720357
5
Zoom out
Zoom in
Vorherige Seite
1/33
Nächste Seite
HQAA10010/HQAA10011
V. 03 21 /02/2020 5 ©Velleman nv
5. Connection
Decide where the appliance is to be physically installed it can be used free-standing or
mounted in a standard 19” rack requiring two rack spaces. When installed, makes sure
that both the front and the rear panels are unobstructed and that there is good
ventilation around the entire unit.
Before switching on the appliance, make sure the appliance is switched off and the
volume controls are at their minimum position. It is never a good idea to power up any
amplifier that is not connected to loudspeakers.
Use the correct connectors to connect the appliance to the loudspeakers and sound
system.
6. Using the Bridging Output
When the switch is placed in the STEREO position, the appliance functions as a true
stereo amplifier, where both channels (1 and 2) can receive different input signals and
produce independent output signals.
When the switch is placed in the BRIDGE position, channel 1 is routed to both power
amplifiers bridged together, producing a single output signal.
In BRIDGE mode, connect the red (+) terminal of channel 1 to the positive input of your
loudspeaker, and the red (+) terminal of channel 2 to the negative i nput of your
loudspeaker. Do not use the black (-) output terminals of either channel.
When using the amplifier in BRIDGE mode, please make sure that your speaker
impedance is greater than or equal to 8 Ω.
7. Care and Maintenance
Cleaning
Disconnect from the mains before any cleaning operation.
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh
chemicals, cleaning solvents or strong detergents.
Long Periods of Non-Use
Disconnect from the mains during long periods of non-use.
Service
This appliance should be serviced when:
The power cord or the plug has been damaged.
Objects have fallen or liquid has been spilled into the appliance.
The appliance has been exposed to rain or water.
The appliance does not appear to operate normally.
The appliance has been damaged.
Maintenance
Do not attempt any inspection or maintenance by yourself. Refer all servicing to
qualified personnel.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für HQ-Power HQAA10010 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info