Bedienungsanleitung Harman Kardon AVR85 (Seite 36 von 40) (Englisch)

502655

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

AVR85 120 rev (g) 6/14/97

Multiroom Operation

4. If the FIXED option has been chosen,

use the ‹ or › buttons i to enter the

desired volume level for the multiroom

output, as indicated by the numbers in

the highlighted video box. When the

VARIABLE option is chosen, this is the

volume setting that

will be used when the multiroom system

is first activated. In either case, set the

level as close to “0dB” as possible without

causing distortion in the output signal.

When the desired number has been

entered, press the ¤ button and then

Select to return to the main menu.

5. Press the

⁄

button i once so that

the on-screen cursor is pointing to

MULTI ROOM SEL and press Select

j. This will take you to the MULTI

ROOM SELECTOR menu.

6. At the MULTI ROOM SELECTOR

menu (see figure #18) use the ‹ or ›

buttons to select the input to the multi-

room system when the FIXED option is

selected. When the desired source is high-

lighted in reverse video, press the ¤ but-

ton twice and then press Select j to

return to the main menu. You may then

exit the menu system or adjust other

functions.

Operation

Multiroom operation is simple, and

it may be controlled from either the

main listening room where the AVR85 is

located, or from a remote room where an

IR receiver has been installed.

Main Room Control

To activate the feed to the remote room

from the room where the AVR85 is locat-

ed, press the Multi button #h on the

front panel or remote.

If the VARIABLE option was selected in

SETUP MENU 4, the Multi indicator

D will flash, indicating that Source Link

is in effect. This means that any change

to the AVR85 input in the main room will

also change the input to the remote zone

audio output. If the FIXED option was

selected, the Multi indicator will illumi-

nate in a steady state and the input to the

remote room will be the source selected

in the MULTI ROOM SELECTOR

menu.

Once the remote room feed is turned on,

it will remain on even if the AVR85 is

turned off for main room listening and

the front panel indicators go dark. The

Multi indicator will remain lit to remind

you that the feed is still active. To turn the

remote feed off, simply press the Multi

button #h. An on-screen message will

appear (see figure #19) to remind you

that people may be listening in another

room. Press the Multi button a second

time to turn the remote feed off, or press

the Clear button x to cancel the

menu and leave the remote room feed

on. Note that in some sources there may

be no code programmed into the Clear

button, so the menu will disappear from

the screen automatically in about ten

seconds.

MULTI RM VOL

VARIABLE

FIXED

SET LEVEL -30dB

RETURN TO MAIN MENU

SETUP MENU 4

Figure 17

SELECTED:TUNER TV

CD DVD

TAPE1 VCR1

OFF TAPE2 VCR2

AUX

VOL LEVEL:-37dB VARI

RETURN TO MAIN MENU

MULTI ROOM SELECTOR

Figure 18

TURN MULTI-ZONE OFF?

USERS MAY BE LISTENING

IN OTHER ROOMS

PRESS AGAIN TO PROCEED

OR "CLEAR" TO CANCEL

Figure 19

AVR85 om (g) 9/16/98 11:21 AM Page 33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR85 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info