Bedienungsanleitung JBL BassPro Go (Seite 2 von 9) (Englisch)

809288

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

JBL BASSPRO GO

600mm（23-5/8")

56mm(2-3/16")

39.8mm(1-9/16")

5000mm(196-7/8")

402.5mm（15-7/8")

28.1 `mm（1-1/8")

297.9mm(11-11/16")

183.6mm(7-3/16")

198.7mm(7-13/16")

208.4mm(8-3/16")

24.3mm(15/16")

14.0mm(9/16")

φ5mm(3/16")

20.0mm(13/16")

190.9mm(7-1/2")

Connection cable Mounting plate

RBC remote bass control with cable

Basspro Go Basspro Go+Mounting plate

RCA adapter Mounting screw

34.8mm(1-3/8")

402.5mm (15-7/8")

183.6mm (7-3/16")190.9mm (7-1/2")

III. INSTALLATION AND WIRING

IMPORTANT: Disconnect the vehicle’s negative (–) battery

terminal before beginning the installation.

• Wear protective eyewear when using tools.

• Choose a safe mounting location. Check clearances on both

sides of the location. Be sure that screws will not puncture

brake or fuel lines or wiring harnesses, and that wire routing will

not interfere with vehicle operation. Use caution when drilling

or cutting.

• When making electrical connections, make sure they are

secure and properly insulated.

• Using the dock as a template, mark the locations of the holes

on the mounting surface.

• Drill pilot holes in the mounting surface.

• Attach the dock to the mounting surface with the included

sheet metal screws and washers.

A. Mounting the dock in the vehicle

Use the included sheet metal screws to secure the dock to the

mounting surface in the vehicle. Ensure that the included wire

is long enough to reach the desired mounting location before

securing the dock.

THANK YOU FOR YOUR

PURCHASE . . .

Your product has been designed to provide you the performance

and ease of operation you expect from JBL. Take time to read

this manual before operating or installing your BassPro Go. This

manual describes general installation guidelines and operation

instructions. Please note that proper installation of mobile audio

components requires qualiﬁed experience with mechanical and

electrical procedures. If you do not have the knowledge and tools

to perform this installation, we strongly recommend consulting an

authorized JBL dealer about your installation options.

I. PRODUCT DESCRIPTION

JBL BassPro Go is a powered subwoofer designed to easily

mount and charge in any vehicle. It acts as a subwoofer or a

full-range speaker in the vehicle; and, with its quick-disconnect

feature, becomes a portable Bluetooth speaker. It features easy-

to-use controls and a convenient safety cover to help protect the

speaker when used out of the vehicle, and to provide an IPx5

marine rating.

II. WHAT'S IN THE BOX

1x portable speaker 1x remote bass

controller

Mounting hardware

1x vehicle mounting

dock

2x high-level input

adapters

2x JBL stickers

1x wiring harness

with in-line fuse

1x spare fuse 1x owner’s manual

2X 1X 4X

2X 1X

PULL

JBL BassPro Go_owners manual_SOP_V6.indb 2JBL BassPro Go_owners manual_SOP_V6.indb 2 11/23/2020 5:52:56 PM11/23/2020 5:52:56 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL BassPro Go Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JBL BassPro Go

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info