564761
3
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
3
In the case of Type 1 stoves the closing springs of the
firebox door must not be removed if such an appliance will
be connected to a chimney with multiple-connection facility.
Classification as Type 1 is determined by self-closing
firebox doors. The firebox doors must only be opened to add
fuel and remove ash. Otherwise the doors must be kept
closed even if the stove is not operated to avoid
impairing other fireplaces and related hazards.
Adequate fresh air supply to the installation room must be
guaranteed. Windows and doors of the installation room
must not seal too tightly because of the necessary
combustion air supply. Even when operating waste air
systems (bathroom extraction fans, vapour extraction in
kitchens etc.) in your home or in living units connected with
the former it is imperative to ensure the unobstructed flow of
the required quantity of air to the stove.
Caution! The wood stove must not be operated jointly
with controlled home ventilation systems.
The operation of stoves is not threatened if the systems
circulate air only within a room or the systems have safety
installations which automatically and reliably prevent a
vacuum in the installation room. It is imperative to clarify
adequate combustion air supply with your master chimney
sweep.
By burning fuel, heat energy is liberated resulting in intense
heating of the surfaces of the heating appliance (doors, door
and operating handles, view window panes, side walls, front
walls, flue pipes). Touching these parts without suitable heat
protection gloves should be avoided! A heat protection glove
is supplied with the chimney stove.
When heating your wood stove do not wear any wide or
inflammable items of clothing!
Explain these dangers to children and keep them away from
the fireplace during heating.
If incorrect or over-moist fuel is used a chimney fire may
result due to deposits in the chimney. Immediately seal all
air openings in the stove and notify the fire brigade. Once
the fire in the chimney has died down have it inspected by a
specialist for cracks and leaks.
3. Data for calculating the chimney dimensions
according to DIN 4705 Part 2
The data to calculate the chimney dimensions according to
DIN 4705 Part 2 can be found in the enclosed Equipment
Sheet.
4. Installing and connecting the wood stove to
the chimney
Your new wood stove is optimally protected against damage
by the packaging. However, damages to stove or accessories
may have occurred during the transport despite this. For this
reason it is necessary to check your wood stove for damages
and completeness after unpacking! Immediately report any
defects to your specialist stove dealer!
Note: Draft baffle plates that are loose or have slipped from
the anchorage are not considered defects (see Chapter 5.3.
Initial start-up of your chimney stove).
The packaging of your wood stove is largely
environmentally neutral. The wood of the packaging is not
surface-treated and can be used as fuel after it has been
reduced in size. The cardboard and the foils can be easily
supplied to the communal station for residual material
utilisation.
Use a flue pipe of 2 mm thick steel sheet for connection to
the chimney.
The flue pipe must be firmly and tightly connected with both
the flue gas socket and the chimney. This firm and tight
connection is also a necessity for inter-joining the flue pipe
sections. It is imperative to ensure that the flue pipe does not
project into the free cross section of the chimney. To
introduce the pipe into the chimney the use of a masonry
liner is recommended.
In the case of extended flue gas piping horizontal sections
and constrictions must be avoided; piping rising in the
direction of the chimney is recommended. If there is low
chimney draft we recommend connecting the stove by way
of a vertical pipe section at least 1 m in length.
Safety distances (minimum distances):
When installing the wood stove the fire protection
regulations issued by the authorities must always be
followed. Ask your district master chimney sweep in this
regard.
The following minimum distance to combustible or
temperature-sensitive materials (e.g. furniture, wallpaper,
wood panelling) or supporting walls must be maintained (see
drawing):
A 20 cm to the rear wall,
B 20 cm to the side walls and
C 80 cm in the radiation area.
In the radiation area (C) no flammable building components
or furniture should be placed within a distance of 80cm from
the transparent window. This distance can be reduced to
40cm if a radiation protection plate that is well-ventilated on
both sides is placed between the stove and the flammable
building components.
Caution! In Corner Models and models with lateral
windows the minimum distance to combustible materials
and furniture specified on the nameplate must always be
followed.
In the case of combustible or temperature-sensitive flooring
the appliance must be placed on a non-combustible floor
protection slab (e.g. steel plate, glass).
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Haas-Sohn FUEGO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Haas-Sohn FUEGO

Haas-Sohn FUEGO Bedienungsanleitung - Deutsch - 6 seiten

Haas-Sohn FUEGO Bedienungsanleitung - Deutsch - 6 seiten

Haas-Sohn FUEGO Bedienungsanleitung - Französisch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info