Bedienungsanleitung Irox HBR555 (Seite 23 von 24) (Deutsch, Englisch, Französisch, Italienisch)

578938

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

74 75

7372

5c) HOW TO SET THE CLOCK MANUALLY

To set the clock manually, hold [MODE] for two

seconds it will show the weekday language. Use [ ]

or [ ] to change it. Press [ MODE ] to confirm.

Repeat the same procedure to set display language, ˚C/˚F,

UVI / MED/h, year, month, date, date-month format,

12/24, hour and minute.

During the setting, press and hold [ ] or [ ] will

increase or decrease the value rapidly.

For display language, you can choose among English (En),

German (DE), French (Fr), Italian (IT) and Spanish (SP) -

in that order. If there is an item you do not wish to change,

simply press [ MODE ] to bypass the item.

When you finished the change, press [ MODE ] to exit.

The display will return to the clock mode.

5d) HOW TO SET THE 2. TIME ZONE

To set the 2. time zone, change to the 2. time zone clock

mode and hold [ MODE ] for two seconds. Use [ ]

or [ ] to change it from -13h to +15h.

When you finished the change, press [ MODE ] to exit.

The display will return to the 2. time zone clock mode.

5e) DISABLE THE RECEPTION OF

THE RADIO CONTROLLED CLOCK

If you are using this product outside the central European

timezone, you may disable the reception of the radio

controlled clock, Press min. 3 Seconds the key [ ] to

disable the automatic time signal reception. The reception

signal [ ] will then disappear from the display.

To re-enable the time signal reception, press again for

min. 3 Seconds the [ ] key.

Arrow

indicator

Temperature

Humidity Trend

Steady FallingRising

4e) TEMPERATURE AND HUMIDITY TREND

The trend indicator shows the trend of temperatures and

humidity collected at that particular remote sight.

Three trends: rising, steady, and falling will be shown.

Indicator

displays

on the unit

Temperature

Range

Humidity

Range

Shows that the

Current

Environment

COM

WET

DRY

Indicator

40%RH-

70%RH

OVER

70%RH

Below

40%RH

70%RH

Ideal range for

both relative

humidity and

temperature

Contains excess

moisture

Contains

inadequate

moisture

No comment

20˚C to 25˚C

(68˚F to 77˚F)

-5˚C -+ 50˚C

(23˚F - 122˚F)

-5˚C -+ 50˚C

(23˚F - 122˚F)

Less than

20˚C (68˚F)

or More than

25˚C (77˚F)

4f) COMFORT LEVEL INDICATORS

The comfort level indicators COM, WET or DRY will tell you

if the current environment is comfortable, too wet or too dry.

The comfort indicators will appear on the display of the main

unit when the following conditions are satisfied:

5. RADIO CONTROLLED CLOCK

5a) HOW TO SET THE RADIO

CONTROLLED CLOCK

1. After the batteries are installed. The clock will

automatically search the radio signal. It takes about

3-5 minutes to finish this process.

2. If user wishs to disable the auto-reception feature, hold

the [ ] button for 2 seconds to disable it.

3. To enable the auto-reception feature again, holds the

“Up” for 2 seconds again to force it receive and allow

it receive at desired time.

4. If the radio signal is received, the date & time will be

set automatically with radio control signal icon [ ]

turns on.

5. If the clock fails to receive the time signal, it will be

show as [ ] icon. Then user can set the time manually.

5b) CALENDAR CLOCK DISPLAY MODES

The clock and the calendar share the same section of the

display. The calendar is displayed in a day-month format.

Each press on the [MODE] button will change the display

between clock with second, clock with day of week, zone

time with day of week.zone time with second and

day-month.

6. BELL / ALARM

6a) HOW TO SET AND ARM THE ALARM

To set an alarm,

1. Press [ALARM] once to display alarm time. If the alarm

is disarmed, the time will be displayed as “ OFF ”.

2. Hold [ALARM] for two seconds. The hour digits will

blink.

3. Enter the hour using [ ] or [ ].

4. Press [ALARM]. The minute digits will blink.

5. Enter the minutes using [ ] or [ ].

6. Press [ALARM] to exit.

7. Repeat the same procedure to set single alarm.

6b) HOW TO SET THE ZONE TIME

To set the zone time,

1. Press [MODE] until at zone time display mode,

2. Hold [MODE] for two seconds, the zone time offset

will be displayed.

3. Enter the offset using [ ] or [ ].

4. Press [MODE] to exit.

The alarm “ ” “ ” and “ Pre-AL” icons will be

displayed indicating which alarm is armed. You can also

arm or disarm an alarm by pressing the [ ],[ ] button

at alarm display mode. Press [MODE] to return to

clock display mode.

6c) SNOOZE FEATURE

When the alarm sound is on, press the snooze key enter

snooze mode. After 8 minutes, alarm sound will be

wake up automatically. The snooze cycle will be

restarted if you press the snooze key again.

If you leave the alarm sound on for 2 minutes, it will enter

snooze mode automatically with maximum 3 times.

6d) HOW TO STOP AN ALARM

Press [ALARM] on the unit to stop an alarm.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Irox HBR555 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info