604917
36
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
AU36
Error Messages
Error messages Possible causes What to do
No or bad signal
[Satellite]
The satellite dish is not
pointing at the satellite.
Adjust the dish alignment.
Signal is too weak.
Increase the LNB voltage or
connect a signal amplifier.
Satellite dish is too small. Change to a larger dish.
Problem with LNB Change the LNB.
Wrong antenna setting Set the antenna correctly.
The channel is scrambled
or not available.
The channel has a signal
but no audio or video.
Check if the channel is
currently on air. Please
contact the broadcasting
company.
The channel has
been deleted by the
broadcasting company.
Check if the channel is
currently on air. Please
contact the broadcasting
company.
The channel is for data
broadcasting.
Remove the channel from
the channel list and check
for new transponder
details.
The audio is not available.
The channel has a video
signal but no audio.
Press the audio button to
confirm that the channel
has audio options.
Error messages Possible causes What to do
No access
No access
Make sure you have
a subscription to the
channel.
No authorisation
If the product has been in
standby or power off for a
long time, please wait for
authorisation. It may take
up to 60 minutes.
No card inserted Smartcard is not inserted. Insert the Smartcard.
Incorrect card
Wrong Smartcard is
inserted.
Insert the correct
Smartcard.
Smartcard is not inserted
correctly.
Remove the Smartcard and
reinsert it.
Smartcard is damaged.
Contact your Smartcard
retailer or channel
broadcaster and ask for
replacement.
CI-Module not installed
CI-Module not installed
CI-Module is not inserted.
Insert the CI-Module.
CI-Module is not inserted
correctly.
Remove the CI-Module and
reinsert it.
CI-Module is not
recognised.
Insert another CI-Module
to check if the current one
is working.
Invalid CI-Module
Wrong CI-Module
Insert the correct CI-
Module.
CI-Module is damaged. Replace the CI-Module.
The antenna cable is
short-circuited.
[Satellite]
LNB cable is short. Replace the LNB cable.
LNB is internally short. Replace the LNB.
Alien substance is inserted
into the LNB IN port. The
port may be damaged.
Remove the alien
substance and contact the
service centre if the port is
damaged.
Appendix
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Humax HDR-1003S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info