Bedienungsanleitung Ignis arl 113 (Seite 3 von 8) (Englisch)

340937

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

ENVIRONMENTAL HINTS

Packing

Do not throw the packing into the garbage: first sort out the

different materials (i.e.: steel, cardboard, polystyrene) fol-

lowing local regulations.

Conformity declaration

This appliance incorporates parts intended to come into contact

with foodstuffs in compliance with EEC directive 89/109/CEE.

Information

This appliance is free of CK'S (refrigerant circuit contains

R134a) or free of HK's (refrigerant circuit contains R600a

kobutane). For more details, please refer to the rating plate

on the appliance.

For appliances with lsobutane (R600a)

The refrigerant lsobutane is a natural gas of high environmen-

tal compatibility but which is inflammable. Therefore, it

es-

sential to ensure that the ducts of the refrigerant circuit do

not get damaged.

KNOW YOUR APPLIANCE

The refrigerator you have just bought allows the storage of fre-

sh foods. Please read these instructions carefully, as they include

a description of your appliance and the useful hints to enable

you to achieve the best performance required to store food.

DESCRIPTION OF THE APPLIANCE (Fig.

Temperature control

Adjustable grids

Glass separator

Crisper

Adjustable foot

Rating plate

Inner door liner with fitments

INSTALLATION

Ensure that the appliance is not damaged.

Transit damages must be reported to your dealer within 24

hours of receipt of the appliance.

The appliance shoult not be installed close to heat sources,

cookers, central heating boilers, direct sunlight, etc.

must

however be located in a well ventilated dry space

(Fig. 2).

the appliance

installed under a kitchen furniture, leave a

mm air gap.

Fit the spacer to the top of the black grill

(Fig. 3).

Ensure that

the appliance

level, by adjusting the foot indicated in

Fig.

Please allow the appliance to stand for one hour before con-

necting it to the electricity supply. We suggest that during this

time the interior is cleaned with a sponge dampened in a solu-

tion of water and vinegar, after which the shelves and racks

can be fitted into the appliances as indicated in

Fig. 1.

ELECTRICAL CONNECTION AND OPERATION

This appliance has been designed, built and marketed in

compliance with:

the safety targets of the "Low Voltage"

EEC

Directive

73/23;

the protection requirements of the

"EMC"

EEC

Directive 89/336 amended by

EEC

Directive 93/68.

Please check that the voltage indicated on the rating plate, situa-

ted inside the compartment, at the right hand side

(Fig. IG),

cor-

responds to the voltage in your home, 240V.

The earthing of this appliance

compulsory by law. The ma-

nufacturer will accept no liability for damage to persons or

objects arising from the non-observance of this requirement.

For Great Britain only:

ELECTRICAL INFORMATION

Fuse replacement

If the mains lead of this appliance is fitted with a

1363A 13

amp fused plug, to change a fuse in this type of plug use an

A.S.T.A. approved fuse to

1362 type and proceed as follows:

Light switch

WARNING -THIS APPLIANCE MUST

EARTHED

1. Remove the fuse cover (A) and fuse (B)

2. Fit replacement 13A fuse into fuse cover

3. Refit both into plug.

IMPORTANT:

The fuse cover must be refitted when chang-

ing a fuse and if the fuse cover

lost the plug must not be

used until a correct replacement is fitted. Correct replace-

ments are identified by the colour insert or the colour embos-

sed in words on the base of the plug. Replacement fuse covers

are available from your local electrical store.

CONNECTION TO A REWIREABLE

PLUG

the fitted plug is not suitable for your socket outlet, then it

should be cut off and disposed of in order to avoid a possi-

ble shock hazard should it be inserted into a 13A socket el-

sewhere. A suitable alternative plug should then be fitted to

the cable.

The wires in this mains lead are coloured in accordance with

the following code:

BLUE "NEUTRAL" ("N")

BROWN

LIVE

L")

GREEN AND YELLOW "EARTH" ("E)

The GREEN AND YELLOW wire must be connected to the

terminal in the plug which is marked with the letter

"E"

by the Earth symbol

or coloured green or green and

yellow.

2. The BLUE wire must be connected to the terminal which

marked with the letter "N" or coloured black.

The BROWN wire must be connected to the terminal which

marked with the letter

"L"

or coloured red.

For the Republic of Ireland only

The information given in respect of Great Britain will frequen-

tly apply, but a third type of plug and socket is also used, the

2-pin, side earth type. In this case, the wire which is coloured

GREEN AND YELLOW must be connected to the EARTH con-

tact, and the other

two

wires to the pins, irrespective of colour.

The supply to the socket must be fitted with a 16 amp fuse.

With the appliance plugged in, the interior light should come

on when the door is opened. After adjustment of the tempe-

rature, as indicated in the next chapter, the refrigerator

ready for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ignis arl 113 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info