Bedienungsanleitung Huvema HU 1010 B-4 SINO (Seite 34 von 48) (Englisch)

627060

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED

sino diGiTal readoUT

1. sino diGiTal readoUT for TUrninG

2. inTrodUcTion

This manual starts with a part which mainly deals with general specifications of the Sino digital readout, safety

instructions and symbols. After that, the manual deals with all functions and operating instructions for the Sino

digital readout when used on a lathe.

3. Specications

Maximum power consumption ................................................................................... 25 VA

Voltage ........................................................................................................... 80V~260V

Supply voltage uctuation .............................. not to exceed +/- 15% of the operating voltage

Supply frequency .......................................................................................... 50 Hz~60 Hz

Operating temperature ......................................................................................... 0~45°C

Storage temperature ....................................................................................... -30°C~70°C

Relative humidity ............................................................................... < 90% (20 +/- 5° C)

Display resolution ............................................. 5 µm, 1 µm, 10 µm, 0.1 µm, 0.2 µm, 0.5 µm

Weight ................................................................................................................. 3.2 kg

Subject to change.

4. Safety

Before using the machine, it is your responsibility to read, understand and follow all of the safety

instructions in this manual. A safety-minded, informed operator is the most important safety aspect of

your machine. Accidents can be avoided.

4.1 Safety instructions - Digital readout

Wrong usage of the equipment results in accidents:

Only use the digital readout for what it was designed for.-

The digital readout must be grounded.-

Never open the house of the digital readout. This will lead to electric shock. -

Never try to repair the digital readout yourself. Always contact your dealer.-

Never use the digital readout in a moist environment. The digital readout may not come in contact -

with liquid, this will lead to electric shocks or re.

Never use the digital readout around (ammable) gasses.-

Rechargable lithium batteries are used in the digital readout. If the readout is not used for a long -

period of time, the batteries will become damaged.

Switch the digital readout and/ or machine immediately off when there is smoke or if it smells -

wrong. Continue operating will lead to electric shocks an / or re.

Make sure that the connections between encoder and digital readout are not broken. Damaged or -

broken connections lead to wrong data displayed on the digital readout.

Defective parts may only be replaced by original Sino spare parts.-

Never leave the machine with the digital readout unattended. Switch off the machine and -

disconnect it from the power source before you leave the work shop.

correct usaGe of the DiGital reaDout

Correct usage of the equipment means that:

the working capacity is not exceeded.-

qualied and capable people work with the digital readout.-

the safety instructions as described in this manual and as valid in your company are considered -

always.

4.2 Symbols

This manual uses a series of symbols and signal words which are intended to convey the level of

importance of the safety messages:

Attention!

Command in regard to a certain action.

Disconnect from the mains!

Instruction to disconnect the machine from the main power source to create a safe

situation.

Read the manual!

Command: read and understand the manual.