518136
60
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
58
Care of Your Platinum
Trouble Shooting
Any Time you experience
a problem when sewing:
Insert new needle.
Rethread the top and bobbin threads.
Use different spool pin positions
(vertical or horizontal).
Use thread nets and quality thread. We
recommend the same sewing thread on
top and bobbin for general sewing. For
decorative sewing we recommend Rayon
embroidery thread on top and sewing
thread on bobbin. For embroidery we
recommend Rayon embroidery thread
on top and embroidery bobbin thread on
bobbin
Fabric puckers?
Check needle, it could be damaged.
The thread tension is too tight. Adjust
the thread tension.
Use the presser foot recommended on
the InfoDisplay.
Rethread top and bobbin threads.
Use quality thread.
Shorten stitch length.
• Use stabilizer.
Skipped stitches?
Check needle, it could be damaged.
Be sure the needle is inserted correctly
and all the way into the clamp.
Rethread top and bobbin threads.
Use recommended presser foot.
Turn machine off and on to reset.
Consult your dealer for service.
Needle breaks?
Use care not to pull fabric when sewing.
Insert needle correctly, see page 12.
Fabric does not move?
Raise feed teeth.
Increase stitch length.
Poor Tension?
Rethread top and bobbin - use quality
thread.
Insert new needle size.
Adjust the thread tension with the thread
tension buttons.
Upper Thread Breaks?
Does thread feed smoothly/not
catching?
Use thread nets and quality thread.
New needle size and type
Rethread top and bobbin threads - check
for correct threading.
Try different spool pin positions (hori-
zontal or vertical).
If stitch plate hole is damaged, replace
stitch plate.
Is the correct spool holder used in front
of the thread?
Bobbin thread breaks?
Wind a new bobbin.
Replace the bobbin in the machine, check
correct threading, page 10.
If stitch plate hole is damaged - replace
stitch plate.
Clean bobbin area.
Bobbin winds irregularly?
Check threading for bobbin winding.
Wrong stitch, irregular
or narrow stitches?
Turn machine off and on to reset.
Change needle, rethread top and bobbin
threads.
• Use stabilizer.
Machine sews slowly?
• Check speed.
Remove stitch plate and brush lint from
bobbin and feed teeth area.
Have the machine serviced at your dealer.
60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Husqvarna Platinum 955E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Husqvarna Platinum 955E

Husqvarna Platinum 955E Bedienungsanleitung - Deutsch - 64 seiten

Husqvarna Platinum 955E Bedienungsanleitung - Holländisch - 64 seiten

Husqvarna Platinum 955E Bedienungsanleitung - Französisch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info