Bedienungsanleitung Grizzly EHS 600-61 R (Seite 101 von 136) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Polnisch, Türkisch)

505485

101

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

101

• Stay alert, watch what you are do-

ing and use common sense when

operating a power tool. Do not use

a power tool while you are tired or

under the inuence of drugs, alco-

hol or medication. A moment of in-

attention white operating power tools

may result in serious personal injury.

• Use personal protective equipment.

Always wear eye protection.

Protective equipment such as dust

mask, non-skid safety shoes, hard

hat, or hearing protection used for

appropriate conditions will reduce

personal injuries.

• Prevent unintentional starting.

Ensure the switch is in the off-

position before connecting to

power source and/or battery pack,

picking up or carrying the tool.

Carrying power tools with your nger

on the switch or energising power

tools that have the switch on invites

accidents.

• Remove any adjusting key or

wrench before turning the power

tool on. A wrench or a key left

attached to a rotating part of the power

tool may result in personal injury.

• Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

• Dress properly. Do not wear loose

clothing or jewellery. Keep your

hair, clothing and gloves away

from moving parts. Loose clothes,

jewellery or long hair can be caught in

moving parts.

• If devices are provided for the

connection of dust extraction and

collection facilities, ensure these

are connected and properly used.

Use of dust collection can reduce

dust-related hazards.

Power tool use and care

• Do not force the power tool. Use

the correct power tool for your ap-

plication. The correct power tool will

do the job better and safer at the rate

for which it was designed.

• Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot

be controlled with the switch is

dangerous and must be repaired.

• Disconnect the plug from the

power source and/or the battery

pack from the power tool before

making any adjust -ments,

changing accessories, or storing

power tools. Such preventive safety

measures reduce the risk of starting

the power tool accidentaIly.

• Store idle power tools out of

the reach of children and do not

allow persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

• Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tool’s operation. If damaged,

have the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

• Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less Iikely to

bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions

and the work to be performed.

Use of the power tool for operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grizzly EHS 600-61 R Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info