Bedienungsanleitung Jablotron JA-65 MAESTRO (Seite 28 von 30) (Englisch)

554834

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Alarm system JA-65 MAESTRO - 28 - MFM51202

JA-60F Wireless keypad - can operate system in exactly the same way as the wired keypad JA-60E. It can also be used

for programming and testing of the system. The alarm system's status is indicated by the LED indicators, the built in LED

display and buzzer. Illuminated keys can be covered with a bottom - swinging cover. The keypad has TWO-WAY

communication with the control panel and it can be enrolled as a controller (positions c1 to c8). Multiple JA-60F keypads

can be enrolled to a single control panel. It is powered with four AAA batteries, battery life time 1 year, radio

communication distance (open area, no interference) is about 40 meters, indoors the distance from the control panel

should not exceed 10 meters

. As an option the keypad can also be powered by a DC adapter (the keys are permanently

illuminated in this case).

Wireless siren JA-60A is designated for outdoor use. It is powered from its own AC adapter and it has a built in back up

battery. The siren wirelessly communicates with the control panel. It contains a high powered siren and a flashing light.

Besides signaling alarms, it can also provide arming and disarming chirps. The siren has built in tamper detectors. Only

one JA-60A siren can be used with each JA-65 control panel. The siren has cover class IP44 and TWO-WAY

communication with the control panel, radio communication distance 100m. An optional external antenna AN-01 can be

used with the siren for an even better working range.

Wireless outputs unit UC-216 is a receiver, which receives signals from the JA-65 control panel. The unit has two output

relays (X and Y, max. load 120V / 1A each). These relays have identical functions as outputs PgX and PgY of the control

panel. The unit requires external power from 12 to 24VDC or 15VAC. Multiple UC-216’s can be used with a control panel

and each UC-216 can receive signals from more than one control panel. The module can also be used directly with JA-60

wireless detectors or controllers.

Wireless output unit UC-222 is a receiver, which receives signals from the JA-65 control panel. The unit has a power

output relay (max. 250VAC / 5A). This relay has an identical function as output PgX of the control panel. The unit is

powered directly from the AC power (230 VAC). Multiple UC-222’s can be used with a control panel and each UC-222

can receive signals from more than one control panel. The module can also be used directly with JA-60 wireless detectors

or controllers.

24.2. The JA-6x system items:

JA-60E Wire operated keypad - can be used to operate and program the system. It is connected to the control panel by

a cable. Up to five keypads can be wired to a single control panel. The alarm system's status is indicated by the LED

indicators, the built in display and built in buzzer. Illuminated keys can be covered with a closable cover.

PC interface cable PC-60A - can be used to connect the control panel to a serial port (COM) in your computer. Suitable

SW, ComLink, is provided on a floppy disk or you can visit Jablotron’s Internet home page at: www.jablotron.com to

download a beta version of it. The software is a convenient way to setup the control panel, to supervise the system which

is on line, to read, view and store data from the event memory and to record other information about the system. The

software can be installed under MS Windows system.

Modem JA-60U - can be used for remote access from the user's or installer's PC. The modem is supported by Comlink

software. It can be used not only for programming and trouble shooting, but also to operate and check the system

remotely. The JA-60U modem comes with an AC adapter, PC data cable (for COM) and Comlink SW installing disc. The

modem is designed for ordinary analog telephone lines (TNV-3 type).

24.3. Wire operated items

SA-200, SA-201 Magnetic door sensors - can be used as door or window opening sensors. The built in reed contact opens

when the magnet more far than 25mm.

JS-11 Movement detector - PIR sensor which uses digital processing of the signal for a high false alarm immunity. Coverage

12m/60°. Optional lenses (long corridor, pet zone) are available for this detector. The detector has a high RF signal immunity,

stand by consumption 10mA/12VDC.

GBS-200 glass break detector - its sensor covers an entire room (up to 9m), regardless of the number of windows. A

dual technology detection method (air pressure and sound analysis) is combined with digital processing to guarantee high

sensitivity to the breaking of all types of glass (Plate, Tempered, Laminated, Wired). It has stand by consumption

15mA/12VDC.

SD-112 Smoke detector - triggers a Fire alarm when smoke is detected. It also has a built in siren. A built in ionic

chamber ensures high stability of the sensor. It has stand by consumption 5mA/12VDC.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron JA-65 MAESTRO Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jablotron JA-65 MAESTRO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info