Bedienungsanleitung Gude 1000 KG 55103 (Seite 8 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628790

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Servicing

Perform any servicing work after using and before storing the equipment. Servicing and repairs may only be executed by trained

professional staff.

(a) Clean the chain block thoroughly.

(b) Lubricate the chain block properly at all times. Lubricate the load hook chain and joint with oil.

Special attention must be paid to servicing when installing the chain block outdoors.

Chain and hook

The load hook and chain are made out of alloy steel and treated

thermally. Correction welding and thermal treatment on the load hook

and chain is strictly prohibited. This would result in changed material

properties.

(a) The chain life is sufficiently dimensioned. Nevertheless,

the life is shortened due to external influences.

If a length of 21 chain links given in table 1 is exceeded,

the chain must necessarily be replaced.

(b) The load hook gets deformed when handled unprofessionally

or when overloaded. The load hook must immediately be replaced

if the g dimension reaches the limit value specified in table 2.

Safety will not be guaranteed if the above-mentioned provision

is not provided.

Table 2: Hook opening

Hook opening (in inches)

Capacity

(ton)

Dimension (g)

new hooks

Replacement

when g=

½ 1- 3/16 1- 9/32

1 1- 5/16 1- 13/32

1,5 1- 7/16 1- 19/32

2 1- 11/16 1- 27/32

3 1- 11/16 1- 27/32

5 2- 15/32 2- 15/32

Gears arrangement during the installation process

For all chain blocks

The tooth (A) must be between the markings in the horizontal position.

One tooth must point to the centre while the other from the centre

outwards (see picture 2).

Warranty

Capacity

(ton)

Nominal

weight (kg)

Test weight

(kg)

½ 500 750

1 1000 1500

1 ½ 1500 2250

2 2000 3000

3 3000 4500

5 5000 7500

We herewith confirm that the product has been made under the supervi-

sion of our quality assurance and tested based on our quality require-

ments.

This is supported by our 2-year warranty. The warranty covers free prod-

uct repair if the failure has been caused by any construction element or if

the product is affected by any material, design or workmanship defect. To

review that, we need the product in the original condition (not disassem-

bled). Other claims, in particular, compensation of direct or indirect dam-

age, are excluded.

The warranty will not apply to any damage caused as a result of any

unauthorised use or overloading.

Table 1: Chain dimensions

Capacity

in tons

Chain

thick-

ness

Max. allowed dimension

½ 6.3 mm 21 chain links = 41.5 cm

1 6.3 mm 21 chain links = 41.5 cm

2 8.0 mm 21 chain links = 52.,5 cm

1.5 - 3 7.1 mm 21 chain links = 46 cm

5 8.0 mm 21 chain links = 52, cm

Length of 21 chain links

Mark

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude 1000 KG 55103 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info