Bedienungsanleitung Jablotron UC-230 (Seite 2 von 2) (Englisch)

555021

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

UC-230 Remote Control Switch 2/2 MEW51204

Some practical applications of the UC-230

1. Forgotten corridor switch

If it is required to control light from different places (e.g. in a corridor or

passage) and this was “forgotten“ when the electric installation was

designed, the solution is simple. The existing light switch will be

replaced with the UC-230 and up to 8 RC-22 remote controls can be

used to control it from a distance.

2. Bathroom light switch

If you want to control light in a bathroom from a place where ordinary

switch cannot be used for safety reasons (close to the bath tub or

wash basin), you can replace the ordinary switch with a UC-230. An

RC-22 remote control can safely switch it on or off.

3. Outdoor lighting control

When you arrive at your house you can use the RC-11 remote control

(usually used to control a Jablotron car alarm or automobile’s central

locking) to switch on an outdoor light. In order to do this you should

enroll the simultaneous pressing of both RC-11 buttons to the UC-230

in the overswitching mode or in the 2 minutes pulse mode.

4. Automatic corridor light

If you replace the ordinary light switch with the UC-230 one, you can

enroll the JA-60 wireless detectors to it. Usually the JA-60N door

contact is used (triggering the switch if a door is opened) or JA-60P

motion detector (triggering the switch if human monition is detected).

At the same time the detectors can be part of the security system.

When the JA-60P is used with the UC-230, the battery saving feature

must be set to the Energy saving level. You have to press and keep

pressed the tamper switch when inserting batteries in the detector.

This way the sleeping mode will be set to 1 minute.

5. Switching the lights permanently off

You can switch off the UC-230 manually and override the triggering

signals from enrolled JA-60 detectors (e.g. during the daylight). This

status is indicted by the flashing red LED.

6. Wireless doorbell with automatic light switch

The RC-28 doorbell button is usually used with the UC-260 acoustic

indicator creating a wireless doorbell. You can also enroll the RC-28 to

the UC-230 in a pulse mode. When the RC-28 is pressed both the UC-

260 will sound and a light can be switched on. This way you can light

up the entrance hall or indicate a visitor to people with poor hearing.

The triggered light may also prevent intruders entering your house

during your absence.

7. Child switch

If a small child is in the house, sometimes it is difficult for him to switch

on the lights. You can help him if your replace the ordinary switch with

the UC-230 and place RC-22 remote switches on the wall at a desired

height.

Note: Although this product does not contain any harmful materials we

suggest you to return the product to the dealer or directly to the producer after

usage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron UC-230 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info