Bedienungsanleitung Jablotron JA-60GSM (Seite 3 von 6) (Englisch)

554884

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

User manual JA-60GSM - 10 - MFJ51808

The emergency number can be entered by:

99 xx...x F0

where:

xxx…x is a telephone number (max. 20 digits), enter F9 before the number if you

need + prefix for international calls

4.6. Remote programming of the alarm via SMS

The command PRG is used for sending programming and operating commands to the alarm system.

It has the same effect as if the commands are entered on the alarm system keypad. Enter the following

command :

yyyyy∗PRG∗seq,seq,seq,

where:

yyyyy is the remote access code; factory default setting is 1111; this code can be changed,

see section 4.1

PRG is the command identification

seq are the programming or operating sequences, consisting of characters 0 to 9, F, N.

There can be more than one sequence in one SMS. The particular sequences must

be separated with a comma or period. The number of sequences in one SMS is only

limited by the maximum size of the SMS in the GSM network.

∗ separator (asterisk or space)

Example: if the control panel is disarmed and its master code is 1234, then if you want to set user code #2

for the alarm system, use the following command SMS: 1111

∗

PRG

∗

F61234 02 6789

After receiving this command message, the new user code (6789) will be added into the control panel.

4.7. Prepaid SIM cards

The JA-60GSM communicator can send information about the credit of a prepaid SIM card. An SMS

sent from any of the stored numbers (sequence 7t...) containing the word CREDIT followed by the

correct instruction (different for every provider) will result in the sending of the information about the

credit. Please ask your mobile phone provider for more information.

If you want to check the credit regularly use the following sequence.

CREDIT uuu..u xx yyy zz

where: uuu…u is the instruction given by the provider for receiving information about the amount

of credit

xx is the time period (in days) for every checking.

yyy is minimum level of credit

zz is a position of the credit in the information SMS sent by the provider

If the level of the credit is lower than set value (zz) the event “battery discharged GSM communicator”

will be sent to the preset telephone numbers. If the credit is restored the event “battery OK GSM

communicator” will be sent to the preset telephone numbers. To disable this function set the time (xx)

period to 00.

Note:

• The user is responsible for the level of the credit

• The producer does not recommend the use of prepaid cards.

User manual JA-60GSM - 3 - MFJ51808

Notes:

 The system confirms an AM command with a reply SMS.

 When system arming is impossible e.g. it is in the programming mode, you will be notified about the

situation via a reply SMS.

 If the alarm system is “split” the instruction will effect the section which belongs to the corresponding access

code

 If arming without a code is enabled on the control panel, the AM command can be used without any access

code. In this case the command performs the same action as if the keys F 1 are entered on a keypad.

1.6. Disarming via SMS (DM xxxx)

Command DM followed by a valid access code disarms the system. If the system is already

disarmed the command will be ignored.

Send SMS text to the dialer: DM∗xxxx

xxxx is a valid alarm system access code (Master or user)

∗ separator (asterisk or space)

Example: Sending of DM

∗

1234 will disarm the system in the same way as if the code 1234 is entered for

disarming on system’s keypad.

Notes:



The system confirms disarming via a reply SMS

 When system disarming is impossible – for example it is in the programming mode, you will be notified

about the situation via a reply SMS.

 If the alarm system is “split”, the instruction will effect the section which belongs to the corresponding access

code

 If the alarm system is split and the command (AM or DM) is followed by the user code, it will effect the

system the same way as if the code is entered from the alarm system keypad – no matter if AM or DM is

used (it will arm if the system is disarmed and it will disarm if the system is armed).

1.7. Mode request via SMS (MO)

Command MO can be used to read the current alarm system mode. The dialer will reply with a

reporting SMS to the phone which sent the MO command about status, level of GSM signal, GPRS

status, successfulness of transferring date to the CMSs .

Send SMS text to the dialer: MO

Example: If the system is armed, it will reply to the MO instruction with the SMS: Alarm system

reports: Control panel status: Armed,GSM:7,GPRS OK,MS1 NOT,MS2 OK

Note: if you want to protect this command by a password, set your own command text – see section 3.3.

1.8. Last event request by SMS (ME)

Instruction ME is used for reading the last event recorded in the alarm system’s memory. The dialer

will reply with a reporting SMS.

Send SMS text to the dialer: ME

Example: After a fire alarm, it will reply to the ME instruction with the SMS “ Alarm system reports:

Last event: Alarm end Control panel Time: 02.06. 19:48 “

Note: if you want to protect this command by a password, set your own instruction text – see 3.3.

1.9. Remote controlling of an appliance via SMS (AUXON, AUXOFF)

These commands can be used for operating the AUX output (e.g. heating in a house). The dialer

confirms the command performance via a reply SMS.

To switch on the AUX output, send SMS text: AUXON

To switch off the AUX output, send SMS text: AUXOFF

To switch on the PgX(Y) output, send SMS text: PGON

To switch off the PgX(Y) output, send SMS text: PGOFF

Example: to switch the heating on send SMS: AUXON

Note: texts of these commands can be customized and protected by a password – see section 3.3.

Jablotron JA-60GSM Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jablotron JA-60GSM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info