Bedienungsanleitung Home Easy HE-108 (Seite 2 von 2) (Englisch)

558738

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Dimming:

To dim the HomeEasy Dimmer switch manually, switch on the lights and

then press and hold the touch sensor, the dimmer will now enter the

dimming cycle, to select the required level release the touch sensor.

To change direction of the dimming cycle release the button and then

press and hold again.

Manual Operation:

Switching ON/OFF:

To switch the HomeEasy light switch "ON" press the touch sensor once

and, press the touch sensor again to switch the unit "OFF".

Touch Sensor

LED

Up to Six remote control units can be paired with each HomeEasy Dimmer

Switch. To program the dimmer switch, switch the lights On and Off six times.

Deleting Remote Control:

To delete a remote control that has been paired with a dimmer switch, simply

switch the lights On and Off six times. The LED will start to blink and lights will

dim up and down in steps; press the "Off" button on the remote control, the

lights will flash on and off to confirm that the remote control has been

removed from the dimmers memory. A second remote control can now be

deleted from the dimmer switch or press the touch sensor to exit the mode.

Channel reset:

To delete all the remote control units from the memory of the dimmer switch,

switch the lights On and Off six times, the LED will start to blink and lights will

dim up and down in steps, switch the lights On and Off a further six times. The

lights will flash on and off, to confirm that the memory has been reset, press

the touch sensor to exit the reset mode.

Pairing with Remote Control:

The LED will now start to flash and lights will dim up and down in steps, now

press the "ON" button on the remote control, the lights will flash on and off, a

second remote control can now be paired to the dimmer switch or press the

touch sensor to exit the pairing mode. The units are now paired together, you

can test this by pressing the selected "ON/OFF" button on your remote

control.

Always refer to the original instruction when using with additional products

Remote Control Operation:

6. Ensure that all wires are fully sleeved and that only enough bare is

available to connect to the terminal. All wire must be fully inserted into

the terminals and fully tightened, so that the wires are secure and no

bare wires are protruding.

Dimmers with a metal cover plate must have an earth by means of the

earth connect point on the dimmer module

7. When the wires are connected, gently screw the dimmer unit into the wall

box, making sure that the plastic spacer is correctly aligned and that no wires

are trapped between the switch and the back of the wall box.

8. Replace the cover plate and restore the mains electrical supply.

The dimmer now needs to be activated. Press and hold the each of the

touch button(s) for 2 seconds to initialise the dimmer.

9. The dimmer now needs to be paired with a HomeEasy Remote control

- See Pairing/Deleting With Remote Control.

The HomeEasy Dimmer Switch is compatible with all HomeEasy Remote

Controls except the HE200 Programmable Timer Remote Control.

C H Byron

34, Sherwood Rd

Aston Fields

Bromsgrove

B60 3DR

Contact Details:

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

DK

FIN

IRL

EST

SLO

0560

Tel: 0845 2301231

Fax: 01527 557701

Web: www.chbyron.com

E-mail:

support@chbyron.com

Contact:   Helpline: 0845 2301 231

PLASTICS

10 - 15%

BRICK

10 - 40%

TIMBER

CONCRETE

METAL

GLASS

40- 80%

10 - 40%

90%

5 - 15%

Range Reduction Guide:

The operating distance is 25 Metres

1Gang Dimmer Switch: HE-107

Input: 230V ~50Hz

Load: 400W Max  Min:40W

Range: 25 Metres (Open Distance)

Frequency: 433.92MHz

Indoor Use Only

Warning: Never Exceed the Product Specification

Product Specification:

2Gang Dimmer Switch: HE-108

Input: 230V ~50Hz

Load: 250W Max  Min:40W

Range: 25 Metres (Open Distance)

Frequency: 433.92MHz

Indoor Use Only

The radio operating distance is reduced when the signal has to pass through

solid objects and the material type

i.e. internal walls.

Tip: Using a plastic wall (back)box will increase the operating range of the

dimmer switch.

Live

Wire Free Antenna

Earth Point

Plastic Spacer

Live

1 Gang Dimmer:

2 Gang Dimmer:

Dimmer Module A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Home Easy HE-108 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info