ENGLISH
17
SETTINGS
____________________________
Manual settings
Setting the clock
When the device is switched on for the first time and no time signal is recei-
ved the clock starts with »00:00« in the display. The same applies after a
power failure, or if the device has been unplugged and no back-up batte-
ries have been inserted.
1 Press and hold down »TIME«.
2 Press »
<« or »>« briefly to set the time step-by-step or hold down to
run through the hours quickly.
3 Release »TIME« to conclude the setting.
– Display: the current time.
Setting the time zone
1 When the device is switched off, press »TIME« and hold it down.
2 Set the time zone with »SLEEP« (scale: »+0«,.»01«, »02«, »-02« and
»-01«).
– Display: e.g. »+2«.
Note:
If no support battery is inserted, the time is automatically set using
the DCF time synchronisation after a power cut, if the DCF reception is
sufficient for this. Alarm time and time zone synchronisation are each
rest to the values » 00:00« and » 00«. Please note that in such a case
you may be awoken by the alarm at the wrong time.
Setting the alarm time
1 Press »ALARM« and hold it down.
– Display: the last alarm time set.
2 Press »<« or »>« briefly to change the alarm time step-by-step or
hold down to run through the hours quickly.
3 Release »ALARM« to conclude the setting.
4 Use the slide switch »RADIO
•
9
ɷ
e ALARM« (on the left
side of the device) to set the alarm signal you require (»
ɷ
« = radio
station, »e« = signal tone).
– Display: the »ALARM
•
« LED lights up, which means the alarm set-
ting is activated.
– The device switches on at the set alarm time with the selected alarm
signal.
