Bedienungsanleitung ITT OutLimits B1 (Seite 1 von 1) (Englisch)

567065

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

Water-proof Sporting Bluetooth Headset

Outlimits B1 User Manual - English

1. Caution

• Do not attempt to service the unit yourself. Opening or removing covers may

expose you to dangerous voltages or other hazards. Please contact your local

reseller before you send the unit for repair.

• Follow local regulations in the country or region you are in, while you are driving

with headset.

• Storage at high temperatures (above 50°C/122°F), such as in a running vehicle

or under direct sunlight, may aect performance and eective battery life of the

headset.

• Design of this headset can eectively prevent the accumulation of harmful dust

and spilled liquids from any direction. But please do NOT put the headset or any

components from it into water.

• The headset, especially the embedded battery must be properly disposed or may

be recycled, contact your local recycling centers for disposal methods.

2. Headset Overview

1. Multi-function button

2. Volume +

3. Indicator

4. Volume -

5. Charging Port

6. SPK

7. Microphone

3. Specications

Item Specications and description

Bluetooth version 2.1+EDR

Support prole Headset Prole, Hands-Free Prole

Operating range Up to 30 feet (10 meters)

Standby time Up to 100 hours

Talking time Up to 5 hours

Charging time Approximately 2.5 hours

4. Charging

Insert the charging cable into the jack on the headset and the USB port on your PC

or USB adapter.

Charge the headset until the red indicator light turns o and the blue indicator

light turns on.

5. Turning on/o

Turn the headset on: hold the Multi-function button for 3 seconds until the blue

indicator light ashes 4 times.

Turn the headset o: hold the Multi-function button for 3 seconds until blue and red

indicator lights ash alternately.

6. Indicator Instruction

• Standby mode: In standby mode, the blue indicator light ashes every 3 seconds.

• Talking mode: When the headset is receiving a call, the blue indicator light ashes

every 8 seconds.

• Pairing mode: The blue indicator light keeps lit when the headset is waiting to be

discovered and paired.

• Low battery mode: In case that there is less than 10% of battery power left, the red

indicator light ashes. Please then recharge the battery.

8. Call Management

Some functions may not be supported by some phones.

In Standby mode

Press the Multi-function once button to:

• Answer an incoming call

• Redial the last called number

Press and hold multi-function button for at least 1 second to:

• Make a voice-activated call

• Reject an incoming call

In Active mode

Press the Multi-function button to:

• End a call

• Transfer a call from the phone to the headset

Press and hold Multi-function button for at least 1 second to:

• Place a call on hold

• Answer a new call

• Retrieve a call on hold

Press [+] or [-] to adjust the volume.

Press and hold [+] or [-] to turn the microphone o or on.

9. Maintenance

Outlimits B1 is a well-designed communication device, careful maintenance and

proper use will extend the product life and ensure its excellent performance.

Following maintenance procedures may be helpful to you:

• Always turn o and keep your headset in a safe place when it is not in use.

• Work in a high humidity condition: In order to keeping better performance, we

suggest keep the device dry, away from water, precipitation, humidity, moisture,

and various liquids that may corrode electronic circuits. If your device gets wet,

turn it o immediately and wait until the device gets dry completely before

using it.

• Do not store the device in high temperatures. Extremely high temperature could

aect performance of the headset, reduce battery life, and even damage the

mechanical parts of the headset.

• Do not store the device in extremely low temperature. The possible moisture

that forms after you taking the device to a warm place could damage the internal

electronic circuits.

• Avoid using chemical and any other detergent to clean the device. A clean and soft

cloth might be acceptable.

• Though the headset is designed to be shockproof, please avoid directly or

intentionally knock on any parts of the headset. Otherwise, will degrade product

performance, cause damages, and terminate warranty.

7. Pairing

1) Enter into pairing mode.

• Hold the Multi-function button when the headset is o for 6 seconds until the blue

indicator light remains lit after blinking.

• The headset will switch itself into pairing mode immediately after initial turning on.

2) Search for and pair the headset to your phone according to operation instruction

of the phone. (Bluetooth PIN: 0000)

• After pairing, the blue indicator light will ash 10 times rapidly before the headset

entering into Standby mode.

• If the blue indicator light remains lit, retry pairing.

3) Multi-pairing:

• After successfully paired with one mobile phone (named Phone 1), turn o

the Bluetooth function of Phone 1 and pair the headset with another mobile

phone(named Phone 2) according to normal pairing steps.

• After pairing with Phone 2, turn on the Bluetooth function of Phone 1, and the

headset will pair with Phone 1 automatically.

Note: Once the headset and the phone were successfully paired, the headset attempts

to reconnect the last connected phone automatically each time it turns on. Otherwise,

press the Multi-function button to reconnect.

B1 UM a4.indd 1 28/06/11 17.55

ITT OutLimits B1 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ITT OutLimits B1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info