ENGLISH
61
Selecting sound settings
1 Press »SETUP« to open the main menu.
2 Select »Defaults« with »
a
« or »
s
«.
3 Select »Audio« with »
S
« or »
A
« and confirm with
»ENTER«.
Note:
The rest of the process is described in the following sections,
starting from step 1.
Selecting the digital output
Here you select whether the audio signal is emitted from the
»DIGITAL AUDIO OUT« sockets in the original data format
(bitstream) or in LPCM format (Pulse Code Modulation).
1 Select »Digital output« with »
S
« or »
A
« and press
»ENTER« to confirm.
2 Select the desired mode (»Bitstream« or »LPCM«) by pressing
»
S
« or »
A
« and press »OK« to confirm.
Note:
If you select the »Off« setting, there is no signal output at the
»DIGITAL AUDIO OUT« socket.
Setting the dynamic volume range
Dolby Digital soundtracks have a very dynamic range. When
played at high volume this can be a fascinating experience, which
may however cause disturbance late at night.
Simply reducing the volume does not produce pleasing results, and
the dialogue becomes difficult to understand. Select the »Low« or
»High« setting.
1 Select »Dynamic range« with »
S
« or »
A
« and confirm with
»ENTER«.
2 Select the desired setting (»Low« or »High«) with »
S
« or
»
A
« and confirm with »ENTER«.
Switching on virtual surround sound
You can switch the virtual surround sound effect on. Virtual
Surround is a process which appears to provide sound all around
the listener via only two loudspeakers.
1 Select »Virtual surround« with »
S
« or »
A
« and press
»ENTER« to confirm.
2 Switch on the virtual surround sound effect with »
S
« or »
A
«
and confirm with »ENTER«.
Finishing the settings
1 Press »SETUP« to finish the setting.
AUDIO SETTINGS ________________________________
Defaults
Video
Audio
Parental control settings
Special functions
VCR
Confirm with Enter End setup
Select
AS
Audio
Digital output Aus
Dynamic range Aus
Virtual surround Aus
Confirm with Enter End setup Select
AS
Select
digital output
Off
Bitstream
LPCM
Audio
Digital output Aus
Dynamic range Aus
Virtual surround Aus
Confirm with Enter End setup Select
AS
Select
dynamic range
Off
Low
High
Audio
Digital output Aus
Dynamic range Aus
Virtual surround Aus
Confirm with Enter End setup Select
AS
Select Virtual
Surround
Off
On
