Bedienungsanleitung Husqvarna Platinum 955E (Seite 61 von 64) (Englisch)

518136

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Care of Your Platinum

Machine will not sew?

• Put bobbin winder spindle up into

sewing position.

• Check plugs are all the way into machine.

• Check wall plug and power to wall

plug.

Unbalanced Buttonholes? (955E only)

If necessary, for speciality fabrics, you have

the possibility to adjust the buttonhole bal-

ance. To balance the stitch density of the

right buttonhole column, touch both arrow

buttons at the same time until the balance

icon

is visible on the InfoDisplay.

Use the stitch length buttons to adjust the

balance. (-) will make the stitches in the

right column closer together (more dense).

(+) will make the stitches further apart (less

dense).

By touching the

CLR button the machine

returns to stitch length/button size mode.

The balance setting will remain until Your

Platinum 955E is turned off.

NOTE: Only the right side stitch column will be

adjusted.

Embroidery Puckers? (955E only)

• Use correct stabilizer - see Accessory

User’s Guide.

• Hoop fabric tightly (page 47).

• Adjust thread tension (page 15).

Machine Will Not Embroider?

(955E only)

• Push embroidery unit À rmly into

machine socket.

• Insert a design or font Embroidery

d-Card.

• Slide on hoop.

• Is the used hoop the same size as indi-

cated on the InfoDisplay. If not select

correct hoop size.

Error Codes (955E only)

• “Er 01” and the d-Card icon Á ashes on

the InfoDisplay – a d-Card not sup-

ported by the machine is inserted.

• “

Er 02” and the d-Card icon Á ashes on

the InfoDisplay – a non-readable d-Card

is inserted. Remove the d-Card and insert

a font or design Embroidery d-Card.

• “

Er 03” and the d-Card icon Á ashes on

the InfoDisplay – the design is too large

to À t in available hoops.

• “

Er 04” an error occured while embroi-

dering, for example, a stitch co-ordinate is

outside the current hoop.

• A Á ashing “E” next to the thread spool

indicates that the top/bobbin thread has

run out or broken.

The sewing and embroidery machine

screen does not respond to touch

The socket on the back of the machine

where the embroidery unit is connected

can be sensitive to static electricity when the

embroidery unit is not connected. If the

sewing machine screen does not respond

to touch, turn the machine off and back on

again. If this persists, contact your authorized

Husqvarna Viking retailer.

Have your Platinum 775/955E

Serviced Regularly by your

Husqvarna Viking Dealer!

If you have followed this trouble shoot-

ing information and still are having sewing

problems, take the machine to your dealer.

If there is a speciÀ c problem, it is a great

help to test sew with your thread on a scrap

of your sewing

fabric. A sewing sample will often give

much better information than words.

Non-original Parts and Accessories

The Platinum 775/955E warranty does not

cover any defect or damage caused by use

of non-original accessories or parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Husqvarna Platinum 955E Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Husqvarna Platinum 955E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info