Bedienungsanleitung Gossen Digipro F (Seite 6 von 10) (Englisch)

571659

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

GOSSEN Foto- und Lichtmesstechnik GmbH 6

3.4 Setting and measuring correction values

(see Section 3.4.4 Important remarks concerning correction values, page 6)

3.4.1 Setting correction values

• Select COR with the function buttons (the last valid correction

value appears in the display)

• Enter or change the correction value with the value buttons

The extension factor is shown in the right-hand digital display,

and the correction value in stops in the left-hand section.

Enter in 1/10th stops (small figure) within a range of ±7.9 exposure values.

A figure preceded by „–“ indicates an exposure extending correction.

Example: –3.1 stops equal factor 8.6.

In the event of an exposure shortening correction, only the left-hand display appears as an exposure value difference

in stops.

3.4.2 Measuring correction values

Correction values can also be directly measured. An evenly illuminated

surface and constant light level are required. Measure in the reflected mode.

• Press measuring button M and get a reference reading:

displayed as rF--

• Weaken light by holding e.g. a grey filter in front of the measuring

aparture. Press meassuring button M

The light reducing factor will be diplayed automatically in stops

at the right, as extension factor at the left.

Pressing one of the function buttons will transfer the correction value

to the memory of the Digipro F. The COR value is now automatically

taken into account in all subsequent measuring functions. The frame

around COR is retained as a reminder that a correction value was

entered.

3.4.3 Cancelling correction values

• Select COR with the function buttons

• Press measuring button (display rF --)

Select any other function with one of the function buttons.

Correction value is cancelled, and the frame around COR

disappears.

3.4.4 Important remarks concerning correction values

The Digipro F is a precision meter calibrated with great accuracy to provide exact exposure data. Should you still not

be satisfied with the results, then you should remember that there are independent variables that can influence the

success of your exposures.

For instance:

the „true“ speed of your film can deviate from that on the pack

the „true“ shutter speeds and f-stops of your camera can differ slightly form the rated values

Deviations can arise when the film is processed.

Also there must be added purely subjective factors and matters of personal preference in the assessment of the

finished photos. However, you can calibrate your Digipto F to characteristics of your camera, your brand of film, your

processing methods, and to your projector.

We recommend the following procedure:

Take the readings of a few normal subjects with the utmost care by the reflected and incident light measuring

methods, and take five shots of each subject on colour reversal film. The first picture should be exposed with the

exposure settings supplied by the Digipro F. The exposure settings for the remaining shots are then increased and

decreased, respectively, by half an f-stop and then a full

f-stop. Make a note of the shooting conditions. These must not change while the five shots are being taken. Now

select from the processed pictures the one you consider to be optimal and compare its settings with the meter

readings.

If you find that you prefer exposures taken with settings that differ from those supplied by the meter, then these

settings can be programmed, as a correction, into your Digipro F. With your correction, the Digipro F will give precise

readings to produce optimal exposure results.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gossen Digipro F Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gossen Digipro F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info