Bedienungsanleitung Grizzly EHS 600-61 R (Seite 104 von 136) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Polnisch, Türkisch)

505485

104

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

104

through the opening at the han-

dle and suspend in the tension

relief at the grip (8).

2. Connect the device to the mains

voltage.

3. To switch on, hold down the

safety switch on the bow handle

(4) and press the on/off switch

(7) on the handle at the same

time. The hedge trimmer runs at

top speed.

To switch off, release the on/off

switch. The braking effect can

cause the formation of sparks

in the area of the top ventilation

slits. This is normal and harm-

less to the equipment.

Working with the Electric

Hedge Trimmer

During cutting work, ensure that no

contact is made with objects, e.g.

such as wire fencing or main plant

stems. This may result in damage

to the cutter bar.

• Switch off the equipment immedi-

ately in the event that the blades are

blocked by solid objects, pull out the

power plug then remove the object.

• Always work away from the mains pow-

er outlet. Set the cutting direction before

starting work. Ensure that the power

cable is kept well away from the work-

ing area. Never lay the cable over the

hedge, where it could easily be caught

up in the trimmer blades.

• Avoid overstraining the equipment dur-

ing work.

 Pulloutthepowerplugimme-

diatelyifthecableisdamaged,

badlytwistedorhasbeencom-

pletelycutthrough.

Adjusting the Grip:

The trimmer is equipped with an adjustable

grip. The grip can be set to four positions

in addition to the default position. Simply

select the position with which you are most

comfortable working. For example, the grip

can be turned 90° clockwise or anti-clock-

wise for cutting up or down. The 45° setting

is ideal for shaping and round cuts.

 Donotpressthegripreleasebut-

ton( 6)andtheOn/Offswitch

( 7)atthesametime,asthis

willpreventyoufrombeingable

tosetthegrip.

Pressing the release (6) will allow you to

twist the grip clockwise or anti-clockwise to

45° or to 90°, where you will hear it auto-

matically click into place. The grip can be

set only with the unit switched off.

Cutting Techniques

• Cut thick branches beforehand using a

branch clippers.

•

The double-sided cutter bar enables cut-

ting in both directions or, with a swinging

action, from one side to the other.

• In case of vertical cutting, move the

hedge trimmer uniformly forward or up

and down in an arc movement.

• In case of horizontal cutting, move

the hedge trimmer in a sickle-shaped

movement to the edge of the hedge,

so that cut branches fall to the ground.

• In order to achieve long straight lines,

the placing of tensioned guiding cords

is recommended.

Cutting Shaped Hedges:

It is recommended that hedges be cut in a

trapezoidal shape, in order to prevent strip-

ping off of the lower branches. This cor-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grizzly EHS 600-61 R Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info