
    ► Press the OK button ⑱ to confirm.
    ► Press the menu button ㉓ 2 times to leave the menu.
    When the timer alarm is audible, press a button on the parent unit to switch off.
    If you don’t change the status to ‘OFF’ in the setting menu, the alarm will sound daily.

    16

    26
    24

    29

    17
    25
    18

    30
    27

    19
    20
    28
    21

    Talking with your baby
    You can use the parent unit to talk with your baby.
    Note
    Allow your baby to get used to the talk function before you use it in practice.The volume can be changed by the volume up
    10 or down button ⓯ on the baby unit.

    ► Press the Talk button ㉙ on the parent unit and hold it pressed.
    ► Hold the parent unit vertical with the microphone approximately 10cm from your mouth, and speak into the
    microphone.

    ► Release button ㉙ when you have finished talking.
    Vibrator function
    When an alarm is active, voice is detected in VOX mode or when the temperature exceed the set levels, a vibration
    can be activated together with the sound.
    The vibration can be set by the switch ㉔ on the parent unit (ON/OFF).
    Voice activated transmission (VOX)
    During night and to save energy, the PV830 can be set in VOX mode.
    In VOX mode, the display will be activated as soon as the microphone of the baby unit will capture sound.
    The VOX can be set by the switch ㉕ on the parent unit:
    OFF

    The display will be continuously active.

    L

    The baby unit will pick up louder sounds.

    H

    The baby unit will pick up weaker sounds.

    Night vision
    The camera has 6 high-intensity infrared LED’s 2 for picking up clear images in the dark. When the build in light
    sensor measures the ambient light level as low, the LED’s will automatically activate.
    Note
    The image changes automatically into black and white mode under the night vision mode.

    11



  • Page 12

    Cleaning and maintenance
    This section contains important instructions for cleaning and maintaining the equipment. Follow these instructions
    to ensure trouble-free use and prevent damage to the equipment due to improper maintenance.
    Cleaning
    ► Clean the equipment with a soft, slightly dampened cloth.
    ► Clean soiled connectors and contacts with a soft brush.
    ► Clean the battery contacts and battery compartment with a dry, lint-free cloth.
    ► If the equipment gets wet, switch it off and remove the batteries immediately.
    Wipe the battery compartment dry with a soft cloth in order to minimize potential water damage. Leave the battery
    compartment open until it is completely dry. Do not use the equipment before it is completely dry.
    Maintenance
    ► Check the batteries (regular or rechargeable) in the equipment regularly and replace them when necessary.
    ► Check the connectors and cables for defects.

    12



  • Page 13

    Troubleshooting
    This section provides important instructions for localising and correcting problems.
    Follow these instructions in order to avoid hazards and damage.
    Problem causes and solutions
    The following table is intended to help you localise and solve minor problems.
    Problem

    Possible cause

    Solution

    The rechargeable battery pack
    of the parent unit does not
    charge

    Charging station plug not connected

    Connect plug

    Dirty contacts

    Clean the battery terminals and charging station contacts with a soft cloth

    A rechargeable battery is defective

    Replace the batteries

    The rechargeable batteries are not
    charged

    Charge the batteries

    Equipment defective

    Contact customer service

    Baby unit is not switched on

    Switch on the baby unit

    The parent unit and baby unit are too
    far apart

    Reduce the distance between the
    parent unit and the baby unit

    The parent unit does not reproduce the sounds picked up by
    the baby unit

    The volume setting of the parent unit
    may be too low.

    Increase the volume setting of the
    p
    ­ arent unit

    The microphone sensitivity of the
    baby unit may be set too low.

    Check the VOX sensitivity and the
    volume setting of the parent unit and
    increase if necessary.

    Limited range and interference
    during transmission

    The range of the equipment depends
    on the surroundings.Steel structures
    and concrete walls can impair transmission.

    Avoid obstacles as much as possible.

    The equipment emits a
    high-pitched whistle

    The parent unit and baby unit are too
    close together

    Increase the distance to at least 2
    metres

    Parent unit does not switch on
    ­(display remains black)

    The ‘out of range’ alarm is
    audible

    Reset
    To reset the unit back to the factory settings:
    ► Press the menu ㉓ button. The setting menu is displayed.
    ► Press the + ⑳ button until the reset symbol is highlighted.
    ► Press the OK button ⑱.
    ► The OK symbol is blinking, press the OK button ⑱ to confirm the reset.
    ► If you want to leave the menu without reset, select the exit icon.
    ► Press the OK button ⑱ to confirm.
    ► Press the menu button ㉓ 2 times to leave the menu.

    13



  • Page 14

    Storage and disposal instructions
    Note
    We recommend that you keep the box and packing materials so you can use them to transport the equipment in the future
    if necessary.

    Storage
    Remove the batteries (regular or rechargeable) from the parent unit and the baby unit. Store the equipment in a dry
    location.
    Waste disposal of package materials
    The package materials are environmentally friendly materials that can be given to your local waste collector for
    recycling.
    Waste disposal (environmental protection)
    Dispose of the equipment in accordance with the provisions of European Directive 2002/96/EC, Waste Electrical
    and Electronic Equipment (WEEE), regarding discarded electrical and electronic equipment. Contact your municipal
    waste disposal department for information.
    Dispose of batteries (regular or rechargeable) in an environmentally friendly manner in accordance with local regulations.

    Technical data
    Frequency 2,4GHz
    Range
    Outdoors: up to 200 m (Line of sight)

    Indoors: up to 30 m
    Operating temperature
    0°C to 40°C · 20% to 75% relative humidity
    Parent unit
    Display
    Rechargeable batteries
    AC mains adapter


    Dimensions
    Weight

    2,4” (6,6 cm) TFT LCD
    3x AAA Ni-MH rechargeable batteries.
    Model: S003IV0600050
    Input: 100~240V AC, 50/60Hz, 0,15A Max
    Output: 6V DC / 500mA
    approx. 64 x 125 x 32 mm
    227g (without rechargeable batteries)

    Baby unit
    Image sensor
    Lens
    Night vision
    Batteries
    AC mains adapter


    Dimensions
    Weight

    Colour CMOS
    f 4.4mm, F 3.0
    6 Infrared LED
    3 Alkaline cells (LR03/AAA) (not included)
    Model: S003IV0600050
    Input: 100~240V AC, 50/60Hz, 0,15A Max
    Output: 6V DC / 500mA
    approx. 100 x 100 x 160mm
    132g (without batteries)

    14



  • Page 15

    Customer Service & Help
    Step by step to your solution with Gigaset Customer Service www.gigaset.com/service
    Register your Gigaset device under
    www.gigaset.com/register
    immediately after purchase - in this way we can help you even quicker in case
    of any queries or warranty claims.
    Your personal customer account enables:

     Management of your personal details,
     Registration of your Gigaset products,
     Online registration of repairs and
     Subscription to our Newsletter.

    Visit our customer service website:
    www.gigaset.com/service
    Here you can find:
     Questions and answers
     Free downloads of software and operating instructions
     The Gigaset customer forum
    Contact our service staff:
    Were you unable to find a solution under „Questions & Answers“?
    We will be glad to help you ...
    ...by telephone during opening hours Sun. 11 pm - Fri. 11 pm continuously
    under 084503 18190 (local call cost charge)
    ... or 24/7 by email under www.gigaset.com/contact
    Please have your proof of purchase at hand.
    On the outer packaging (box) of the product, next to the CE mark, it is clearly stated for which country or countries
    the particular device and its accessories was developed.
    If the device or its accessories are not used according to this information, the information in the operating
    instructions or on the product itself, this may invalidate any warranty claims (repair or replacement).
    Before making a warranty claim, the purchaser is requested to provide the proof of purchase, which states the date
    of purchase and the product which has been purchased.

    Authorisation
    This device is intended for use worldwide. Use outside the European Economic Area (with the exception of
    Switzerland) is subject to national approval. Country-specific ­requirements have been taken into consideration.
    We, Gigaset Communications GmbH, declare that this device meets the essential ­requirements and other relevant
    regulations laid down in Directive 1999/5/EC.
    A copy of the Declaration of Conformity is available at this Internet address:
    www.gigaset.com/docs

    15



  • Page 16

    Our environmental mission statement
    We, Gigaset Communications GmbH, bear social responsibility and are actively committed to a better world. Our
    ideas, technologies and actions serve people, society and the environment. The aim of our global activity is to secure sustainable life resources for humanity. We are committed to a responsibility for our products that comprises their
    entire life cycle. The environmental impact of products, including their manufacture, procurement, distribution,
    utilisation, service and disposal, are already evaluated during product and process design.
    Further information on environmentally friendly products and processes is available on the Internet at
    www.gigaset.com.
    Environmental management system
    Gigaset Communications GmbH is certified pursuant to the international standards ISO 14001
    and ISO 9001.
    ISO 14001 (Environment): Certified since September 2007 by TÜV
    SÜD Management Service GmbH.
    ISO 9001 (Quality): Certified since 17/02/1994 by TÜV SÜD Management Service GmbH.

    Disposal
    Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations,
    details of which can be obtained from your local ­authority.
    All electrical and electronic products should be disposed of separately from the ­municipal waste stream via
    designated collection facilities appointed by the ­government or the local authorities.
    This crossed-out wheeled bin symbol on the product means the product is covered by the European
    Directive 2002/96/EC. The correct disposal and separate collection of your old appliance will help
    prevent potential negative consequences for the environment and human health.
    It is a precondition for reuse and recycling of used electrical and electronic equipment.
    For more detailed information about disposal of your old appliance, please contact your local council

    refuse centre or the original supplier of the product.

    16



  • Page 17

    Warranty Certificate
    Regardless of his/her claims for faults against the vendor, the consumer (customer) is granted a warranty for this
    device according to the following conditions:
    • At the discretion of Gigaset Communications, production and/or material defects which occur within 24 months
    of the date of purchase of this device will be repaired free of charge, or the device will be replaced by a
    corresponding device which complies with the state-of-the-art. For wearing parts (e.g. batteries, housing, holder,
    buttons), this warranty applies for six months from the date of purchase.
    • This warranty does not apply if the device is damaged, has not been correctly used or serviced or unauthorised
    repairs have been made.
    • The warranty is conditional on the presentation of the dated proof of purchase. Warranty claims must be made
    within the warranty period within two months of the defect covered by the warranty becoming evident.
    • Replaced devices or their components, which are returned to Gigaset C
    ­ ommunications in the context of
    replacement become the property of Gigaset Communications.
    • This warranty applies to new devices which are purchased in the European Union. The warrantor for devices
    purchased in United Kingdom is
    Gigaset Communications UK Limited, 2 White Friars, Chester, CH1 1NZ.
    • Further, or other claims under this warranty are excluded, unless they are ­mandatory according to legal
    regulations.
    • If no warranty claim pertains, Gigaset Communications reserves the right to invoice the customer for the
    replacement or repair. Gigaset Communications will inform the customer of this in advance.
    • The provisions above do not constitute a change to the burden of proof to the detriment of the customer.
    Please contact Gigaset Communications to redeem this warranty.

    17



  • Page 18

    Issued by
    Gigaset Communications GmbH
    Frankenstr. 2a, D-46395 Bocholt
    © Gigaset Communications GmbH 2014
    Subject to availability.
    All rights reserved. Rights of modification reserved.
    www.gigaset.com

    *A31008-N1160-L101-1-7619_EN*

    18

    CD PV830 (GS3)

    P31008-N1160-R101-1-X1






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset PV-830 video wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Gigaset PV-830 video in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,95 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Gigaset PV-830 video

Gigaset PV-830 video Bedienungsanleitung - Deutsch - 18 seiten

Gigaset PV-830 video Bedienungsanleitung - Holländisch - 18 seiten

Gigaset PV-830 video Bedienungsanleitung - Französisch - 18 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info